Aerosols containing disease-causing microorganisms are produced during oral diagnosis and treatment can cause secondary contamination.

To investigate the use of graphene material for air disinfection in dental clinics by leveraging its adsorption and antibacterial properties.

Patients who received ultrasonic cleaning at our hospital from April 2023 to April 2024. They were randomly assigned to three groups (n = 20 each): Graphene nanocomposite material suction group (Group A), ordinary filter suction group (Group B), and no air suction device group (Group C). The air quality and air colony count in the clinic rooms were assessed before, during, and after the procedure. Additionally, bacterial colony counts were obtained from the air outlets of the suction devices and the filter screens in Groups A and B.

Before ultrasonic cleaning, no significant differences in air quality PM2.5 and colony counts were observed among the three groups. However, significant differences in air quality PM2.5 and colony counts were noted among the three groups during ultrasonic cleaning and after ultrasonic treatment. Additionally, the number of colonies on the exhaust port of the suction device and the surface of the filter were significantly lower in Group A than in Group B (P = 0.000 and P = 0.000, respectively).

Graphene nanocomposites can effectively sterilize the air in dental clinics by exerting their antimicrobial effects and may be used to reduce secondary pollution.

In recent years, flexible sensors based on laser-induced graphene (LIG) have played an important role in areas such as smart healthcare, smart skin, and wearable devices. This paper presents the fabrication of flexible sensors based on LIG technology and their applications in human-computer interaction (HCI) systems. Firstly, LIG with a sheet resistance as low as 4.5 Ω per square was generated through direct laser interaction with commercial polyimide (PI) film. The flexible sensors were then fabricated through a one-step method using the as-prepared LIG. The applications of the flexible sensors were demonstrated by an HCI system, which was fabricated through the integration of the flexible sensors and a flexible glove. The as-prepared HCI system could detect the bending motions of different fingers and translate them into the movements of the mouse on the computer screen. At the end of the paper, a demonstration of the HCI system is presented in which words were typed on a computer screen through the bending motion of the fingers. The newly designed LIG-based flexible HCI system can be used by persons with limited mobility to control a virtual keyboard or mouse pointer, thus enhancing their accessibility and independence in the digital realm.

Particle size removal efficiencies for 0.1-1.0 μm ( PSE 0.1 - 1.0 $$ {PSE}_{0.1-1.0} $$ ) and 0.3-1.0 μm ( PSE 0.3 - 1.0 $$ {PSE}_{0.3-1.0} $$ ) diameter of Minimum Efficiency Reporting Value (MERV) filters, an electrostatic enhanced air filter (EEAF), and their two-stage filtration systems were evaluated. Considering the most penetrating particle size was 0.1-0.4 μm particulate matter (PM), the PSE 0.1 - 1.0 $$ {PSE}_{0.1-1.0} $$ as an evaluation parameter deserves more attention during the COVID-19 pandemic, compared to the PSE 0.3 - 1.0 $$ {PSE}_{0.3-1.0} $$ . The MERV 13 filters were recommended for a single-stage filtration system because of their superior quality factor (QF) compared to MERV 6, MERV 8, MERV 11 filters, and the EEAF. Combined MERV 8 + MERV 11 filters have the highest QF compared to MERV 6 + MERV 11 filters and EEAF + MERV 11 filters; regarding 50% of PSE 0.1 - 1.0 $$ {PSE}_{0.1-1.0} $$ as the filtration requirements of two-stage filtration systems, the MERV 8 + MERV 11 filtration system can achieve this value at 1.0 m/s air velocity, while PSE 0.1 - 1.0 $$ {PSE}_{0.1-1.0} $$ values were lower than 50% at 1.5 m/s and 2.0 m/s. EEAF obtained a better PSE 0.3 - 1.0 $$ {PSE}_{0.3-1.0} $$ in the full-recirculated test rig than in the single-pass mode owing to active ionization effects when EEAF was charged by alternating current.