Clinically, data on the association of early-life secondhand smoke (SHS) exposure with sleep bruxism and dental problems are scarce.

To examine whether the relationship between early-life SHS exposure with sleep problems, sleep bruxism, and dental problems in children.

Within the scope of this study, questionnaires were applied to the volunteer parents of 710 children, aged 5-12 years old. The questionnaire applied in this study named as Children's Sleep Habits Questionnaire (CSHQ) and consists of seven subscales and a total of 33 items. The questionnaire was completed retrospectively by any parent, and the presence of sleep bruxism was questioned during the anamnesis. Afterward, the presence of dental decay and tooth wear was evaluated during intraoral and radiographic examinations. Dental decay and tooth wear were scored with the DMFT/deft index and tooth wear index of Smith & Knight, respectively.

The presence of sleep bruxism was significantly higher in children with parasomnia (p = 0.01; p < 0.05). The presence of tooth wear in children with sleep bruxism was found to be statistically significant (p = 0.032; p < 0.05). It was observed that the presence of sleep bruxism was higher in the children of individuals who smoked at home (p = 0.027; p < 0.05).

Sleep bruxism, untreated dental decay and exposure to early-life secondhand smoke may have a negative impact on children's sleep habits and characteristics.

Tooth wear is a multifactorial process resulting in the loss of dental hard tissues. For its assessment, the tooth wear evaluation system (TWES) 2.0 has been published. Previous studies on the TWES involved well-trained practitioners, rather than nonexperts.

The first aim of this study was to investigate the reliability of the assessment of tooth wear severity on dental hard tissues, using the TWES 2.0, by nonexperts. The second aim was to investigate the reliability of assessment of wear severity on dental restorations, using a third scale.

Forty-seven dental students evaluated at least 9 of 14 possible patient cases on dental casts and intraoral photographs. Cohen's kappa (agreement with sample solution) and Fleiss' kappa (Inter-rater reliability) were calculated.

The agreements of the operators' ratings compared to the sample-solution resulted in Cohen's kappa between 0.02 and 0.9. The agreements were 0.34 for occlusal; 0.43 for vestibular; 0.57 for oral surfaces. Inter-rater reliability (Fleiss' kappa) was 0.35 for occlusal, 0.17 for vestibular and 0.24 for oral assessment. The inter-rater reliability of the ratings on tooth surfaces with restorations was lower with 0.21 (occlusal), 0.14 (vestibular) and 0.39 (oral). The agreement on different restorations differed tremendously.

The ability to correctly assess the cases varied considerably between individual examiners. Within the limits of this study, assessment of restorations was slightly more challenging compared to natural teeth, particularly in occlusal regions or when the restorative material is gold. Subsequent studies should address whether enhanced training and improved definition of tooth wear grades result in higher reliability scores.

Eurybiomic big cats are facing significant threats from poaching, which is driven by recreation, taxidermy and wildlife trade. Species identification and age estimation are important for effective conservation management and enforcement of wildlife protection regulations. In this study, we present novel comprehensive morphometric methods for species identification and age estimation in leopards (Panthera pardus fusca) using canine and claw, the major trade articles. The study included 42 canines and 135 claw samples from five known age groups collected during post-mortem examination from all over the state of Tamil Nadu in south India. The samples were visually examined, and key morphological traits were accurately examined. Radiographic assessment of canines revealed the chronological age estimation, and tooth wear observation afforded supportive insight and evidence for the standards. Micro-feature observations of canine and claw samples using a scanning electron microscope ascertained the credibility of the samples. Multi-dimensional assessment of species and age of the samples by morphometric method led to the development of a reliable and accessible tool for dealing with confiscated specimens or samples with limited DNA quality. Notably, our novel methodology demonstrates efficacy in identifying illegally traded leopard canines and claws without causing any damage to the sample, thereby fortifying legal efforts against wildlife trafficking. In conclusion, this research introduces a sophisticated framework for species discrimination and age stratification in Panthera pardus fusca, merging cutting-edge technologies with classical morphometric analyses. The derived insights not only advance our understanding of leopard ecology but also furnish critical tools for conservationists and law enforcement agencies combating the illicit wildlife trade.

Hypophosphatasia (HPP) is a rare inherited disease that affects multiple organ systems including bone and teeth. Limited knowledge exists on dental and oral health in patients with adult-onset HPP (aHPP).

The aim of this study was to investigate oro-dental characteristics in patients with aHPP compared to healthy controls.

This case-control study included 20 patients with aHPP compared to 31 healthy controls. Oro-dental manifestations were examined by standardised interviews, clinical examinations as well as radiological registrations on panoramic radiograph (OP) and cone-beam computed tomography (CBCT) scans.

The subjective experience of tooth fractures (p = 0.010), caries in permanent teeth (p = 0.032) and early loss of permanent teeth (p = 0.002) was significantly higher in patients with aHPP compared to the controls. In the aHPP group, the presence of specific teeth (p ≤ 0.045) and attrition of 11 were significantly lower (p = 0.012) compared to the controls. Opacity of a few teeth (p ≤ 0.049), presence of denticles (p = 0.024), the distance between the enamel-cement junction (CEJ) and the marginal bone level at specific sites (p ≤ 0.021) and crown height of 11 (p = 0.017) were significantly higher in patients with aHPP than in healthy controls.

The results indicate that patients with aHPP have a subjective experience of having poorer dental health. Loss of permanent teeth, less attrition, tooth opacities, denticles and larger distance between CEJ and marginal bone level are possible oro-dental findings in patients with aHPP.

Artificial intelligence (AI) can assist in medical diagnosis owing to its high accuracy and efficiency. This study aimed to develop a diagnostic system for automatically determining the degree of tooth wear (TW) using intraoral photographs with deep learning.

The study included 388 intraoral photographs. A tooth segmentation model was first established using the Mask R-CNN architecture, which incorporated U-Net and SGE attention mechanisms. Subsequently, 2774 individual tooth images output from the segmentation model were included into the classification task, labeled and randomized into training, validation, and test sets with 6.0:2.0:2.0 ratio. A vision transformer model optimized using a mask mechanism was constructed for TW degree classification. The models were evaluated using the accuracy, precision, recall, and F1-score metrics. The time required for AI analysis was calculated.

The accuracy of the tooth segmentation model was 0.95. The average accuracy, precision, recall, and F1-score in the classification task were 0.93, 0.91, 0.88, and 0.89, respectively. The F1-score differed in different grades (0.97 for grade 0, 0.90 for grade 1, 0.88 for grade 2, and 0.82 for grade 3). No significant difference was observed in the accuracy between different surfaces. The AI system reduced the time required to grade an individual tooth surface to 0.07 s, compared to the 2.67 s required by clinicians.

The developed system provides superior accuracy and efficiency in determining TW degree using intraoral photographs. It might assist clinicians in the decision-making for TW treatment and help patients perform self-assessments and disease follow-ups.

Tooth wear is the loss of dental hard tissue due to chemical and mechanical processes, and its prevalence ranges from 13 to 80 % in the general population. Management depends on understanding potential risk factors; however, the role of saliva as one of them is not completely understood. The aim of this study was to explore the relationship between salivary pH and flow, and tooth wear in patients referred to a specialized dental clinic for tooth wear management.

Data used in this study included stimulated (SWS) and unstimulated whole salivary (UWS) pH and flow rate. Dependent variables were the average occlusal Tooth Wear Index (TWI) and the average of the surfaces with the maximum Tooth Wear Evaluation System 2.0 score (TWES). Univariate and multivariate linear regression models were utilized, including a multivariate analysis without outliers. Sex and age were added as confounders.

A total of 159 patients were included in this study. The average age of the individuals was 37.1 (± 9.1) years and 34 (21 %) were female. Univariate models showed a statistically significant association between both TWI and SWS pH. Multivariate models showed that the negative associations between SWS (β = -0.20, C.I. = -0.36 - -0.03 [TWI]; β = -0.12, C.I. = -0.22 - -0.02 [TWES]) and UWS pH (β = -0.12, C.I. = -0.26 - 0.02 [TWI]; β = -0.09, C.I. = -0.18 - 0.00 [TWES]) and tooth wear were largely unaffected by confounders. These associations were also robust against outliers. A relevant association with flow rate was not detected.

This study shows that salivary pH was inversely associated with tooth wear severity even after correction for confounders, such as flow rate, age, and sex. This association was especially significant for SWS. Although no causal relationship can be established, the results suggest a role of salivary pH in tooth wear in patients with moderate to severe tooth wear. No association was found between tooth wear and flow rate.

To report and compare the survival of minimally invasive direct and indirect restorations of different materials for restoring the worn dentition.

A systematic search was conducted in six databases: MEDLINE, Web of Science, Scopus, CENTRAL, VHL, and EMBASE. The eligibility criteria of this systematic review used the PICO framework to address the following research question: "In dentate patients with a worn dentition (P), does rehabilitating their lost tooth structure with indirect restorations (I) or direct (C) effect the survival and success of treatment (O)?". Study characteristics, survival rates of the restorations were extracted from each article. No language restrictions were applied. Survival and prevalence estimates were calculated using random-effect models.

The electronic search yielded 5009 entries, resulting in 14 publications selected for full-text analysis. These included 2 RCTs, 7 prospective, and 5 retrospective studies, with a varying level of methodological quality. This included 52% direct and 48% indirect restorations, using varying materials and follow-up periods. The survival of direct composite resin restorations versus indirect manually processed composite resin restorations showed no significant difference (n = 2; OR, 1.79 [95% CI, 0.64-5.05]; p = 0.270). For the prospective articles, the pooled prevalence estimates of the survival restorations were; direct (n = 3; 99% [95% CI, 0.97-1.00]) and; indirect (n = 5; 100% [95% CI, 0.99-1.00]). Lithium disilicate recorded the least amount of failures at 1.8%.

Although the survival estimates of indirect manually processed and direct composite resins were not significantly different, indirect restorations-especially those made of lithium disilicate ceramic-may offer better survival rates, compared to direct resin restorations in patients with worn dentition.

Despite the limited evidence, indirect ceramic restorations appear to be well-suited for long-term treatment of worn dentition, whilst direct composite resin restorations are more suited as an medium-term solution.

Hereditary dentine disorders are autosomal dominant diseases that affect the development and structure of dentine, leading to various dental abnormalities and influencing the individual's oral health. It is generally classified as dentinogenesis imperfecta (DGI) and dentine dysplasia (DD). Specifically, DGI is characterized by the abnormal formation of dentine, resulting in teeth that are discolored, translucent, and prone to fracture or wear down easily. DD is characterized by abnormal dentine development, manifested as teeth with short roots and abnormal pulp chambers, leading to frequent tooth loss. Up to now, the pathogenesis of hereditary dentine disorders has been poorly clarified and the clinical intervention is limited. Treatment for hereditary dentine disorders focuses on managing the symptoms and preventing further dental problems. Genetic counseling and testing may also be recommended as these conditions can be passed on to future generations. In this review, we summarize the clinical features, pathogenic genes, histomorphological characteristics and therapy of hereditary dentine disorders. Due to the limited understanding of the disease at present, we hope this review could improve the recognition of the disease by clinicians, stimulate more scholars to further study the deeply detailed mechanisms of the disease and explore potential therapeutic strategies, thus achieving effective, systematic management of the disease and improving the life quality of patients.

No study has quantitatively assessed tooth wear using a clinical quantitative light-induced fluorescence (QLF) system. This study aimed to compare fluorescence parameters (ΔFwear) between the research QLF system (QLF-D) and clinical QLF system (Qraycam Pro) and evaluate the validity of both systems in detecting dentin exposure from tooth wear.

Thirty-five human molars and premolars were collected. Two blinded examiners conducted evaluations. Images from QLF-D and Qraycam Pro were captured and analyzed by the first examiner to calculate ΔFwear, representing the maximum fluorescence intensity for occlusal wear. The stage of tooth wear was determined by the second examiner using the tooth wear index (TWI). The area of interest (AOI) was determined as the cusp without defects, such as caries or fractures. Only areas mutually agreed by both examiners were included in analysis. The Kruskal-Wallis test was conducted to assess differences in ΔFwear between two devices. ROC analysis evaluated the validity of both systems in determining dentin exposure using AUROC.

Thirty-eight AOIs were analyzed. ΔFwear significantly increased with higher TWI scores. Median ΔFwear for TWI scores (0, 1, and 2) were 6.9 %, 10.3 %, and 24.8 %, respectively, for QLF-D, and 5.7 %, 7.7 %, and 23.9 %, respectively, for Qraycam Pro. No significant differences in ΔFwear were observed between QLF-D and Qraycam Pro for any TWI score. The AUROC for both systems was 0.95.

ΔFwear was comparable between QLF-D and Qraycam Pro and demonstrated high validity in detecting dentin exposure. These findings support the clinical application of the QLF for quantitative tooth wear assessment.

Bruxism is a behaviour that has several consequences in an individual's life, especially when it starts in childhood. However, bruxism can be a potential protective factor, which is an attribute that reduces the chance of a negative health outcome.

To evaluate the incidence of sleep bruxism (SB) and dental wear in children and adolescents.

This longitudinal study began in 2014 and 2016 (baseline) with initial 1816 children followed for 5 and 3 years, respectively. The follow-up data collection started in 2019. The diagnosis of SB was parents report (baseline) and self-report (follow-up) due to age groups of each phase, and questions related to symptoms of SB were collected. Five calibrated examiners (kappa >0.7) collected the clinical data. The clinical variables were dental erosion and dental wear. Contextual, individual, behaviour and clinical characteristics were collected. A multilevel logistic regression model was used to investigate the association of contextual, individual, behaviour and clinical characteristics with SB. Poisson regression for repeated measures was performed to evaluate the incidence of SB and dental wear (incidence rate ratio-IRR and confidence interval-95% CI).

Two hundred and fifty-three children and adolescents answered questionnaires and were clinically examined. The mean age of the follow-up in 2019 was 11.25 years old (±2.19). There was no increase in the incidence of SB (95% CI: 0.74-1.35). Children/adolescents had a 2.2 higher risk to present dental wear (95% CI: 1.89-2.60). SB at the follow-up was associated with the contextual variable, earache, erosion and awake bruxism.

In this population, children with SB remained with this behaviour and showed higher dental wear over the years.

This study aimed to develop and evaluate a fully automated method for visualizing and measuring tooth wear progression using pairs of intraoral scans (IOSs) in comparison with a manual protocol.

Eight patients with severe tooth wear progression were retrospectively included, with IOSs taken at baseline and 1-year, 3-year, and 5-year follow-ups. For alignment, the automated method segmented the arch into separate teeth in the IOSs. Tooth pair registration selected tooth surfaces that were likely unaffected by tooth wear and performed point set registration on the selected surfaces. Maximum tooth profile losses from baseline to each follow-up were determined based on signed distances using the manual 3D Wear Analysis (3DWA) protocol and the automated method. The automated method was evaluated against the 3DWA protocol by comparing tooth segmentations with the Dice-Sørensen coefficient (DSC) and intersection over union (IoU). The tooth profile loss measurements were compared with regression and Bland-Altman plots. Additionally, the relationship between the time interval and the measurement differences between the two methods was shown.

The automated method completed within two minutes. It was very effective for tooth instance segmentation (826 teeth, DSC = 0.947, IoU = 0.907), and a correlation of 0.932 was observed for agreement on tooth profile loss measurements (516 tooth pairs, mean difference = 0.021mm, 95% confidence interval = [-0.085, 0.138]). The variability in measurement differences increased for larger time intervals.

The proposed automated method for monitoring tooth wear progression was faster and not clinically significantly different in accuracy compared to a manual protocol for full-arch IOSs.

General practitioners and patients can benefit from the visualization of tooth wear, allowing quantifiable and standardized decisions concerning therapy requirements of worn teeth. The proposed method for tooth wear monitoring decreased the time required to less than two minutes compared with the manual approach, which took at least two hours.

This systematic review assessed the morphological characteristics of non-carious cervical lesions (NCCL), among clinical and ex-vivo studies assessed by observational and imaging methods.

The search strategy was conducted on four online databases (MEDLINE, Embase, Scopus and Web of Science) and grey literature (Google Scholar and OpenGrey). The study selection was performed by three reviewers from March to September (2023). The eligibility criteria were established according to the PICO strategy and included NCCL, morphological characteristics and clinical and ex-vivo study designs. The data extraction considered general data that identifies the study, evaluation method, parameter to assess the outcome and the main results for each study. The risk of bias was evaluated using Joanna Briggs Institute critical appraisal tool, and a personalized tool.

The search resulted in 252 studies. A total of 14 studies were included. Prevalence of NCCLs ranged from 3.5 %to 77.78 % with a higher presence in premolars. Common characteristics were wear facets, occluded tubules or cracks, occlusal stress, scratch marks, dimples and craters, structure loss, and dentin sclerosis, which appear more often on buccal surface and were generally classified as wedge-shaped, saucer-shaped. Etiological hypothesis was mainly related to multifactorial factors. In most of the studies, the risk of bias was classified as high.

The morphological characteristics of NCCL showed a wide range of descriptions regarding appearance, prevalence, lesion-related measures, and macro and microscopic descriptions.

The aim of this study was to evaluate the accuracy of a combined approach based on an isotopological remeshing and statistical shape analysis (SSA) to capture key anatomical features of altered and intact premolars. Additionally, the study compares the capabilities of four Machine Learning (ML) algorithms in identifying or simulating tooth alterations.

113 premolar surfaces from a multicenter database were analyzed. These surfaces were processed using an isotopological remeshing method, followed by a SSA. Mean Euclidean distances between the initial and remeshed STL files were calculated to assess deviation in anatomical landmark positioning. Seven anatomical features were extracted from each tooth, and their correlations with shape modes and morphological characteristics were explored. Four ML algorithms, validated through three-fold cross-validation, were assessed for their ability to classify tooth types and alterations. Additionally, twenty intact teeth were altered and then reconstructed to verify the method's accuracy.

The first five modes encapsulated 76.1% of the total shape variability, with a mean landmark positioning deviation of 10.4 µm (±6.4). Significant correlations were found between shape modes and specific morphological features. The optimal ML algorithms demonstrated high accuracy (>83%) and precision (>86%). Simulations on intact teeth showed discrepancies in anatomical features below 3%.

The combination of an isotopological remeshing with SSA showed good reliability in capturing key anatomical features of the tooth.

The encouraging performance of ML algorithms suggests a promising direction for supporting practitioners in diagnosing and planning treatments for patients with altered teeth, ultimately improving preventive care.

The objective of this study was to evaluate how effectively the bioelectric toothbrush can alleviate dentin hypersensitivity (DHS) by using electrostatic forces to remove biofilm from the tooth surface.

This study divided inpatients of a preventative dental clinic between March and October 2023 into the following two groups: a bioelectric toothbrush group (BET, n = 25) and a non-bioelectric toothbrush group (NBET, n = 18) as a control group. This was a randomized double-blind, placebo-controlled trial study. A survey, the number of hypersensitive teeth, the O'Leary index, the visual analogue scale (VAS), and the Schiff Cold Air Sensitivity Scale (SCASS) were also investigated.

When fluoride toothpaste was applied with a bioelectric toothbrush, the subjects' VAS and SCASS scores reflecting symptoms of hyperesthesia significantly decreased over time, as did the number of hypersensitive teeth and the O'Leary index. Moreover, the bioelectric toothbrush was confirmed to be effective in removing dental plaque.

Dental clinics must actively promote bioelectric toothbrushes and fluoride toothpaste for patients suffering from hyperesthesia and pain. Furthermore, these items can be suggested as preventative oral care products to patients with potential hyperesthesia.

Tooth cervical abrasion (CA) is a prevalent non-carious cervical lesion that poses challenges for accurate diagnosis from periapical radiographs due to difficulties in assessing the lesion's extent, associated bone loss, and pulpal involvement. The presence of overlying bone structures on the palatal side when lesions are located on the buccal side, or vice versa, further complicates radiographic interpretation. So it is important to define the lesions in all three dimensions.

To provide a three-dimensional descriptive classification for cervical abrasion lesions using Cone Beam Computed Tomography (CBCT).

A total of 50 patients with cervical abrasion were selected for the study. From these patients, teeth (n = 10) from each of the four different quadrants were chosen. A CBCT scan with a 6 × 6 cm field of view (FOV) was performed, and the DICOM files of the cervical lesions were transferred to 3-D imaging software. The CBCT images of the cervical abrasion lesions were assessed at the level of the deepest point of the lesion along the long axis of the tooth in both axial and sagittal planes. The height (A), buccolingual dimension (B), circumferential spread (C), and remaining dentine thickness (D) were evaluated and classified using new scoring criteria for each dimension. The reliability and reproducibility of the classification were assessed to ensure its clinical applicability.

CBCT can be utilized to classify tooth cervical abrasion in endodontics, enhancing diagnosis, analysis, and treatment outcomes. This three-dimensional view facilitates easier communication among clinicians, allows for tailored treatment approaches, and opens new avenues for research.

Osteogenesis imperfecta (OI) is a group of inherited connective tissue disorders of varying severity characterized by bone fragility. The primary objective of this international multidisciplinary collaboration initiative was to reach a consensus for a standardized set of clinician and patient-reported outcome measures, as well as associated measuring instruments for dental care of individuals with OI, based on the aspects considered important by both experts and patients. This project is a subsequent to the Key4OI project initiated by the Care4BrittleBones foundation which aims to develop a standard set of outcome measures covering a large domain of factors affecting quality of life for people with OI. An international team of experts comprising orthodontists, pediatric dentists, oral and maxillofacial surgeons, and prosthetic dentists used a modified Delphi consensus process to select clinician-reported outcome measures (CROMs) and patient-reported outcome measures (PROMs) to evaluate oral health in individuals with OI. Important domains were identified through a literature review and by professional expertise (both CROMs and PROMs). In three focus groups of individuals with OI, important and relevant issues regarding dental health were identified. The input from the focus groups was used as the basis for the final set of outcome measures: the selected issues were attributed to relevant CROMs and, when appropriate, matched with validated questionnaires to establish the final PROMs which represented best the specific oral health-related concerns of individuals with OI.

Consensus was reached on selected CROMs and PROMs for a standard set of outcome measures and measuring instruments of oral health in individuals with OI.

Our project resulted in consensus statements for standardization oral health PROMs and CROMs in individuals with OI. This outcome set can improve the standard of care by incorporating recommendations of professionals involved in dental care of individuals with OI. Further, it can facilitate research and international research co-operation. In addition, the significant contribution of the focus groups highlights the relevance of dental and oral health-related problems of individuals with OI.

Physiological and erosive wear reported in clinical studies were reviewed, and in vitro aging models were developed to simulate and compare the effect of aging on human teeth with the review data obtained from clinical studies.

A review of clinical studies and randomized clinical trials that quantify enamel wear was performed in the PubMed database. The first in vitro analysis evaluated the effect of mechanical chewing simulation only. Enamel specimens were aged in the chewing simulator (up to 1.2 million cycles) with two occlusal loads (30 and 50 N). In the second in vitro analysis, specimens were aged in two aging models. The first model (MT) simulated mechanical and thermal oral challenges: MT1- 240,000 chewing and 10,000 thermal cycles, MT2- 480,000 chewing and 20,000 thermal cycles, MT3- 1.2 million chewing and 50,000 thermal cycles. The second model (MTA) simulated mechanical, thermal, and acidic oral challenges as follows: MTA1- 240,000 chewing, 10,000 thermal and 3-h acidic cycles; MTA2: 480,000 chewing, 20,000 thermal and 6-h acidic cycles, MTA3- 1.2 million chewing, 50,000 thermal and 15-h acidic cycles.

The review included 13 clinical studies evaluating tooth wear (eight physiological and five erosive). The results estimated the annual average physiological wear as 38.4 µm (9.37-51). In comparison, the MT1 showed wear of 60 (24) µm. Also, the average annual erosive wear in the literature was 179.5 µm (70-265) compared to MTA1-induced wear of 209 (14) µm.

There was wide variation in tooth wear reported in clinical studies, suggesting a critical need for more accurate studies, possibly based on scanning technologies. Despite this, the data reported using the novel aging models are within a range to be considered consistent with and to simulate tooth wear measured in vivo.

Extrinsic factors for erosive tooth wear (ETW) have been widely reported, but the intrinsic factors for wear remain unclear.

The aim of this study was to evaluate the factors associated with the prevalence of ETW in patients with reflux oesophagitis (RO). To prevent severe ETW with RO, factors associated with severity of ETW were also evaluated.

A total of 270 patients with RO were recruited. A modified tooth wear index was used to evaluate the prevalence and severity of ETW. Salivary secretion and buffering capacity were assessed prior to endoscopy. Subjects were asked to complete a medical condition and oral self-care questionnaire. Univariate and multivariate analyses were employed to identify factors collectively associated with the prevalence and severity of ETW.

A total of 212 cases were categorized as patients with ETW (148 with mild ETW and 64 with severe ETW). Multivariate analyses indicated that saliva secretion, severity of RO and proton pump inhibitor (PPI) resistance were associated with the prevalence of ETW, whereas age, BMI and severity of RO were associated with the severity of ETW. The odds ratio of saliva secretion and BMI were less than 1, meaning that higher saliva secretion resulted in a lower prevalence of ETW and lower BMI was associated with severe ETW.

Saliva secretion, severity of RO and PPI resistance were associated with the prevalence of ETW, whereas age, BMI and severity of RO were associated with the severity of ETW. Lower saliva secretion and BMI were significant factors for ETW.

Oral status is an important indicator of past lifestyles. Determining the presence and extent of oral pathologies helps reconstruct average oral health, paramasticatory activities and diet of ancient and historical populations.

In this study, the dental remains from the early medieval cemetery of Früebergstrasse in Baar (Canton of Zug, Switzerland) and the high medieval Dalheim cemetery (North Rhine-Westphalia, Germany) were analyzed. Caries, periodontal condition, periapical lesions, antemortem tooth loss, and enamel hypoplasia were assessed in 654 teeth (993 observable loci) from 68 individuals (Baar: n = 36; Dalheim: n = 32).

The oral status of both populations was affected by age with higher values of tooth wear in advanced age individuals. High tooth wear values in both populations point towards the consumption of abrasive foods. Pronounced anterior tooth wear in Baar may also be due to non-masticatory tooth usage. Finally, possible nutritional deficiencies were hypothesized for the Baar population. A higher caries prevalence was observed in the Baar group, probably due to differences in carbohydrate intake. The oral conditions observed in the two studied populations exhibited several analogies, suggesting comparable lifestyles despite their separation in space and time. The only differences observed are related to the use of teeth as "tools" and are thus determined by behavioral choices rather than diverse socioeconomic factors.

Using multiple dental parameters to examine the oral health of premodern individuals can provide useful insights into the interactions between humans and their environment, from dietary patterns to paramasticatory activities.

Excessive gingival display (EGD) is a mucogingival deformity characterized by overexposure of the maxillary gingiva while smiling. This cross-sectional study aimed to identify EGD etiologies and their prevalence in participants at King Saud University, Saudi Arabia.

Adults with a gummy smile, who resided in Saudi Arabia, were nonsmokers, had good overall health, and had all their maxillary anterior teeth were eligible for inclusion. Participants were first screened by phone, and those who met the eligibility criteria were further screened at the Dental University Hospital (King Saud University, Riyadh, Saudi Arabia). The demographic characteristics of all eligible participants were recorded. Participants were further subjected to extraoral examination, which included gingival display (GD), vertical maxillary excess (VME), hypermobile upper lip (HUL), smile line, altered passive eruption (APE), gingival overgrowth, and short upper lip (SUL). Intraoral examination included periodontal pocket depth and bleeding upon probing. Student's t-test was used to compare the mean GD values across the main etiologies (VME, HUL, APE, and SUL).

All 123 participants (mean age: 23.1 ± 0.2 years; 74 females) had EGD (i.e., GD ≥ 4 mm), of whom 55 (44.7 %) had a single etiology, and the remaining 68 (55.3 %) had > 1 etiology. APE was the predominant etiology (n = 90, 73.2 %) in the study population. Of these (n = 90), APE alone was prevalent in 29 (32.2 %) participants, whereas the remaining patients had APE in combination with other EGD etiologies (n = 61; 67.8 %). The presence of more than one EGD etiology in the same participant was associated with greater GD. The VME and HUL were significantly associated with smile line classes (p < 0.05).

APE (alone or in combination) was the predominant etiology of EGD in the study population. The presence of multiple EGD etiologies in the same patient emphasizes the need for an etiology-based, sequential, and multiple-treatment strategy to effectively manage EGD.

 The aim of this study was to evaluate the clinical performance and possible complications of single zirconia crowns fabricated using an intraoral digital computer-aided design-computer-aided manufacturing (CAD-CAM) protocol in normal and dysfunctional patients after 3 years of follow-up.

 Seventy patients were included in this study. The teeth were prepared with a knife-edge marginal design, and temporary crowns were placed. Digital impressions were taken using optical scanning, and the frameworks were milled using the same technology. The veneering process was performed by the same dental technician. The occlusal corrections were made before cementation. The outcomes were evaluated in terms of survival, failures, and complications. The marginal adaptation of the crowns was also assessed.

 The digital protocol for single zirconia crowns resulted in satisfactory outcomes, with high rates of survival and minimal complications after 3 years of follow-up. The marginal adaptation of the crowns was excellent, with 93% of the restorations achieving the ideal marginal adaptation, while 7% had minor deviations. Parafunctions were found in 41.9% of the prosthetic rehabilitation, but no significant differences were observed between the normal and dysfunctional groups regarding the survival and complications of the crowns.

 The digital protocol for single zirconia crowns is a reliable and predictable treatment option, even for patients with parafunction, when proper occlusal corrections are performed before cementation. The use of intraoral digital CAD-CAM technologies with optical impressions can simplify procedures, reduce the workflow time, and minimize the variables linked to the human factor.

Noncarious cervical lesions (NCCLs) are multifactorial and can be caused by the anatomical structure of the teeth, erosion, abrasion and abnormal occlusion. The aim of this case-control study was to explore the risk factors for NCCLs.

Cone-beam computed tomography was used to determine whether a wedge-shaped defect existed at the cementoenamel junction. We compared 63 participants with NCCLs with 63 controls without NCCLs, matched for sex, age (±1 year) and toothbrushing-related factors (e.g., type of bristle and brushing patterns, frequency and strength). All participants were asked to complete a questionnaire about self-administered daily diet habits and health condition. Univariate and multivariate logistic regression analyses were conducted to determine the risk factors for NCCLs.

Significant variables in the univariate analysis (i.e., p < .2) included frequency of carbonated beverage consumption, sella-nasion-point B angle (SNB) and Frankfort-mandibular plane angle (FMA). Multivariate logistic regression demonstrated that the consumption frequency of carbonated beverages (odds ratio [OR] = 3.147; 95% confidence interval [CI], 1.039-9.532), FMA (OR = 1.100; 95% CI, 1.004-1.204) and SNB (OR = 0.896; 95% CI, 0.813-0.988) was independent influencing factors. The area under the receiver operating characteristic curve (AUC) value of regression Model 1 (established with the frequency of carbonated beverage consumption, FMA, SNB and sleep bruxism) was 0.700 (95% CI, 0.607-0.792; p < .001), and that of regression Model 2 (established using the frequency of carbonated beverage consumption, FMA and SNB) was 0.704 (95% CI, 0.612-0.796; p < .001).

The consumption frequency of carbonated beverages and FMA was risk factors for NCCLs; the higher the frequency of carbonated beverage consumption and FMA, the higher was the probability of NCCLs. SNB was a protective factor for NCCL occurrence; the larger the SNB, the lower was the probability of NCCL occurrence. These findings have further clarified the aetiology of NCCLs and provided clinicians with valuable insights into strategies for preventing the loss of dental tissue.

This study aimed to carry out a systematic review of observational studies searching the association between salivary factors (amount and quality of saliva) and noncarious cervical lesions (NCCL) in individuals with permanent dentition.

Cross-sectional, case-control, and cohort studies performed in humans with permanent dentition (population) and considering noncarious cervical lesions (outcome) in association with salivary characteristics (exposure) were included. PubMed, Web of Science, Cochrane, LILACS/BBO, Scopus, Embase, IBCT, NICE, OpenGrey, and Google Scholar were searched, with no language or date restrictions. Of 6561 potentially eligible studies, 142 were selected for full-text analysis. Three reviewers independently selected the studies, performed data extraction, and quality analysis through the Newcastle-Ottawa Scale.

Finally, ten references were included in the review, four case-control and six cross-sectional studies. Several salivary parameters were evaluated. Some parameters were considered associated with the presence of noncarious cervical lesions: salivary buffering capacity, salivary pH, citric acid, and calcium and potassium levels. The methodological quality varied across studies, with high heterogeneity among them.

Some associations between saliva and NCCL suggesting protective factors and others risk factors were found. However, the evidence is sparse and comes from a few studies with great heterogeneity. New scientific evidence, with standardized methods, should be encouraged. Understanding salivary parameters that influence the occurrence of NCCL is important to guide dentists in relation to etiological factors that could potentially be neglected. The results may help in the development of new and early diagnostic methods and treatments for noncarious cervical lesions.

This study aims to map evidence on the relationship between hard drug use and dental wear. The scoping review is guided by the question: What is the relationship between hard drug consumption and dental wear?

Adhering to PRISMA-ScR guidelines, searches were conducted across PubMed, Embase, and four databases in March 2024. Inclusion criteria included studies investigating the association between hard drug use and dental wear, regardless of publication date or language. Data were presented through narrative exposition, tables, and a conceptual framework.

Twenty-eight studies (four case-control, three cross-sectional, five case reports, and sixteen literature reviews) were included. Among case-control studies, 75% observed an association between drug use and dental erosion; however, no cross-sectional studies demonstrated this association. Despite questionable quality, reviews established connections between drug use and dental erosion. Studies aimed to elucidate potential causes for dental erosion.

Analysis suggests a potential link between hard drug use and dental wear, though indirect. Factors like bruxism and reduced salivary pH may contribute to dental wear among drug users. Further investigation through primary studies exploring this relationship is necessary.

Dentists should focus not only on clinical characteristics of dental wear but also on mediating factors such as bruxism and decreased salivary pH associated with drug use. This holistic approach allows for a deeper understanding of dental wear mechanisms, enabling targeted preventive and therapeutic interventions.

To analyze the overall frequency and inter-tooth patterns of caries in three populations from ancient cemeteries located along the western border of the Central Iranian Plateau as a means to explore whether the populations of Iran had greater access to fermentable sugars after the establishment of the great empires.

Dental collections from Kafarved-Varzaneh (Early Bronze Age, MNI=66), Estark-Joshaqan (Iron Age, MNI=57), Tappeh Poustchi (Timurid and Safavid Period, MNI=34), together with comparative data from NE Syria.

Frequencies of dental caries per tooth categories, location and size of carious lesions are analyzed using Smith's Mean Measure of Divergence, Correspondence Analysis, χ2 and Kruskal-Wallis tests.

There are minimal differences in overall frequencies of carious lesions at Iranian sites, regardless of the chronology, but notable differences at Syrian sites. The inter-tooth pattern at the Iron Age cemetery in Estark appears distinctly different than the other Iranian sites and the comparative samples from Syria.

Divergent subsistence strategies may be linked with different inter-tooth patterns since people buried at Estark were mobile herders, while the other cemeteries were used by settled farmers.

This comprehensive research on dental caries in three chronologically diverse populations in Iran sheds light on the association between dental caries and subsistence strategies, and introduces the Smith's Mean Measure of Divergence to explore inter-tooth carious patterns, which may prove useful to other researchers seeking to understand the relationships between subsistence, diet, and the presence of carious lesions.

The studied sample size is relatively small and therefore its temporal/regional distribution produces low-resolution results.

More systematic research on the patterns of dental caries is necessary to produce more fine-grained reconstructions of diet and subsistence in Iran and around the globe.

Dental wear arises from mechanical (attrition or abrasion) and chemical (erosion) factors. Despite its prevalence and clinical significance, accurately measuring and understanding its causes remain challenging in everyday practice. This one-year study with 39 participants involved comprehensive examinations and full-arch intraoral scans at the start and after 12 months. Volume loss exceeding 100 µ on each tooth's surfaces (buccal, lingual/palatine and incisal/occlusal) was measured by comparing three-dimensional scans from both time points. This study also assessed factors such as abrasion and erosion through clinical exams and questionnaires. There were no significant differences in dental wear in participants with sleep bruxism. However, noticeable wear occurred in the front teeth of those with waking bruxism and joint-related symptoms. Increased wear was associated with frequent consumption of acidic drinks, regular swimming, dry mouth, nocturnal drooling and heartburn, while no significant wear was found in patients with reflux. The used methodology proved effective in accurately assessing the progression of dental wear, which is important as many patients may initially be asymptomatic. The variability observed in dental wear patterns underscores the need to develop specific software applications that allow immediate and efficient comparison of wear areas based on extensive analysis of patient databases.

In the past two decades, changing trends in socioeconomic status, dietary habits, and individual lifestyles of individuals have led to the emergence of tooth wear as an oral health problem. The present study aimed to investigate the prevalence and the associated etiologies of tooth wear in a convenience sample of adult patients visiting outpatient clinics of the Faculty of Dentistry at Umm Al-Qura University. This cross-sectional study was conducted on adult patients (18-40 years old) visiting outpatient clinics of the Faculty of Dentistry, Umm Al-Qura University. Two trained examiners visually assessed patients' tooth wear using Smith and Knight's Tooth Wear Index (TWI). Following the clinical examination, patients completed a self-administered questionnaire detailing risk factors such as the frequency of intake of acidic food and medicines, general health, chewing habits, dietary factors, and oral health-associated preventive behaviors. The resulting collected data were tabulated and statistically analyzed using Statistical Product and Service Solutions (SPSS, version 21; IBM SPSS Statistics for Windows, Armonk, NY). The total prevalence of tooth wear was 74%, and the recorded mean wear score (TWI) was 0.380 ± 0.386; anterior teeth exhibited greater wear than posterior teeth. Numerous associations were recorded between tooth wear and the tested variables in demographics, habits, diet, and medications, but most of them were not statistically significant. When toothbrushing habits were explored, the only factors to played a significant role in abrading the tooth structure were the type of brush bristles used (P-value = 0.026) and the frequency of brush renewal (P = 0.043). Patients who frequently ate citrus fruits and other acidic foods recorded high wear scores (0.509 ± 0.311 and 0.508 ± 0.402, respectively), although the difference was not statistically significant. When chewing occurred on both sides of the mouth, less tooth wear was recorded than if chewing was on the right or left side only (0.371 ± 0.260, 0.422 ± 0.273, and 0.520 ± 0.419, respectively). The study data support an association between tooth wear and patient occupation, use of hard-bristled and new toothbrushes, eating of citrus and other acidic food, and chewing on one side, as all of these factors increased the risk of tooth wear.

This study endeavours to investigate the effect of printing orientation on the trueness of additively manufactured molar zirconia crowns. The areal surface roughness and the characteristics of the marginal regions of the crowns were also considered.

Twelve molar crowns were manufactured at 0°, 45°, and, 90° printing orientations in a Lithoz and AON zirconia printer, respectively. Twelve milled crowns were used as a comparison. Samples were scanned and analysed in metrology software to determine the trueness of the groups. Regions of interest were defined as the margins, intaglio surface and contact points. Areal surface roughness and print layer thickness were further analysed using a confocal laser scanning microscope.

The results indicate that there are clear differences between the investigated desktop (AON) and industrial (Lithoz) 3D printer. The 45° Lithoz group is the only sample group showing no significantly different results in trueness for all regions analysed compared to the milled group. Areal surface roughness analysis indicates that the print layers in the marginal regions are within clinically tolerable limits and surface characteristics.

The printing orientation for zirconia crowns is critical to trueness, and differences are evident between different AM apparatuses. Considerations for design and orientation between different apparatuses should therefore be considered when utilising direct additive manufacturing processes. The areal surface roughness of the marginal regions is within acceptable clinical limits for all manufacturing processes and print orientations considered.

The materials and apparatuses for additive manufacturing of zirconia crowns are now clinically acceptable from the perspective of the trueness of a final crown for critical functional surfaces and areal surface roughness of the marginal regions.

Aim of this prospective study was to assess full mouth rehabilitation of severe tooth wear patients using minimally invasive CAD/CAM resin-based composite (RBC) restorations and direct veneers by evaluating restoration survival up to 5.5-years.

Twenty-two patients with generalized severe tooth wear with functional and/or esthetic problems were included. Following minimally invasive preparation, CAD/CAM RBC restorations (LAVA Ultimate,3M) were adhesively luted, direct RBC veneers (Filtek Supreme XTE, 3M) were applied in the aesthetic region. Patients were recalled after 1m,1y,3y,5y and seen in between recalls by their general dentists or at the clinical study center if complaints occurred. Failures were categorized as F1 (severe deficiencies requiring replacement/extraction), F2 (localized deficiencies requiring re-cementation/repair) and F3 (small chippings requiring refurbishment/monitoring). Survival of indirect restorations was evaluated using lifetables and Kaplan-Meier-graphs, distinguishing between failure categories and tooth type (front teeth=FT, premolars=PM, molars=M). F1 + F2 and F1 + F2 + F3 failures were analyzed using Cox regression on the variables tooth type/ location, age, gender and VDO increase (p < 0.05).

568 indirect restorations and 200 direct veneers in 21 patients evaluated for up to 5.5-years. For indirect restorations, 96 failures were recorded (F1:6;F2:41;F3:49) and annual failure rates were 0.29%(FT), 1.56%(PM), 2.93%(M) for F1 +F2 and 0.53%(FT), 2.42%(PM), 6.11%(M) for F1 + F2 + F3. Reasons for failure were chipping fracture (48), adhesive fracture (32), complete debonding (7), caries (4), endodontic treatment (1) and reasons unknown (documentation general dentists, 4). Molar tooth type had a statistically significantly increased probability of failure compared with front teeth and premolars for F1 + F2 + F3 (p < 0.006). Direct veneer restorations showed 18 failures (F1:2;F2:9;F3:7).

Minimally invasive CAD/CAM RBC restorations combined with direct RBC veneers showed an acceptable clinical mid-term survival for restorative rehabilitation of severely worn dentitions.

Bernard Smith was one of the most significant specialists in restorative dentistry of his generation. He was an inspiring undergraduate and postgraduate teacher, a noted international lecturer and a house-builder. Bernard was president of the British Society for Restorative Dentistry and first chairman of the Association of Consultants and Specialists in Restorative Dentistry.

Tooth wear is a multifactorial condition that manifests through various signs and symptoms. These individual signs and symptoms were described in multiple studies, leading to the inclusion in TWES 2.0 (Tooth Wear Evaluation System 2.0) and the forthcoming DC-TW (Diagnostic Criteria for Tooth Wear). However, a study evaluating their reliability has yet to be conducted.

The aim of the study was to examine the reliability in the assessment of 6 signs of pathological tooth wear and 18 clinical signs and symptoms determining aetiology, all of which are included in the TWES 2.0/DC-TW.

48 dental students (operators) evaluated patient cases from a patient pool of 14 patients on dental casts and high-resolution intraoral photographs. The agreement between all operators for each sign and symptom was calculated based on ICC (Intraclass Correlation Coefficients). Additionally, the agreement of each operator's evaluation with a predefined sample solution was calculated based on Cohen's kappa.

Inter-user agreement ranged from near perfect (0.91) to poor (0.02) for the various pathology signs or aetiology symptoms of tooth wear (mean 0.32). The agreements of the operator's ratings compared to the sample solution resulted in Cohen's kappa from 0.18 to 1 (mean 0.59) for the pathology signs and ranged from 0.02 to 0.51 for the aetiology signs (mean 0.38).

The reliability of the signs and symptoms examined and the ability of individual investigators to correctly identify and assign signs and symptoms varied widely. The current assessment tools for the qualification of tooth wear need further refinement, and examiners need intensive training in tooth wear assessment.

To compare the clinical performance of a glass hybrid (GH) restorative and a nano-ceramic composite resin (CR) in the restoration of non-carious cervical lesions (NCCLs) of bruxist individuals in a 60-month randomized clinical trial.

Twenty-five bruxist candidates having NCCLs were recruited in this clinical study. The depth, height (cervico-incisal), width (mesio-distal), internal angles of the NCCLs, degree of tooth wear (TWI) and gingival index (GI) were measured. One hundred-and-forty-eight NCCLs were restored either with a GH restorative (Equia Forte Fil) or a CR (Ceram.X One Universal). Modified USPHS criteria was used to evaluate restorations after 1 week and 12, 24, 36 and 60 months. Pearson's Chi-Square, Fisher's Exact and Cochran Q tests were run for analysis. Survival rates of the restorations were compared with Kaplan-Meier analysis (p < 0.05).

After 60 months, 97 restorations in 15 patients were examined. The recall rate was 60.0%. Retention rates were 73.5% for CR and 66.7% for GH. A total of 29 restorations were lost (13CR (26.5%), 16GH (33.3%)). There was not a significant difference between tested restoratives in retention (p = 0.464), marginal adaptation (p = 0.856) and marginal discoloration (p = 0.273). There was no relationship between internal angle, depth, height or width and retention of the GH or CR restorations (p > 0.05). The increase in retention loss and marginal discoloration of both restorations over time were significant (p < 0.001). Sensitivity or secondary caries were not detected after 60 months.

GH and nano-ceramic CR showed similar clinical performances in NCCLs after 60 months in patients with bruxism.

After 60 months, CR and GH materials showed clinically acceptable performances in restoration of NCCLs in patients with bruxism.

The prevalence between erosive tooth wear (ETW) in association with reflux oesophagitis (RO) has been reported. However, the severity of both diseases and the relationship between ETW and non-erosive reflux disease (NERD) is unclear.

The prevalence and severity of ETW were investigated in RO, NERD and healthy controls.

135 patients with RO, 65 with NERD and 40 healthy controls were recruited for this case-control study. A modified tooth wear index was used to evaluate the prevalence and severity of ETW. Salivary secretion and buffer capacity were assessed prior to endoscopy. The prevalence and severity of ETW, saliva properties among each group were analysed using Pearson's chi-squared test.

A total of 135 cases (56.3%) were categorised as the patient with ETW (55 with mild RO, 49 with severe RO and 31 with NERD). There was a significant relationship between the prevalence of RO and ETW, while there was no significant correlation between the prevalence of NERD and ETW. There was a significant difference related to the severity between RO and ETW. For salivary secretion, there was a significant difference between with and without ETW in patients with mild RO, severe RO and NERD. There was a significant difference between with and without ETW for salivary buffer capacity in patients with mild and severe RO.

There was a significant association of the prevalence and severity between RO and ETW. Clinical signs such as ETW and salivary buffer capacity depended on the severity of RO.

Sleep-related rhythmic movement disorder is characterised by stereotyped and repetitive rhythmic movements involving large muscle groups during sleep with frequencies between 0.5 and 2 Hz. Most of the published studies on sleep-related rhythmic movement disorder have focussed on children. Therefore, we performed a systematic review on this topic focussing on the adult population. The review is followed by a case report. The review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2020 guidelines. A total of seven manuscripts (n = 32 individuals) were included in the review. The clinical manifestation of body or head rolling predominated in the majority of included cases (53.13% and 43.75%, respectively). In n = 11 (34.37%) cases, a combination of rhythmic movements was observed. The literature review also revealed a wide spectrum of co-morbidities: insomnia, restless leg syndrome, obstructive sleep apnea, ischaemic stroke, epilepsy, hypertension, alcohol and drug dependency, mild depression, and diabetes mellitus. The case report presented a 33-year-old female who was referred to the sleep laboratory due to a suspicion of sleep bruxism and obstructive sleep apnea. Although the patient was initially suspected of having obstructive sleep apnea and sleep bruxism, after conducting video-polysomnography she met the criteria for sleep-related rhythmic movement disorder as she presented body rolling, which were surprisingly most evident during the rapid eye movement sleep stage. In summary, the prevalence of sleep-related rhythmic movement disorder among adults has not been determined yet. The present review and case report is a good starting point for discussion regarding rhythmic movement disorder in adults and further research on this topic.

This cross-sectional study aimed to examine upper lip (UL) and smile characteristics and soft tissue excessive gingival display (EGD) etiologies (hypermobile upper lip [HUL], altered passive eruption [APE], and short upper lip [SUL]) in a nondental adult population and to analyze interracial (Black and White) and intersex differences.

Community participants, non-Hispanic Blacks (NHB) and non-Hispanic Whites (NHW), were recruited and examined for UL vertical dimensions at rest and maximum smile and for HUL, APE, and SUL. Associations between gingival display (GD) or EGD and UL anatomical characteristics, HUL, APE, and SUL were analyzed.

Participants included 66 NHB and 65 NHW adults. Ergotrid height (greater among NHW; p = 0.019) averaged 14.0 mm. Upper lip vermilion length (ULVL), total UL length, internal lip length, total UL length during smile, and UL mobility averaged 8.6, 22.5, 23.1, 16.6, and 5.9 mm, respectively (all significantly greater in NHB; p ≤ 0.012). SUL prevalence was 4.6%, found only among NHW. Lip length change from rest to smile (LLC) averaged 26.2% (significantly greater in females; p = 0.003). HUL prevalence was 10.7% (NHB 13.1%, NHW 3.5%; p = 0.024). NHB had significantly greater GD (p ≤ 0.017). EGD and APE prevalence (6.9% for both) showed significant interracial and intersex differences (p ≤ 0.014). Multivariate logistic regression analyses indicated that LLC and HUL were the most consistently significant EGD determinants.

UL anatomical and functional characteristics and soft tissue-related EGD etiologies exhibit significant interracial and intersex differences, with UL mobility/hypermobility being the most consistently significant determinant of GD.

The objective of this study was to evaluate the effects of parental anxiety, depression levels and psychiatric symptom profiles of parents on the occurrence of sleep bruxism in children.

This cross-sectional study was carried out with a sample of 94 children aged 6 to 12 years, divided into two groups: with sleep bruxism (bruxism group-BG) and without sleep bruxism (control group-CG). Beck Depression Inventory (BDI), Symptom Checklist (SCL-90-R), Symptom Checklist and Screen for Child Anxiety Related Emotional Disorders-Parent (SCARED-P) scale were used to assess anxiety and depression levels of parents. All questionnaires were filled out by parents of children. Intraoral and extraoral examinations were carried out of children in the clinic and sleep bruxism was determined. All stress conditions were investigated by logistic regression analysis. In the comparison of the qualitative data, chi-square and Fisher exact tests were used.

The data revealed that participants whose mothers had high anxiety and interpersonal sensitivity scores, and participants whose fathers had a medium level of obsessive-compulsive disorder were more likely to have an SB problem (p < 0.05). According to the results of BDI, the fathers' results between the BG and the CG were not statistically significant (p > 0.05). However, the mothers' results between the BG and the CG were statistically significant (p < 0.05) When all subscales of SCARED-P were evaluated, the separation anxiety disorder subscore was statistically significant in the bruxism group.

The psychological status of parents is a significant risk factor associated with SB development in school-age children.

Tooth wear is a multifactorial complex process related to the loss of dental tissue, due to chemical or mechanical processes, by abrasion, attrition, erosion. Restorative treatment represents an attempt to rebuild and recreate the lost structure.

This scoping review aims to investigate whether restorative treatment of worn dentition (either with direct or indirect adhesive composite adhesive procedures or with prosthetic techniques) can have an impact on the masticatory performance parameters.

A scoping review was conducted on multiple databases (Pubmed, Medline CENTRAL, ICTRP), following the PRISMA guidelines. Abstracts of research papers were screened for suitability, and full-text articles were obtained for those who satisfied the inclusion and exclusion criteria.

Only one article meet the inclusion criteria of the review. Restorative treatment of worn dentition although have a positive impact on the self-report ability to chew, has no effect on the masticatory performance test.

At the moment, not enough evidence to comment on the actual therapeutic role of restorative treatment on tooth wear is available. Clinicians, before taking any clinical decision, should carefully discuss with patients the needs and expectations of the treatment plan.

Dental erosion is a condition that results from exposure of the enamel and dentin to non-bacterial acids of extrinsic and intrinsic origin, causing mineral loss on the surface of the tooth. Occupational exposure to sulfuric acid fumes has been described in association with dental erosion in battery manufacturing industry workers. Hence, this study aimed to assess the dental erosion among battery factory workers in HBL Power Systems Ltd, Hyderabad.

The sample consisted of 90 battery factory workers (62 males and 28 females). Demographic data with regard to age, gender, and length of exposure were recorded. Clinical examination was done to assess dental erosion using the tooth wear index given by Smith and Knight. Data were statistically analyzed by using Fisher exact test. P <0.05 was considered statistically significant.

Among 90 workers examined, 43.3% showed prevalence of erosion with higher occurrence rate in females (54%) than males (38.7%). 66.6% of affected workers had erosion score of 1, and 33.4% showed erosion score of 2 and 3. We also observed statistically significant highest prevalence and increased severity of dental erosion in workers with prolonged duration of employment (>11 years).

The present study revealed increased prevalence of dental erosion among battery factory workers. Hence, it highlights the importance of protective measures with efficient surveillance and monitoring in the workplace environment.

Optical coherence tomography (OCT) is an optics-based imaging technique, which may be called an "optical biopsy." It can be used to acquire structural information about a tissue at a resolution comparable to histopathology. OCT is based on the principle of low-coherence interferometry where near-infrared (NIR) light is shown on a tissue sample and then cross-sectional images are obtained based on backscattered light and echo time delay. Two main types of OCT are characterized as time-domain OCT (TD-OCT) and Fourier-domain OCT (FD-OCT). The applications of OCT in dentistry can be broadly divided into two groups, i.e., assessment of pathologies and assessment of surfaces and interfaces. Lately, OCT has made its transition from experimental laboratories to mainstream clinical applications. Starting from the short-term training courses, clinicians working in specialities like oral pathology, oral medicine, and oral implantology may find it a useful tool for their practices. It is now clear that OCT will be considered a gold standard diagnostic tool for the detection and characterization of several conditions and lesions of the orofacial region. However, the next challenge will be to incorporate it into the undergraduate and postgraduate curriculum and train dental healthcare staff in the use of these devices.

Chronic fatigue root fracture describes a root fracture in a non-root canal treated (non-RCT) tooth. This study aimed to report the incidence and contributing factors of non-RCT teeth with chronic fatigue root fracture in a Taiwanese population.

This cross-sectional study included teeth extracted at Taipei Veterans General Hospital in Taiwan between 2018 and 2019. The reasons for extractions were recorded and included vertical and horizontal root fractures (VRF and HRF). Comparisons of clinical factors between teeth with fatigue VRF and teeth with fatigue HRF were performed by chi-square or Fisher exact test, where appropriate.

Of the 4207 extracted teeth examined, 263 (6.25%) had tooth fracture. Thirty-two non-RCT teeth had chronic fatigue root fracture, including 16 with VRF and 16 with HRF. The incidence was 0.76% (32/4207). The occurrence of chronic fatigue root fracture was higher in males (83.9%). The mean age of the 31 patients with chronic fatigue root fracture was 71.7 ± 13.1 years. More than half of these teeth had intact crowns with severe attrition. The fatigue VRF occurred more frequently in molars (P = 0.003), in roots with a long oval cross-section (P = 0.037), and in terminal teeth (P = 0.013) than the fatigue HRF.

The incidence of chronic fatigue root fracture is 0.76%. Both VRF and HRF occur mainly in aged males, in posterior teeth with attrition, and in teeth without restoration. Tooth position, cross-section root morphology, and terminal tooth are contributing factors related to chronic fatigue root fracture.

The etiology and diagnosis of noncarious cervical lesions (NCCLs) remain poorly understood.

The purpose of this clinical study was to examine NCCL progression in an existing group of participants, establish the incidence of new NCCLs in a 25-year follow-up study, and relate them to possible risk factors, including occlusal factors.

Thirty-three participants who had completed a questionnaire about their habits, diet, and personal information were evaluated in this observational retrospective study. Impressions were made, and casts from 3 time periods (Phase I in 1996, Phase II in 1999, and Phase III in 2021) were scanned to obtain digital casts. The casts were then evaluated in a 3-dimensional analysis software program (Geomagic Control; 3D Systems) to establish digital comparisons between NCCLs and occlusal wear. Furthermore, data from an occlusal analysis device (T-Scan; Tekscan) collected in Phase I was used to analyze occlusal interferences relating to the progression of NCCLs. The statistical analysis applied nonparametric tests, followed by the assessment of the association between NCCLs and risk factors, including occlusal wear, through binary logistic regression (α=.05).

At the end of Phase III, 7 new individuals with NCCLs were detected compared with Phase II. The median percentage progression of NCCLs per participant was 0.0% in Phase I, 7.1% in Phase II, and 35.7% in Phase III (P<.005). Occlusal wear in Phase I was associated with 5.02 times the occurrence of NCCLs in Phase III; occlusal wear in Phase II was associated with 4.73 times the occurrence of NCCLs in Phase III; and occlusal wear in Phase III was associated with 1.94 times the occurrence of NCCLs in Phase III (P<.001). Occlusal interference in border movements of the mandible was associated with a 3.55 times greater chance of presenting NCCLs in Phase III (P<.001). Additionally, statistically significant risk factors for the presence of NCCLs in Phase III were an acidic diet (P=.043) and alcohol consumption (P=.021).

The 25-year data showed an association between NCCLs and specific risk factors, including occlusal wear and occlusal interferences.

Dental pathology and tooth wear data can offer valuable insights into the diet and behaviour of past populations. This study aimed to investigate the presence of dietary continuity by examining different types of dental pathology and tooth wear in a medieval sample from the United Kingdom, comparing them to earlier and later samples from the same location.

A comprehensive examination was conducted on 41 individuals (comprising 914 permanent teeth) retrieved from the medieval cemetery of St. Owens Church in Southgate Street, Gloucester, UK. The research focused on documenting and analysing various types of dental pathology and tooth wear, such as dental caries, calculus, and tooth chipping. The frequency of these specific pathologies and wear patterns was then compared to existing literature. Additionally, non-masticatory tooth wear was also evaluated as part of the study.

The sample exhibits high levels of carious lesions and calculus (24 % and 74 % of teeth respectively). Anterior teeth also show an elevated chipping frequency, and along with occlusal notches on the maxillary central incisors suggest teeth were regularly used for non-masticatory purposes.

Caries frequency is similar to sites from later periods and may relate to the early adoption of consuming refined carbohydrates. However, remains from the same area, but the earlier Roman period, also shows high rates of caries and calculus, suggesting a continuation of consuming certain cariogenic foods, or certain behavioural/environmental factors, may instead be responsible for these pathology and wear patterns.

To explore the variability of tooth wear progression at the surface-, tooth- and patient-level over a period of three years three years using in vivo 3D-measurements of full dentitions amongst patients with moderate to severe tooth wear and without demand for restorative rehabilitation.

Fifty-five eligible patients with moderate to severe tooth wear had intra-oral scans taken using either the 3 M True Definition Intraoral Scanner or the 3 M Lava Chairside Oral Scanner. The maximum height loss (µm) per cusp/incisal/palatal surface at unrestored surfaces was measured using the 3D Wear Analysis (3DWA)-protocol with Geomagic Qualify, resulting in sixty-four measurements per dentition. Data was visualized using box plots. Correlation was calculated between tooth wear progression rates of different tooth types and surfaces.

Thirty patients with scans at intake and after three years were included (38 ± 8 years, 77% M, 23% F). Mean observation time was 3.1 ± 0.2 years. Surface measurements (N = 1,615) showed a high deviation and a high number of outliers at all surfaces, indicating large variability amongst the surfaces, tooth types and patients with tooth wear progression rates. Correlations between regions were very low: anterior-molar region -0.219, anterior-premolar region 0.116 and premolar-molar region 0.113. Correlations between the surfaces of molars were also low (between 0.190 and 0.565).

In a group of patients with moderate to severe tooth wear, large differences in wear progression were found within and amongst patients. Tooth wear progression is therefore highly individualized and can be very localized.

This study confirms the necessity of individual management of patients with moderate to severe tooth wear. Effective monitoring of tooth wear is important when deciding the timing and need for restorative intervention.

NCT04790110.

(1) Objective: This scoping review evaluates composite restorations as a treatment modality for anterior tooth surface loss and investigates the longevity of the direct and indirect composites used herein. (2) Method: The search encompassed Medline, Embase, Web of Science, the Cochrane Library, and hand search utilizing the PICO framework. (3) Results: Eight studies were included in this review, comprising one randomized controlled trial, one retrospective, and six prospective studies. Some studies reported favorable outcomes for composite restorations in anterior teeth. Although not statistically significant, evidence supported the anterior composite as a viable short- to medium-term solution for managing tooth wear. Direct resin composites were deemed clinically and cost-effective when managing localized anterior tooth wear. However, limitations and inconsistencies in this scoping review limited definitive clinical recommendations. (4) Conclusions: Further research, including well-managed randomized controlled trials using standardized protocols and longer follow-up periods, is essential to reconfirm the long-term efficacies of anterior composite restorations when managing tooth wear. A robust research design and exacting protocols could facilitate more meaningful clinical conclusions.

Tooth wear (TW) prevalence is high and increasing and has important consequences on the patient's quality of life. Knowledge of risk factors is crucial to promote diagnosis, prevention strategies and timely interceptive treatment. Many studies have identified TW risk factors.

This scoping review aims to map and describe suspected available factors associated with TW in permanent dentition based on quantitative measurement.

The scoping review was conducted using the PRISMA extension of the Scoping Reviews checklist. The search was conducted in October 2022 from the Medline® (PubMed® interface) and Scopus® databases. Two independent reviewers selected and characterised the studies.

2702 articles were identified for assessment of titles and abstracts, and 273 articles were included in the review. The results show a need to standardise TW measurement indices and the study design. The included studies highlighted various factors, classified into nine domains: sociodemographic factors, medical history, drinking habits, eating habits, oral hygiene habits, dental factors, bruxism and temporomandibular disorders, behavioural factors, and stress. Results related to chemical TW (erosion) risk factors underline the importance of eating disorders, gastroesophageal reflux and lifestyle, particularly drinking and eating behaviours, which supports developing public health information campaigns and interventions. Besides chemical, this review identifies evidence of several mechanical TW risk factors, such as toothbrushing and bruxism; the influence of this last factor needs to be further explored.

TW management and prevention require a multidisciplinary approach. Dentists are in the first line to detect associated diseases such as reflux or eating disorders. Consequently, practitioners' information and guideline diffusion should be promoted, and a TW risk factors checklist (the ToWeR checklist) is proposed to help diagnostic approaches.