Academic Content and Language Evaluation of This Article
Citation of this article
Corresponding Author of This Article
Research Domain of This Article
Article-Type of This Article
Open-Access Policy of This Article
Times Cited Counts in Google of This Article
Number of Hits and Downloads for This Article
- Total Article Views (27323)
All Articles published online
|
Publishing Process of This Article
|
Jan 16, 2015 (publication date) through Nov 22, 2024
Times Cited of This Article
Journal Information of This Article
Publication Name
World Journal of Clinical Cases
ISSN
2307-8960
Publisher of This Article
Baishideng Publishing Group Inc, 7041 Koll Center Parkway, Suite 160, Pleasanton, CA 94566, USA
| For: | Saini M, Singh Y, Arora P, Arora V, Jain K. Implant biomaterials: A comprehensive review. World J Clin Cases 2015; 3(1): 52-57 [PMID: 25610850 DOI: 10.12998/wjcc.v3.i1.52] |
|---|---|
| URL: | https://www.wjgnet.com/2307-8960/full/v3/i1/52.htm |
| Number | Citing Articles |
| 1 |
Jianbo Jin, Huan Yang, Yujing Liu, Junjie Yang, Kunmao Li, Yanliang Yi, Dongchu Chen, Wencai Zhang, Shengfeng Zhou. Microstructure and enhanced strength-ductility of TiNbCu alloys produced by laser powder bed fusion. Materials Science and Engineering: A 2024; 890: 145889 doi: 10.1016/j.msea.2023.145889
|
| 2 |
Christian C. Schreib, Maria I. Jarvis, Tanguy Terlier, Jacob Goell, Sudip Mukherjee, Michael D. Doerfert, Taylor Anne Wilson, Michael Beauregard, Kevin N. Martins, Jared Lee, Leonardo D. Sanchez Solis, Esperanza Vazquez, Matthias A. Oberli, Brian W. Hanak, Michael Diehl, Isaac Hilton, Omid Veiseh. Lipid Deposition Profiles Influence Foreign Body Responses. Advanced Materials 2023; 35(21) doi: 10.1002/adma.202205709
|
| 3 |
Abhishek Barwar, Prateek Kala, Rupinder Singh. 3D-printed conformal sensors for health monitoring of bovine post diaphragmatic hernia surgery: a review. Rapid Prototyping Journal 2024; 30(5): 904 doi: 10.1108/RPJ-09-2023-0332
|
| 4 |
Rajesh Lakshmanan, Nilanjana Maulik. Development of next generation cardiovascular therapeutics through bio‐assisted nanotechnology. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2018; 106(5): 2072 doi: 10.1002/jbm.b.34000
|
| 5 |
Tanushree Sarkar, Harit Jha. Industrial Microbiology and Biotechnology. 2024; : 387 doi: 10.1007/978-981-97-1912-9_16
|
| 6 |
Karina M Zaniolo, Sonia R Biaggio, Joni A Cirelli, Mariana A Cominotte, Nerilso Bocchi, Romeu C Rocha-Filho. Physical characterization and biological tests of bioactive titanium surfaces prepared by short-time micro-arc oxidation in green electrolyte. Materials Research Express 2022; 9(2): 025401 doi: 10.1088/2053-1591/ac4d53
|
| 7 |
Yue‐Houng Hu, Wan Chan Tseung Hok Seum, Ashley Hunzeker, Olivia Muller, Robert L. Foote, Daniel W. Mundy. The effect of common dental fixtures on treatment planning and delivery for head and neck intensity modulated proton therapy. Journal of Applied Clinical Medical Physics 2023; 24(7) doi: 10.1002/acm2.13973
|
| 8 |
Shubhra Dixit, Surbhi Gupta, Ajay Sharma. Additive Manufacturing for Biomedical Applications. Biomedical Materials for Multi-functional Applications 2024; : 195 doi: 10.1007/978-981-97-5456-4_10
|
| 9 |
Okan Icten, Narayan Sadashiv Hosmane, Dursun Ali Kose, Birgul Zumreoglu‐Karan. Production of Magnetic Nano‐bioconjugates via Ball Milling of Commercial Boron Powder with Biomolecules. Zeitschrift für anorganische und allgemeine Chemie 2016; 642(14): 828 doi: 10.1002/zaac.201600181
|
| 10 |
Mohammad Shahin, Khurram Munir, Cuie Wen, Yuncang Li. Magnesium matrix nanocomposites for orthopedic applications: A review from mechanical, corrosion, and biological perspectives. Acta Biomaterialia 2019; 96: 1 doi: 10.1016/j.actbio.2019.06.007
|
| 11 |
G. G. Kazarian, S. Y. Ivanov, V. V. Bekreev, A. B. Dymnikov, K. M. Salekh, E. D. Jumaniyazova. Evolution of surgical methods for restoring missing teeth. Medical alphabet 2024; (1): 68 doi: 10.33667/2078-5631-2024-1-68-75
|
| 12 |
Crystal Kayaro Emonde, Max-Enno Eggers, Marcel Wichmann, Christof Hurschler, Max Ettinger, Berend Denkena. Radiopacity Enhancements in Polymeric Implant Biomaterials: A Comprehensive Literature Review. ACS Biomaterials Science & Engineering 2024; 10(3): 1323 doi: 10.1021/acsbiomaterials.3c01667
|
| 13 |
Merve İzmir, Batur Ercan. Fabrication of micropit structures on Ti6Al4V alloy using fluoride-free anodization for orthopedic applications. Journal of Materials Research 2019; 34(07): 1084 doi: 10.1557/jmr.2019.56
|
| 14 |
Shubhmita Bhatnagar, Pradeeptha Reddy Gadeela, Pranathi Thathireddy, Venkata Vamsi Krishna Venuganti. Microneedle-based drug delivery: materials of construction. Journal of Chemical Sciences 2019; 131(9) doi: 10.1007/s12039-019-1666-x
|
| 15 |
Yuri Yasenchuk, Ekaterina Marchenko, Victor Gunther, Andrey Radkevich, Oleg Kokorev, Sergey Gunther, Gulsharat Baigonakova, Valentina Hodorenko, Timofey Chekalkin, Ji-hoon Kang, Sabine Weiss, Aleksei Obrosov. Biocompatibility and Clinical Application of Porous TiNi Alloys Made by Self-Propagating High-Temperature Synthesis (SHS). Materials 2019; 12(15): 2405 doi: 10.3390/ma12152405
|
| 16 |
Karsten Glowka, Maciej Zubko, Paweł Świec, Krystian Prusik, Magdalena Szklarska, Dariusz Chrobak, János L. Lábár, Danuta Stróż. Influence of Molybdenum on the Microstructure, Mechanical Properties and Corrosion Resistance of Ti20Ta20Nb20(ZrHf)20−xMox (Where: x = 0, 5, 10, 15, 20) High Entropy Alloys. Materials 2022; 15(1): 393 doi: 10.3390/ma15010393
|
| 17 |
Kalluri Lakshmi Mounika, Rama Brahmam Lanke, Manasi Chinnadurai Mudaliyar, Sourabh Khandelwal, Bhavyasri Gaddam, Ramanarayana Boyapati. Comprehensive Evaluation of Novel Biomaterials for Dental Implant Surfaces: An In Vitro Comparative Study. Cureus 2024; doi: 10.7759/cureus.61175
|
| 18 |
Daniel Martinez-Marquez, Ali Mirnajafizadeh, Christopher P. Carty, Rodney A. Stewart, Fabrizio Gelain. Application of quality by design for 3D printed bone prostheses and scaffolds. PLOS ONE 2018; 13(4): e0195291 doi: 10.1371/journal.pone.0195291
|
| 19 |
Vineet Kumar, Ahmad Reshad Bakhtari, Payal Himanshu, Waseem Akhtar. Advances in Engineering Design. Lecture Notes in Mechanical Engineering 2021; : 507 doi: 10.1007/978-981-33-4684-0_52
|
| 20 |
J. Venezuela, M.S. Dargusch. The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: A comprehensive review. Acta Biomaterialia 2019; 87: 1 doi: 10.1016/j.actbio.2019.01.035
|
| 21 |
M. S. Gaafar, S. M. Yakout, Y. F. Barakat, W. Sharmoukh. Electrophoretic deposition of hydroxyapatite/chitosan nanocomposites: the effect of dispersing agents on the coating properties. RSC Advances 2022; 12(42): 27564 doi: 10.1039/D2RA03622C
|
| 22 |
Paulina Wiśniewska, Mohammad Reza Saeb, Sidi A. Bencherif. Biomaterials recycling: a promising pathway to sustainability. Frontiers in Biomaterials Science 2023; 2 doi: 10.3389/fbiom.2023.1260402
|
| 23 |
Thomas Malachowski, Austin Hassel. Engineering nanoparticles to overcome immunological barriers for enhanced drug delivery. Engineered Regeneration 2020; 1: 35 doi: 10.1016/j.engreg.2020.06.001
|
| 24 |
Masahiro Okada, Emilio Satoshi Hara, Atsushi Yabe, Kei Okada, Yo Shibata, Yasuhiro Torii, Takayoshi Nakano, Takuya Matsumoto. Titanium as an Instant Adhesive for Biological Soft Tissue. Advanced Materials Interfaces 2020; 7(9) doi: 10.1002/admi.201902089
|
| 25 |
Junlei Li, Ling Qin, Ke Yang, Zhijie Ma, Yongxuan Wang, Liangliang Cheng, Dewei Zhao. Materials evolution of bone plates for internal fixation of bone fractures: A review. Journal of Materials Science & Technology 2020; 36: 190 doi: 10.1016/j.jmst.2019.07.024
|
| 26 |
Azzam Ahmed, Xianghui Wang, Ming Yang. Biocompatible materials of pulsatile and rotary blood pumps: A brief review. REVIEWS ON ADVANCED MATERIALS SCIENCE 2020; 59(1): 322 doi: 10.1515/rams-2020-0009
|
| 27 |
Daniel Martinez-Marquez, Karan Gulati, Christopher P. Carty, Rodney A. Stewart, Sašo Ivanovski. Determining the relative importance of titania nanotubes characteristics on bone implant surface performance: A quality by design study with a fuzzy approach. Materials Science and Engineering: C 2020; 114: 110995 doi: 10.1016/j.msec.2020.110995
|
| 28 |
Sadaqat Ali, Ahmad Majdi Abdul Rani, Riaz Ahmad Mufti, Syed Waqar Ahmed, Zeeshan Baig, Sri Hastuty, Muhammad Al’Hapis Abdul Razak, Abdul Azeez Abdu Aliyu. Optimization of Sintering Parameters of 316L Stainless Steel for In-Situ Nitrogen Absorption and Surface Nitriding Using Response Surface Methodology. Processes 2020; 8(3): 297 doi: 10.3390/pr8030297
|
| 29 |
J. Yirijor, Y. Danyuo, A. A. Salifu, T. Ezenwafor, F. McBagonluri. Surface coating and wettability study of PDMS-based composites: Effect on contact angle and cell-surface interaction. MRS Advances 2022; 7(30): 656 doi: 10.1557/s43580-022-00299-y
|
| 30 |
Michaël W. Kulka, Sarah Smatty, Felix Hehnen, Tim Bierewirtz, Kim Silberreis, Chuanxiong Nie, Yannic Kerkhoff, Carsten Grötzinger, Sebastian Friedrich, Lars Ingemar Dahms, Jens Dernedde, Ingo Grunwald, Michael Schirner, Ulrich Kertzscher, Klaus Affeld, Rainer Haag. The Application of Dual‐Layer, Mussel‐Inspired, Antifouling Polyglycerol‐Based Coatings in Ventricular Assist Devices. Advanced Materials Interfaces 2020; 7(21) doi: 10.1002/admi.202000272
|
| 31 |
Jyotsna Dutta Majumdar, Arun Kumar, Sisa Pityana, I. Manna. Laser Surface Melting of AISI 316L Stainless Steel for Bio-implant Application. Proceedings of the National Academy of Sciences, India Section A: Physical Sciences 2018; 88(3): 387 doi: 10.1007/s40010-018-0524-4
|
| 32 |
Lily J. Suh, Imran Khan, Christine Kelley-Patteson, Ganesh Mohan, Aladdin H. Hassanein, Mithun Sinha, Martin Holland. Breast Implant-Associated Immunological Disorders. Journal of Immunology Research 2022; 2022: 1 doi: 10.1155/2022/8536149
|
| 33 |
Thamizharasan Sampath, Sandhiya Thamizharasan, Monisha Saravanan, Prakash Srinivasan Timiri Shanmugam. Trends in Development of Medical Devices. 2020; : 77 doi: 10.1016/B978-0-12-820960-8.00006-X
|
| 34 |
Victor Geanta, Ionelia Voiculescu, Petrica Vizureanu, Andrei Victor Sandu. Engineering Steels and High Entropy-Alloys. 2020; doi: 10.5772/intechopen.89318
|
| 35 |
María Cristina Garcia-Mendez, Victor Hugo Urrutia-Baca, Carlos A. Cuao-Moreu, Ernesto Lorenzo-Bonet, Melvyn Alvarez-Vera, David Mizael Ortiz-Martinez, Myriam Angelica de la Garza-Ramos. In Vitro Biocompatibility Evaluation of a New Co-Cr-B Alloy with Potential Biomedical Application. Metals 2021; 11(8): 1267 doi: 10.3390/met11081267
|
| 36 |
Yurii Sharkeev, Anna Eroshenko, Elena Legostaeva, Zhanna Kovalevskaya, Olga Belyavskaya, Margarita Khimich, Matthias Epple, Oleg Prymak, Viktoriya Sokolova, Qifang Zhu, Zeming Sun, Hongju Zhang. Development of Ultrafine–Grained and Nanostructured Bioinert Alloys Based on Titanium, Zirconium and Niobium and Their Microstructure, Mechanical and Biological Properties. Metals 2022; 12(7): 1136 doi: 10.3390/met12071136
|
| 37 |
Kwesi G. Dawson-Amoah, Bradford S. Waddell, Rohan Prakash, Michael M. Alexiades. Adverse Reaction to Zirconia in a Modern Total Hip Arthroplasty with Ceramic Head. Arthroplasty Today 2020; 6(3): 612 doi: 10.1016/j.artd.2020.03.009
|
| 38 |
Zach Gouveia, Hiran Perinpanayagam, Jesse Zhu. Development of multifunctional Si-Ca-PEG-nAg sol–gel implant coatings from calcium-2-ethoxyethoxide. Journal of Coatings Technology and Research 2021; 18(4): 1177 doi: 10.1007/s11998-021-00477-x
|
| 39 |
Michał Ciszyński, Bartosz Chwaliszewski, Wojciech Simka, Marzena Dominiak, Tomasz Gedrange, Jakub Hadzik. Zirconia Dental Implant Designs and Surface Modifications: A Narrative Review. Materials 2024; 17(17): 4202 doi: 10.3390/ma17174202
|
| 40 |
Vaishnavi Rajaraman, Deepak Nallaswamy, Dhanraj M. Ganapathy, Saloni Kachhara. Osseointegration of Hafnium when Compared to Titanium - A Structured Review. The Open Dentistry Journal 2021; 15(1): 137 doi: 10.2174/1874210602115010137
|
| 41 |
Katja Andrina Kravanja, Luka Suhadolnik, Marjan Bele, Uroš Maver, Jan Rožanc, Željko Knez, Maša Knez Marevci, Matjaž Finšgar. The synthesis, surface analysis, and cellular response of titania and titanium oxynitride nanotube arrays prepared on TiAl6V4 for potential biomedical applications. Journal of Materials Research and Technology 2023; 24: 4074 doi: 10.1016/j.jmrt.2023.04.021
|
| 42 |
Nuno Cruz, Maria Inês Martins, José Domingos Santos, Javier Gil Mur, João Paulo Tondela. Surface Comparison of Three Different Commercial Custom-Made Titanium Meshes Produced by SLM for Dental Applications. Materials 2020; 13(9): 2177 doi: 10.3390/ma13092177
|
| 43 |
Santhosh Suresh, Chen-Nan Sun, Sravya Tekumalla, Vinicius Rosa, Sharon Mui Ling Nai, Raymond Chung Wen Wong. Mechanical properties and in vitro cytocompatibility of dense and porous Ti–6Al–4V ELI manufactured by selective laser melting technology for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials 2021; 123: 104712 doi: 10.1016/j.jmbbm.2021.104712
|
| 44 |
Frank Sebastian Fröschen, Dieter Christian Wirtz, Frank Alexander Schildberg. Physiologische Reaktionen im Interface zementfreier Implantate. Die Orthopädie 2023; 52(3): 178 doi: 10.1007/s00132-023-04347-9
|
| 45 |
Aline Raquel Vieira Nunes, Sinara Borborema Gabriel, Carlos Angelo Nunes, Leonardo Sales Araújo, Renato Baldan, Paulo Mei, Loïc Malet, Jean Dille, Luiz Henrique de Almeida. Microstructure and Mechanical Properties of Ti-12Mo-8Nb Alloy Hot Swaged and Treated for Orthopedic Applications. Materials Research 2017; 20(suppl 2): 526 doi: 10.1590/1980-5373-mr-2017-0637
|
| 46 |
Raluca Negrea, Cristina Busuioc, Izabela Constantinoiu, Dana Miu, Cornelia Enache, Florin Iordache, Sorin-Ion Jinga. Akermanite-based coatings grown by pulsed laser deposition for metallic implants employed in orthopaedics. Surface and Coatings Technology 2019; 357: 1015 doi: 10.1016/j.surfcoat.2018.11.008
|
| 47 |
Amritbir Singh, Parminder Singh, B. S. Pabla, Harpreet Singh, S. Shiva. Parametric analysis to explore the viability of cold spray additive manufacturing to print SS316L parts for biomedical application. Journal of the Brazilian Society of Mechanical Sciences and Engineering 2022; 44(8) doi: 10.1007/s40430-022-03666-w
|
| 48 |
Udesh Dhawan, Hsu-An Pan, Ying Hao Chu, Guewha S. Huang, Po Chun Chen, Wen-Liang Chen. Temporal Control of Osteoblast Cell Growth and Behavior Dictated by Nanotopography and Shear Stress. IEEE Transactions on NanoBioscience 2016; 15(7): 704 doi: 10.1109/TNB.2016.2605686
|
| 49 |
Elham Torof, Hana Morrissey, Patrick A. Ball. Antibiotic Use in Dental Implant Procedures: A Systematic Review and Meta-Analysis. Medicina 2023; 59(4): 713 doi: 10.3390/medicina59040713
|
| 50 |
Omri Maayan, Karim Shafi, Sheeraz Qureshi. Update on design and biomechanics of cervical disc arthroplasty. Seminars in Spine Surgery 2023; 35(1): 101009 doi: 10.1016/j.semss.2023.101009
|
| 51 |
Aditya Alagatu, Darshan Dhapade, Mayuresh Gajbhiye, Ritik Panjrekar, Ashish Raut, Nilesh Awate, Praneeta Priya. Detailed study on basic methodology of dental implant and surface modification techniques. IOP Conference Series: Materials Science and Engineering 2022; 1259(1): 012046 doi: 10.1088/1757-899X/1259/1/012046
|
| 52 |
Simona Popescu Dobrită, Sergiu Stanciu, Ramona Cimpoesu, Bogdan Istrate, Nicanor Cimpoesu, Vasile Manole, Iulian Ionită. Electrochemical characterization of ZnMg-Ca biodegradable alloy. Materials Today: Proceedings 2019; 19: 1026 doi: 10.1016/j.matpr.2019.08.017
|
| 53 |
ZhongYi Wang, QianRong Xiang, Xin Tan, YaDong Zhang, HaoQi Zhu, Jian Pu, JiKui Sun, ManLin Sun, YingKai Wang, Qiang Wei, HaiYang Yu. Functionalized Cortical Bone‐Inspired Composites Adapt to the Mechanical and Biological Properties of the Edentulous Area to Resist Fretting Wear. Advanced Science 2023; 10(11) doi: 10.1002/advs.202207255
|
| 54 |
V A Mikushina, I Yu Smolin, Yu N Sidorenko. Numerical modeling and prediction of mechanical properties of ceramic composite. Journal of Physics: Conference Series 2017; 919: 012013 doi: 10.1088/1742-6596/919/1/012013
|
| 55 |
Chang Liu, Tadaaki Hoshi, Jiayi Shen, Atsushi Shinoda, Hisashi Kino, Tetsu Tanaka, Takafumi Fukushima. Bendability enhancement of 3D interconnections with out-of-plane corrugation for flexible hybrid electronics. Japanese Journal of Applied Physics 2024; 63(4): 04SP74 doi: 10.35848/1347-4065/ad375f
|
| 56 |
Karoline E. Eckhart, Brian D. Holt, Michaela G. Laurencin, Stefanie A. Sydlik. Covalent conjugation of bioactive peptides to graphene oxide for biomedical applications. Biomaterials Science 2019; 7(9): 3876 doi: 10.1039/C9BM00867E
|
| 57 |
Ahmed Al-Noaman, Simon C.F. Rawlinson, Robert G. Hill. MgF2- containing glasses as a coating for titanium dental implant. I- Glass powder. Journal of the Mechanical Behavior of Biomedical Materials 2022; 125: 104948 doi: 10.1016/j.jmbbm.2021.104948
|
| 58 |
Ian Kimber, David A. Basketter. Allergic Sensitization to Nickel and Implanted Metal Devices: A Perspective. Dermatitis 2022; 33(6): 396 doi: 10.1097/DER.0000000000000819
|
| 59 |
Héctor Guerra-Yánez, Néstor Rubén Florido-Suárez, Ionelia Voiculescu, Julia Claudia Mirza-Rosca. Corrosion behavior of new titanium alloys for medical applications. Materials Today: Proceedings 2023; 72: 533 doi: 10.1016/j.matpr.2022.08.112
|
| 60 |
Dhivyaa Anandan, Amit Kumar, Amit Kumar Jaiswal. Comparative study of hydroxyapatite synthesized using Schiff base and wet chemical precipitation methods. Journal of the Mechanical Behavior of Biomedical Materials 2023; 148: 106200 doi: 10.1016/j.jmbbm.2023.106200
|
| 61 |
Chiquita Prahasanti, Darmawan Setijanto, Diah Savitri Ernawati, Rini Devijanti Ridwan, David Buntoro, Kamadjaja Kamadjaja, Anita Yuliati, Asti Meizarini, Nike Hendrijantini, Agung Krismariono, Shafira Kurnia Supandi, Tania Saskianti, Ratri Maya Sitalaksmi, Djoko Kuswanto, Tansza Setiana Putri, Nastiti Faradilla Ramadhani, Muhammad Dimas Adiya Ari, Alexander Patera Nugraha. Utilization of Polymethyl Methacrylate and Hydroxyapatite Composite as Biomaterial Candidate for Porous Trabecular Dental Implant Fixture Development: A Narrative Review. Research Journal of Pharmacy and Technology 2022; : 1863 doi: 10.52711/0974-360X.2022.00312
|
| 62 |
S. Kedia, A. Das, B. S. Patro, J. P. Nilaya. Potential tribological and antibacterial benefits of pulsed laser-deposited zirconia thin film on Ti6Al4V bio-alloy. Applied Physics A 2022; 128(8) doi: 10.1007/s00339-022-05835-z
|
| 63 |
Jakub Kowalski, Adam K. Puszkarz, Mateusz Radwanski, Jerzy Sokolowski, Michal Cichomski, Rim Bourgi, Louis Hardan, Salvatore Sauro, Monika Lukomska-Szymanska. Micro-CT Evaluation of Microgaps at Implant-Abutment Connection. Materials 2023; 16(12): 4491 doi: 10.3390/ma16124491
|
| 64 |
S. Prokoshkin, Y. Pustov, Y. Zhukova, P. Kadirov, S. Dubinskiy, V. Sheremetyev, M. Karavaeva. Effect of Thermomechanical Treatment on Functional Properties of Biodegradable Fe-30Mn-5Si Shape Memory Alloy. Metallurgical and Materials Transactions A 2021; 52(5): 2024 doi: 10.1007/s11661-021-06217-5
|
| 65 |
C. C. Wachesk, V. J. Trava-Airoldi, N. S. Da-Silva, A. O. Lobo, F. R. Marciano. The Influence of Titanium Dioxide on Diamond-Like Carbon Biocompatibility for Dental Applications. Journal of Nanomaterials 2016; 2016: 1 doi: 10.1155/2016/8194516
|
| 66 |
Y.H. Tang, H.P. Zhang. Theoretical understanding of bio-interfaces/bio-surfaces by simulation: A mini review. Biosurface and Biotribology 2016; 2(4): 151 doi: 10.1016/j.bsbt.2016.11.003
|
| 67 |
Manar E Al-Samaray, Abdalbseet A Fatalla. Fabrication and characterization of bioactive composite: A pilot study. Journal of Composite Materials 2023; 57(18): 2955 doi: 10.1177/00219983231179435
|
| 68 |
S. Gurel, A. Nazarahari, D. Canadinc, H. Cabuk, B. Bal. Assessment of biocompatibility of novel TiTaHf-based high entropy alloys for utility in orthopedic implants. Materials Chemistry and Physics 2021; 266: 124573 doi: 10.1016/j.matchemphys.2021.124573
|
| 69 |
A J Salman. Synthesis and characterization of porous zirconia parts by nonaqueous electrophoretic deposition technique. IOP Conference Series: Materials Science and Engineering 2020; 881(1): 012088 doi: 10.1088/1757-899X/881/1/012088
|
| 70 |
Zhe Li, Yide He, Lasse Hyldgaard Klausen, Ning Yan, Jing Liu, Fanghao Chen, Wen Song, Mingdong Dong, Yumei Zhang. Growing vertical aligned mesoporous silica thin film on nanoporous substrate for enhanced degradation, drug delivery and bioactivity. Bioactive Materials 2021; 6(5): 1452 doi: 10.1016/j.bioactmat.2020.10.026
|
| 71 |
Haruyuki Aoyagi, Masahiro Okada, Hiroaki Yanagimoto, Takuya Matsumoto. Investigation on bacterial capture and antibacterial properties of acid-treated Ti surface. Dental Materials 2024; 40(2): 318 doi: 10.1016/j.dental.2023.11.018
|
| 72 |
Madhuri Pradhan, Suchismita Satapathy, B. B. Nayak. Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement. 2021; : 531 doi: 10.4018/978-1-7998-8050-9.ch028
|
| 73 |
Piotr Kosior, Piotr Kuropka, Maciej Janeczek, Marcin Mikulewicz, Wojciech Zakrzewski, Maciej Dobrzyński. The Influence of Various Preparation Parameters on the Histological Image of Bone Tissue during Implant Bed Preparation—An In Vitro Study. Applied Sciences 2021; 11(4): 1916 doi: 10.3390/app11041916
|
| 74 |
Mahmoud Elsayed, Mootaz Ghazy, Yehia Youssef, Khamis Essa. Optimization of SLM process parameters for Ti6Al4V medical implants. Rapid Prototyping Journal 2019; 25(3): 433 doi: 10.1108/RPJ-05-2018-0112
|
| 75 |
Benjamin Kirby, Jeffrey M. Kenkel, Andrew Y. Zhang, Bardia Amirlak, Thomas M. Suszynski. Three-dimensional (3D) synthetic printing for the manufacture of non-biodegradable models, tools and implants used in surgery: a review of current methods. Journal of Medical Engineering & Technology 2021; 45(1): 14 doi: 10.1080/03091902.2020.1838643
|
| 76 |
Pauline John, Irene Rose Antony, Ruban Whenish, Arackal Narayanan Jinoop. A review on fabrication of 3D printed biomaterials using optical methodologies for tissue engineering applications. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 2022; 236(11): 1583 doi: 10.1177/09544119221122856
|
| 77 |
R. Jayasree, K. Raghava, M. Sadhasivam, P.V.V. Srinivas, R. Vijay, K.G. Pradeep, T.N. Rao, D. Chakravarty. Bi-layered metal-ceramic component for dental implants by spark plasma sintering. Materials Letters 2023; 344: 134403 doi: 10.1016/j.matlet.2023.134403
|
| 78 |
Alessandro Ralls, Pankaj Kumar, Mano Misra, Pradeep L. Menezes. Material Design and Surface Engineering for Bio-implants. JOM 2020; 72(2): 684 doi: 10.1007/s11837-019-03687-2
|
| 79 |
Tamadur Albaraghtheh, Regine Willumeit-Römer, Berit Zeller-Plumhoff. In silico studies of magnesium-based implants: A review of the current stage and challenges. Journal of Magnesium and Alloys 2022; 10(11): 2968 doi: 10.1016/j.jma.2022.09.029
|
| 80 |
Adriana F. Magueta, M. Helena V. Fernandes, María J. Hortigüela, Gonzalo Otero-Irurueta, Paula M. Vilarinho. Poly (L-lactic acid) coatings on 316 SS substrates for biomedical devices: The impact of surface silanization. Progress in Organic Coatings 2021; 157: 106289 doi: 10.1016/j.porgcoat.2021.106289
|
| 81 |
Amit Mahajan, Sandeep Devgan, Sarabjeet Singh Sidhu. Surface alteration of biomedical alloys by electrical discharge treatment for enhancing the electrochemical corrosion, tribological and biological performances. Surface and Coatings Technology 2021; 405: 126583 doi: 10.1016/j.surfcoat.2020.126583
|
| 82 |
Parisa Edalati, Masayoshi Fuji, Kaveh Edalati. Superfunctional high-entropy alloys and ceramics by severe plastic deformation. Rare Metals 2023; 42(10): 3246 doi: 10.1007/s12598-023-02340-x
|
| 83 |
Elizabeth Gaston, John F. Fraser, Zhi Ping Xu, Hang T. Ta. Nano- and micro-materials in the treatment of internal bleeding and uncontrolled hemorrhage. Nanomedicine: Nanotechnology, Biology and Medicine 2018; 14(2): 507 doi: 10.1016/j.nano.2017.11.007
|
| 84 |
Neha K Urkande, Nikhil Mankar, Pradnya P Nikhade, Manoj Chandak. Understanding the Complexities of Cast Post Retention: A Comprehensive Review of Influential Factors. Cureus 2023; doi: 10.7759/cureus.51258
|
| 85 |
Irene Buj-Corral, Aitor Tejo-Otero, Felip Fenollosa-Artés. Development of AM Technologies for Metals in the Sector of Medical Implants. Metals 2020; 10(5): 686 doi: 10.3390/met10050686
|
| 86 |
S. Cavelier, S.A. Mirmohammadi, F. Barthelat. Titanium mesh-reinforced calcium sulfate for structural bone grafts. Journal of the Mechanical Behavior of Biomedical Materials 2021; 118: 104461 doi: 10.1016/j.jmbbm.2021.104461
|
| 87 |
Senthil Kumar Venkatraman, Genasan Krishnamurithy, Rajan Choudhary, Fedor Senatov, Hanumantha Rao Balaji Raghavendran, Malliga Raman Murali, Tunku Kamarul, Anushree Suresh, Jayanthi Abraham, Sumant Samuel, Abel Livingston, Sasikumar Swamiappan. Characterization of Sol–Gel Combustion Derived Akermanite and Merwinite for its Antibacterial Activity and Osteogenic Differentiation of Mesenchymal Stem Cells. Silicon 2023; 15(10): 4397 doi: 10.1007/s12633-023-02362-1
|
| 88 |
Eric Stevens, Maria L Marco. Bacterial extracellular electron transfer in plant and animal ecosystems. FEMS Microbiology Reviews 2023; 47(3) doi: 10.1093/femsre/fuad019
|
| 89 |
Agnese D'Agostino, Giulia Misiti, Alessandro Calogero Scalia, Matteo Pavarini, Andrea Fiorati, Andrea Cochis, Lia Rimondini, Vittoria Federica Borrini, Marcello Manfredi, Luca Andena, Luigi De Nardo, Roberto Chiesa. Gallium‐doped zirconia coatings modulate microbiological outcomes in dental implant surfaces. Journal of Biomedical Materials Research Part A 2024; 112(12): 2098 doi: 10.1002/jbm.a.37727
|
| 90 |
Arash Fattah-alhosseini, Razieh Chaharmahali, Armin Rajabi, Kazem Babaei, Mosab Kaseem. Performance of PEO/Polymer Coatings on the Biodegradability, Antibacterial Effect and Biocompatibility of Mg-Based Materials. Journal of Functional Biomaterials 2022; 13(4): 267 doi: 10.3390/jfb13040267
|
| 91 |
Hanaa Mehdi-Sefiani, Víctor Perez-Puyana, Francisco José Ostos, Ranier Sepúlveda, Alberto Romero, Mohammed Rafii-El-Idrissi Benhnia, Ernesto Chicardi. Type-A Gelatin-Based Hydrogel Infiltration and Degradation in Titanium Foams as a Potential Method for Localised Drug Delivery. Polymers 2023; 15(2): 275 doi: 10.3390/polym15020275
|
| 92 |
Soumya Soman, A.R. Ajitha. Fundamental Biomaterials: Metals. 2018; : 411 doi: 10.1016/B978-0-08-102205-4.00022-2
|
| 93 |
Krzysztof Szwajka, Joanna Zielińska-Szwajka, Tomasz Trzepieciński. Improving the Surface Integrity of 316L Steel in the Context of Bioimplant Applications. Materials 2023; 16(9): 3460 doi: 10.3390/ma16093460
|
| 94 |
John Daniel Arputharaj, Shahrooz Nafisi, Reza Ghomashchi. Printability and geometric capability of L-PBF in manufacturing thin circular cross-sections. Journal of Manufacturing Processes 2024; 129: 319 doi: 10.1016/j.jmapro.2024.08.054
|
| 95 |
Xinyi Xia, Chao-Ching Chiang, Sarathy K. Gopalakrishnan, Aniruddha V. Kulkarni, Fan Ren, Kirk J. Ziegler, Josephine F. Esquivel-Upshaw. Properties of SiCN Films Relevant to Dental Implant Applications. Materials 2023; 16(15): 5318 doi: 10.3390/ma16155318
|
| 96 |
Israel González de Torre, Arturo Ibáñez-Fonseca, Luis Quintanilla, Matilde Alonso, José-Carlos Rodríguez-Cabello. Random and oriented electrospun fibers based on a multicomponent, in situ clickable elastin-like recombinamer system for dermal tissue engineering. Acta Biomaterialia 2018; 72: 137 doi: 10.1016/j.actbio.2018.03.027
|
| 97 |
Cosmin M. Cotrut, Ionut C. Ionescu, Elena Ungureanu, Andrei Berbecaru, Raluca I. Zamfir, Alina Vladescu, Diana M. Vranceanu. Evaluation of surface modification techniques on the ability of apatite formation and corrosion behavior in synthetic body fluid: An in vitro study. Surfaces and Interfaces 2021; 22: 100866 doi: 10.1016/j.surfin.2020.100866
|
| 98 |
Rajko Turudija, Miloš Stojković, Jelena R. Stojković, Jovan Aranđelović, Dragan Marinković. Stiffness of Anatomically Shaped Lattice Scaffolds Made by Direct Metal Laser Sintering of Ti-6Al-4V Powder: A Comparison of Two Different Design Variants. Metals 2024; 14(2): 219 doi: 10.3390/met14020219
|
| 99 |
Ahmed Hindy, Farzam Farahmand, Fereydoun Pourdanesh, Maryam Torshabi, A. Hadi Al Janabi, Morteza Rasoulianboroujeni, Lobat Tayebi, Fahimeh S. Tabatabaei. Synthesis and characterization of 3D-printed functionally graded porous titanium alloy. Journal of Materials Science 2020; 55(21): 9082 doi: 10.1007/s10853-020-04645-z
|
| 100 |
Elham Saberian, Andrej Jenča, Yaser Zafari, Andrej Jenča, Adriána Petrášová, Janka Jenčová. The Regeneration in Dentistry with Scaffolds Application. 2024; doi: 10.5772/intechopen.115062
|
| 101 |
Dinesh Yadav, Ramesh Kumar Garg, Akash Ahlawat, Deepak Chhabra. 3D printable biomaterials for orthopedic implants: Solution for sustainable and circular economy. Resources Policy 2020; 68: 101767 doi: 10.1016/j.resourpol.2020.101767
|
| 102 |
Patrick Munyensanga, Meriame Bricha, Khalil El Mabrouk. Functional characterization of biomechanical loading and biocorrosion resistance properties of novel additively manufactured porous CoCrMo implant: Comparative analysis with gyroid and rhombic dodecahedron. Materials Chemistry and Physics 2024; 316: 129139 doi: 10.1016/j.matchemphys.2024.129139
|
| 103 |
M. Zribi, S. Baklouti. Phosphate-based geopolymers: a critical review. Polymer Bulletin 2022; 79(9): 6827 doi: 10.1007/s00289-021-03829-0
|
| 104 |
Neeraj Sharma, Gurpreet Singh, Munish Gupta, Hussien Hegab, Mozammel Mia. Investigations of surface integrity, bio-activity and performance characteristics during wire-electrical discharge machining of Ti-6Al-7Nb biomedical alloy. Materials Research Express 2019; 6(9): 096568 doi: 10.1088/2053-1591/ab3094
|
| 105 |
K. Gurusami, K. Shanmuga Sundaram, D. Chandramohan, S. Dinesh Kumar, P. Vasantha Srinivasan, T. Sathish. A comparative study on surface strengthening characterisation and residual stresses of dental alloys using laser shock peening. International Journal of Ambient Energy 2021; 42(15): 1740 doi: 10.1080/01430750.2019.1614987
|
| 106 |
Mariana F. Vassal, J. Nunes-Pereira, Sónia P. Miguel, Ilídio J. Correia, Abílio P. Silva. Microstructural, mechanical and biological properties of hydroxyapatite - CaZrO3 biocomposites. Ceramics International 2019; 45(7): 8195 doi: 10.1016/j.ceramint.2019.01.122
|
| 107 |
Ch. Daulbayev, Z. Mansurov, G. Mitchell, A. Zakhidov. Obtaining of Biologically Soluble Membranes Based on Polymeric Nanofibres and Hydroxyapatite of Calcium. Eurasian Chemico-Technological Journal 2018; 20(2): 119 doi: 10.18321/ectj690
|
| 108 |
Nabil Mehta, Deborah J. Hall, Robin Pourzal, Grant E. Garrigues. The Biomaterials of Total Shoulder Arthroplasty. JBJS Reviews 2020; 8(9): e19.00212 doi: 10.2106/JBJS.RVW.19.00212
|
| 109 |
Gurmohan Singh, Abhineet Saini. Advances in Materials Processing. Lecture Notes in Mechanical Engineering 2020; : 197 doi: 10.1007/978-981-15-4748-5_20
|
| 110 |
Daniel Ruiz-Diaz, Joaquín Manjarrez-Marmolejo, Araceli Diaz-Ruiz, Camilo Ríos, María G. Olayo, Roberto Olayo, Guillermo J. Cruz, Hermelinda Salgado-Ceballos, Marisela Mendez-Aramenta, Juan Morales-Corona. Development and Characterization of Electrodes Coated with Plasma-Synthesized Polypyrrole Doped with Iodine, Implanted in the Rat Brain Subthalamic Nucleus. Polymers 2024; 16(6): 823 doi: 10.3390/polym16060823
|
| 111 |
D.V. Mashtalyar, I.M. Imshinetskiy, V.V. Kashepa, K.V. Nadaraia, M.A. Piatkova, A.I. Pleshkova, K.A. Fomenko, A.Yu. Ustinov, S.L. Sinebryukhov, S.V. Gnedenkov. Effect of Ta2O5 nanoparticles on bioactivity, composition, structure, in vitro and in vivo behavior of PEO coatings on Mg-alloy. Journal of Magnesium and Alloys 2024; 12(6): 2360 doi: 10.1016/j.jma.2024.06.014
|
| 112 |
Maria-Eirini Grigora, Zoi Terzopoulou, Diana Baciu, Theodore Steriotis, Georgia Charalambopoulou, Eleni Gounari, Dimitrios N. Bikiaris, Dimitrios Tzetzis. 3D printed poly(lactic acid)-based nanocomposite scaffolds with bioactive coatings for tissue engineering applications. Journal of Materials Science 2023; 58(6): 2740 doi: 10.1007/s10853-023-08149-4
|
| 113 |
Silvia Panseri, Monica Montesi, Samuele Maria Dozio, Elisa Savini, Anna Tampieri, Monica Sandri. Biomimetic Scaffold with Aligned Microporosity Designed for Dentin Regeneration. Frontiers in Bioengineering and Biotechnology 2016; 4 doi: 10.3389/fbioe.2016.00048
|
| 114 |
Xuefei Zhang, Yuan Zhang, Matthew Z. Yates. Hydroxyapatite Nanocrystal Deposited Titanium Dioxide Nanotubes Loaded with Antibiotics for Combining Biocompatibility and Antibacterial Properties. MRS Advances 2018; 3(30): 1703 doi: 10.1557/adv.2018.114
|
| 115 |
V Yu Skeeba, V V Ivancivsky. Modeling knee joint endoprosthesis mode of deformation. IOP Conference Series: Materials Science and Engineering 2018; 327: 042120 doi: 10.1088/1757-899X/327/4/042120
|
| 116 |
Adarsh Mathew Abraham, Subramani Venkatesan. A review on application of biomaterials for medical and dental implants. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2023; 237(2): 249 doi: 10.1177/14644207221121981
|
| 117 |
Milena R. Kaluđerović, Joachim P. Schreckenbach, Hans-Ludwig Graf. Titanium dental implant surfaces obtained by anodic spark deposition – From the past to the future. Materials Science and Engineering: C 2016; 69: 1429 doi: 10.1016/j.msec.2016.07.068
|
| 118 |
Patrick Kiele, Paul Cvancara, Michael Langenmair, Matthias Mueller, Thomas Stieglitz. Thin Film Metallization Stacks Serve as Reliable Conductors on Ceramic-Based Substrates for Active Implants. IEEE Transactions on Components, Packaging and Manufacturing Technology 2020; 10(11): 1803 doi: 10.1109/TCPMT.2020.3026583
|
| 119 |
Katja Andrina Kravanja, Matjaž Finšgar. Analytical Techniques for the Characterization of Bioactive Coatings for Orthopaedic Implants. Biomedicines 2021; 9(12): 1936 doi: 10.3390/biomedicines9121936
|
| 120 |
Milena Kaluđerović, Tamara Krajnović, Danijela Maksimović-Ivanić, Hans-Ludwig Graf, Sanja Mijatović. Ti-SLActive and TiZr-SLActive Dental Implant Surfaces Promote Fast Osteoblast Differentiation. Coatings 2017; 7(7): 102 doi: 10.3390/coatings7070102
|
| 121 |
Helena Otmacic Curkovic, Marina Ivanko, Darko Pop Acev, Ervin Kamenar, Ivana Jelovica Badovinac, Stjepan Spalj. Corrosion of Dental Alloys Used for Mini Implants in Simulated Oral Environment. International Journal of Electrochemical Science 2021; 16(8): 21085 doi: 10.20964/2021.08.15
|
| 122 |
Trinath Biswal, Sushant Kumar BadJena, Debabrata Pradhan. Sustainable biomaterials and their applications: A short review. Materials Today: Proceedings 2020; 30: 274 doi: 10.1016/j.matpr.2020.01.437
|
| 123 |
John W. Nicholson. Titanium Alloys for Dental Implants: A Review. Prosthesis 2020; 2(2): 100 doi: 10.3390/prosthesis2020011
|
| 124 |
Maria Vardaki, Shiva Mohajernia, Aida Pantazi, Ionela Cristina Nica, Marius Enachescu, Anca Mazare, Ioana Demetrescu, Patrik Schmuki. Post treatments effect on TiZr nanostructures fabricated via anodizing. Journal of Materials Research and Technology 2019; 8(6): 5802 doi: 10.1016/j.jmrt.2019.09.049
|
| 125 |
Remya Mohanraj. Materials for Biomedical Engineering. 2019; : 19 doi: 10.1016/B978-0-12-818415-8.00002-4
|
| 126 |
Girish Chandra, Ajay Pandey. Biodegradable bone implants in orthopedic applications: a review. Biocybernetics and Biomedical Engineering 2020; 40(2): 596 doi: 10.1016/j.bbe.2020.02.003
|
| 127 |
Muataz A. Osman, Rasha A. Alamoush, Evgeny Kushnerev, Kevin G. Seymour, Susan Shawcross, Julian M. Yates. In-Vitro Phenotypic Response of Human Osteoblasts to Different Degrees of Titanium Surface Roughness. Dentistry Journal 2022; 10(8): 140 doi: 10.3390/dj10080140
|
| 128 |
Armin Kammermeier, Martin Rosentritt, Michael Behr, Sibylle Schneider-Feyrer, Verena Preis. In vitro performance of one- and two-piece zirconia implant systems for anterior application. Journal of Dentistry 2016; 53: 94 doi: 10.1016/j.jdent.2016.08.004
|
| 129 |
Farzad Soleymani, Rahmatollah Emadi, Sorour Sadeghzade, Fariborz Tavangarian. Bioactivity Behavior Evaluation of PCL-Chitosan-Nanobaghdadite Coating on AZ91 Magnesium Alloy in Simulated Body Fluid. Coatings 2020; 10(3): 231 doi: 10.3390/coatings10030231
|
| 130 |
María Rizo-Gorrita, Ignacio Fernandez-Asian, Andreina Garcia-de-Frenza, Celia Vazquez-Pachon, Maria-Angeles Serrera-Figallo, Daniel Torres-Lagares, Jose-Luis Gutierrez-Perez. Influence of Three Dental Implant Surfaces on Cell Viability and Bone Behavior. An In Vitro and a Histometric Study in a Rabbit Model. Applied Sciences 2020; 10(14): 4790 doi: 10.3390/app10144790
|
| 131 |
Vaibhav Madiwal, Bhushan Khairnar, Jyutika Rajwade. Enhanced antibacterial activity and superior biocompatibility of cobalt-deposited titanium discs for possible use in implant dentistry. iScience 2024; 27(2): 108827 doi: 10.1016/j.isci.2024.108827
|
| 132 |
Alexandra Dreanca, Marieta Muresan-Pop, Marian Taulescu, Zsejke-Réka Tóth, Sidonia Bogdan, Cosmin Pestean, Stephie Oren, Corina Toma, Andra Popescu, Emőke Páll, Bogdan Sevastre, Lucian Baia, Klara Magyari. Bioactive glass-biopolymers‑gold nanoparticle based composites for tissue engineering applications. Materials Science and Engineering: C 2021; 123: 112006 doi: 10.1016/j.msec.2021.112006
|
| 133 |
Aslı Bozkurt, Gaye Ö. Çakal, Şule Kaya-Keleş, Ayşe Kaşkaş. Comparison of h-BN material with metal implants in radiotherapy applications: Characterization and dose distribution measurements in LINAC. Radiation Physics and Chemistry 2023; 212: 111152 doi: 10.1016/j.radphyschem.2023.111152
|
| 134 |
Khurram Munir, Arne Biesiekierski, Cuie Wen, Yuncang Li. Structural Biomaterials. 2021; : 1 doi: 10.1016/B978-0-12-818831-6.00009-4
|
| 135 |
Charlotte T. Rodrigues Neves, Sander W. Spiekstra, Niels P. J. de Graaf, Thomas Rustemeyer, Albert J. Feilzer, Cees J. Kleverlaan, Susan Gibbs. Titanium salts tested in reconstructed human skin with integrated MUTZ‐3‐derived Langerhans cells show an irritant rather than a sensitizing potential. Contact Dermatitis 2020; 83(5): 337 doi: 10.1111/cod.13666
|
| 136 |
Jaideep Adhikari, Prosenjit Saha, Arijit Sinha. Fundamental Biomaterials: Metals. 2018; : 299 doi: 10.1016/B978-0-08-102205-4.00014-3
|
| 137 |
K. Bavya Devi, Samit Kumar Nandi, Mangal Roy. Magnesium Silicate Bioceramics for Bone Regeneration: A Review. Journal of the Indian Institute of Science 2019; 99(3): 261 doi: 10.1007/s41745-019-00119-7
|
| 138 |
Christian Wight, David-Michael Phillips, Cari Whyne. Wear reduction of orthopaedic implants through Cryogenic Thermal Cycling. Journal of the Mechanical Behavior of Biomedical Materials 2022; 135: 105420 doi: 10.1016/j.jmbbm.2022.105420
|
| 139 |
Rahul Shukla, Priya Mishra, Mayank Handa, Md Saquib Hasnain, Sarwar Beg. Chitosan in Drug Delivery. 2022; : 133 doi: 10.1016/B978-0-12-819336-5.00003-0
|
| 140 |
Farahnaz Haftlang, Abbas Zarei-Hanzaki, Hamid Reza Abedi, Mohammad Amin Kalaei. Tribological Performance and Electrochemical Behavior of Ti‐29Nb‐14Ta‐4.5Zr Alloy in Simulated Physiological Solution. Advanced Engineering Materials 2020; 22(2) doi: 10.1002/adem.201900758
|
| 141 |
Ayisha Saleem, Ghulam Khadija, Zafrin Akhtar, Sadia Mumtaz, Sana Rukhsar, Mussarat Rafiq, Manam Rubab, Gull e Zahra, Iram Naseer, Ather Ibrahim, Furhan Iqbal. Short-term exposure to titanium, aluminum and niobium (Ti-6Al-4Nb) alloy powder can disturb the serum low-density lipoprotein concentrations and antioxidant profile in vital organs but not the behavior of male albino mice. Drug and Chemical Toxicology 2020; 43(3): 298 doi: 10.1080/01480545.2018.1525394
|
| 142 |
Ankita Awasthi, Kuldeep K Saxena, Ravi K Dwivedi. An investigation on classification and characterization of bio materials and additive manufacturing techniques for bioimplants. Materials Today: Proceedings 2021; 44: 2061 doi: 10.1016/j.matpr.2020.12.176
|
| 143 |
Muhammad Umar Farooq, Haider Ali Bhatti, Muhammad Asad, M. Saravana Kumar, Sadaf Zahoor, Aqib Mashood Khan. Surface generation on titanium alloy through powder-mixed electric discharge machining with the focus on bioimplant applications. The International Journal of Advanced Manufacturing Technology 2022; 122(3-4): 1395 doi: 10.1007/s00170-022-09927-1
|
| 144 |
Mary Josephine McIvor, Preetam K. Sharma, Catherine E. Birt, Hayley McDowell, Shannon Wilson, Stephen McKillop, Jonathan G. Acheson, Adrian R. Boyd, Brian J. Meenan. Direct monitoring of single-cell response to biomaterials by Raman spectroscopy. Journal of Materials Science: Materials in Medicine 2021; 32(12) doi: 10.1007/s10856-021-06624-5
|
| 145 |
Katherine Ríos-Puerta, Omar Darío Gutiérrez-Florez. Aleaciones metálicas para aplicaciones ortopédicas: una revisión sobre su respuesta al estrés fisiológico y a los procesos de corrosión. Revista Politécnica 2022; 18(35): 24 doi: 10.33571/rpolitec.v18n35a2
|
| 146 |
Khondoker Safin Kaosar Saad, Tasfia Saba, Adib Bin Rashid. Application of PVD coatings in medical implantology for enhanced performance, biocompatibility, and quality of life. Heliyon 2024; 10(16): e35541 doi: 10.1016/j.heliyon.2024.e35541
|
| 147 |
Lambang Bargowo, Banun Kusumawardhani, Sonny Perdana, I Komang Evan Wijaksana, Tania Saskianti, Rini Devijanti Ridwan, Darmawan Setijanto, Chiquita Prahasanti, Shahabe Saquib Abullais. Expression of osteopontin and osteocalcin in Osteoblast cells exposed to a combination of polymethylmethacrylate (PMMA) and hydroxyapatite (HAp): A prospective observational study. Medicine 2024; 103(42): e40088 doi: 10.1097/MD.0000000000040088
|
| 148 |
Israel González-Méndez, Kendra Sorroza-Martínez, Ernesto Rivera. Design and Applications of Microneedles in Drug Delivery and Therapeutics. 2024; : 65 doi: 10.1016/B978-0-443-13881-2.00018-7
|
| 149 |
M. Martínez-Calderon, M. Manso-Silván, A. Rodríguez, M. Gómez-Aranzadi, J. P. García-Ruiz, S. M. Olaizola, R. J. Martín-Palma. Surface micro- and nano-texturing of stainless steel by femtosecond laser for the control of cell migration. Scientific Reports 2016; 6(1) doi: 10.1038/srep36296
|
| 150 |
Priya Bansal, Deepti Katiyar, Surya Prakash, N.G. Raghavendra Rao, Vidhu Saxena, Vinay Kumar, Abhishek Kumar. Applications of some biopolymeric materials as medical implants: An overview. Materials Today: Proceedings 2022; 65: 3377 doi: 10.1016/j.matpr.2022.05.480
|
| 151 |
Madeeha Riaz, Saba Shahzadi, Hina Imtiaz, Tousif Hussain. Effects of Ag, Cu or Fe addition on microstructure and comprehensive properties of biodegradable Zn-Mg alloy. Materials Today Communications 2024; 38: 108513 doi: 10.1016/j.mtcomm.2024.108513
|
| 152 |
Galih Adhi Kurniawan, Andoko Andoko, Retno Wulandari, Sunomo Sunomo, Agus Dwi Putra. Physical Properties Characterization and Design Comparation of Knee Implant with Ti6Al4V Material. Key Engineering Materials 2020; 851: 97 doi: 10.4028/www.scientific.net/KEM.851.97
|
| 153 |
Shiyang Liu, Damon Kent, Nghiem Doan, Matthew Dargusch, Gui Wang. Effects of deformation twinning on the mechanical properties of biodegradable Zn-Mg alloys. Bioactive Materials 2019; 4: 8 doi: 10.1016/j.bioactmat.2018.11.001
|
| 154 |
Zhe Shi, Qiang Zhong, Yuhang Chen, Jian Gao, Xin Pan, Qiang Lian, Rong Chen, Pinkai Wang, Jian Wang, Zhanjun Shi, Hao Cheng. Nanohydroxyapatite, Nanosilicate-Reinforced Injectable, and Biomimetic Gelatin-Methacryloyl Hydrogel for Bone Tissue Engineering. International Journal of Nanomedicine 2021; : 5603 doi: 10.2147/IJN.S321387
|
| 155 |
Karthika Prasad, Olha Bazaka, Ming Chua, Madison Rochford, Liam Fedrick, Jordan Spoor, Richard Symes, Marcus Tieppo, Cameron Collins, Alex Cao, David Markwell, Kostya (Ken) Ostrikov, Kateryna Bazaka. Metallic Biomaterials: Current Challenges and Opportunities. Materials 2017; 10(8): 884 doi: 10.3390/ma10080884
|
| 156 |
Reihaneh G. Mauer, Aida Shadrav, Mahmood Dashti. Innovative Perspectives in Oral and Maxillofacial Surgery. 2021; : 35 doi: 10.1007/978-3-030-75750-2_7
|
| 157 |
Pasquale Marrazzo, Cian O’Leary. Repositioning Natural Antioxidants for Therapeutic Applications in Tissue Engineering. Bioengineering 2020; 7(3): 104 doi: 10.3390/bioengineering7030104
|
| 158 |
Mariana Brito da Cruz, Joana Faria Marques, Beatriz Ferreira Fernandes, Paulo Pinto, Sara Madeira, Óscar Carvalho, Filipe Samuel Silva, João Manuel Mendez Caramês, António Duarte Sola Pereira da Mata. Laser surface treatment on Yttria‐stabilized zirconia dental implants: Influence on cell behavior. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2022; 110(1): 249 doi: 10.1002/jbm.b.34909
|
| 159 |
M. Indira, B. Sudarsini, B. Sumalatha. Textile Materials for Good Health and Wellbeing. SDGs and Textiles 2024; : 197 doi: 10.1007/978-981-97-6496-9_13
|
| 160 |
Derick Yongabi, Mehran Khorshid, Alessia Gennaro, Stijn Jooken, Sam Duwé, Olivier Deschaume, Patricia Losada-Pérez, Peter Dedecker, Carmen Bartic, Michael Wübbenhorst, Patrick Wagner. QCM-D Study of Time-Resolved Cell Adhesion and Detachment: Effect of Surface Free Energy on Eukaryotes and Prokaryotes. ACS Applied Materials & Interfaces 2020; 12(16): 18258 doi: 10.1021/acsami.0c00353
|
| 161 |
Gi Doo Cha, Dayoung Kang, Jongha Lee, Dae‐Hyeong Kim. Bioresorbable Electronic Implants: History, Materials, Fabrication, Devices, and Clinical Applications. Advanced Healthcare Materials 2019; 8(11) doi: 10.1002/adhm.201801660
|
| 162 |
Masahiro Okada, Takuya Matsumoto. Solid-state inorganic and metallic adhesives for soft biological tissues. Japanese Dental Science Review 2023; 59: 439 doi: 10.1016/j.jdsr.2023.11.003
|
| 163 |
Guo Liu, Yunhu He, Pengchao Liu, Zhou Chen, Xuliang Chen, Lei Wan, Ying Li, Jian Lu. Development of Bioimplants with 2D, 3D, and 4D Additive Manufacturing Materials. Engineering 2020; 6(11): 1232 doi: 10.1016/j.eng.2020.04.015
|
| 164 |
A. P. Sgouros, G. G. Vogiatzis, G. Megariotis, C. Tzoumanekas, D. N. Theodorou. Multiscale Simulations of Graphite-Capped Polyethylene Melts: Brownian Dynamics/Kinetic Monte Carlo Compared to Atomistic Calculations and Experiment. Macromolecules 2019; 52(19): 7503 doi: 10.1021/acs.macromol.9b01379
|
| 165 |
Muataz A. Osman, Rasha A. Alamoush, Evgeny Kushnerev, Kevin.G. Seymour, Susan Shawcross, Julian M. Yates. Human osteoblasts response to different dental implant abutment materials: An in-vitro study. Dental Materials 2022; 38(9): 1547 doi: 10.1016/j.dental.2022.07.005
|
| 166 |
Cigdem Yesildag, Zhaofei Ouyang, Zhenfang Zhang, Marga C. Lensen. Micro-Patterning of PEG-Based Hydrogels With Gold Nanoparticles Using a Reactive Micro-Contact-Printing Approach. Frontiers in Chemistry 2019; 6 doi: 10.3389/fchem.2018.00667
|
| 167 |
Lukasova Vera, Buzgo Matej, Vocetkova Karolina, Kubíková Tereza, Tonar Zbyněk, Doupnik Miroslav, Blahnova Veronika, Litvinec Andrej, Sovkova Vera, Voltrová Barbora, Staffa Andrea, Svora Petr, Kralickova Milena, Amler Evzen, Filova Eva, Rustichelli Franco, Rampichova Michala. Osteoinductive 3D scaffolds prepared by blend centrifugal spinning for long-term delivery of osteogenic supplements. RSC Advances 2018; 8(39): 21889 doi: 10.1039/C8RA02735H
|
| 168 |
Gouthamaraj Kanapaakala, Venkatesan Subramani. A comprehensive review of Gum metal's potential as a biomedical material. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2024; 238(7): 1200 doi: 10.1177/14644207231223640
|
| 169 |
Xiaohong Wang, Heinz C. Schröder, Werner E. G. Müller. Amorphous polyphosphate, a smart bioinspired nano-/bio-material for bone and cartilage regeneration: towards a new paradigm in tissue engineering. Journal of Materials Chemistry B 2018; 6(16): 2385 doi: 10.1039/C8TB00241J
|
| 170 |
O.O. Daramola, J.L. Olajide, I.O. Oladele, A.A. Adediran, B.O. Adewuyi, A.A. Muhammed, E.R. Sadiku. Mechanical and wear behaviour of polylactic acid matrix composites reinforced with crab-shell synthesized chitosan microparticles. Materials Today: Proceedings 2021; 38: 999 doi: 10.1016/j.matpr.2020.05.599
|
| 171 |
Marcel Modrák, Marianna Trebuňová, Alena Findrik Balogová, Radovan Hudák, Jozef Živčák. Biodegradable Materials for Tissue Engineering: Development, Classification and Current Applications. Journal of Functional Biomaterials 2023; 14(3): 159 doi: 10.3390/jfb14030159
|
| 172 |
Peng Xue, Qian Li, Yuan Li, Lihong Sun, Lei Zhang, Zhigang Xu, Yuejun Kang. Surface Modification of Poly(dimethylsiloxane) with Polydopamine and Hyaluronic Acid To Enhance Hemocompatibility for Potential Applications in Medical Implants or Devices. ACS Applied Materials & Interfaces 2017; 9(39): 33632 doi: 10.1021/acsami.7b10260
|
| 173 |
Murad Ali, M.A. Hussein, N. Al-Aqeeli. Magnesium-based composites and alloys for medical applications: A review of mechanical and corrosion properties. Journal of Alloys and Compounds 2019; 792: 1162 doi: 10.1016/j.jallcom.2019.04.080
|
| 174 |
Guangsheng Song, Zhihui Qian, Kunyang Wang, Jing Liu, Yuyang Wei, Fabio Galbusera, Zhenmin Zou, Hans-Joachim Wilke, Luquan Ren, Lei Ren. Total disc replacement devices: Structure, material, fabrication, and properties. Progress in Materials Science 2023; 140: 101189 doi: 10.1016/j.pmatsci.2023.101189
|
| 175 |
Utpal Deka, Bivek Pradhan. Effect of plasma sheath with secondary electron emission on the Ti N chemical bond formation in titanium dental implantation. Materials Today: Proceedings 2022; 58: 656 doi: 10.1016/j.matpr.2022.02.082
|
| 176 |
Sudip Saha, Sougata Roy. Metallic Dental Implants Wear Mechanisms, Materials, and Manufacturing Processes: A Literature Review. Materials 2022; 16(1): 161 doi: 10.3390/ma16010161
|
| 177 |
Mônica Rufino Senra, Maria de Fátima Vieira Marques. Synthetic Polymeric Materials for Bone Replacement. Journal of Composites Science 2020; 4(4): 191 doi: 10.3390/jcs4040191
|
| 178 |
Neslihan Sarigul. Evaluation of the effect of field sizes on radiation dose in the presence of metal materials using Monte Carlo simulation. Applied Radiation and Isotopes 2022; 182: 110143 doi: 10.1016/j.apradiso.2022.110143
|
| 179 |
Shiva Kamini Divakarla, Seiji Yamaguchi, Tadashi Kokubo, Dong-Wook Han, Jae Ho Lee, Wojciech Chrzanowski. Improved bioactivity of GUMMETAL®, Ti59Nb36Ta2Zr3O0.3, via formation of nanostructured surfaces. Journal of Tissue Engineering 2018; 9 doi: 10.1177/2041731418774178
|
| 180 |
Nallathambi Arun, Muniyandi Prakash. The effects of the process parameters on shoulderless friction stir processing on the tribological properties of polylactic acid/basalt composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2024; 238(4): 663 doi: 10.1177/14644207231195725
|
| 181 |
Vanessa T. Trossmann, Sarah Lentz, Thomas Scheibel. Factors Influencing Properties of Spider Silk Coatings and Their Interactions within a Biological Environment. Journal of Functional Biomaterials 2023; 14(8): 434 doi: 10.3390/jfb14080434
|
| 182 |
Vasuudhaa Sonawane, Ratnakar R. Ghorpade. Techno-societal 2022. 2024; : 599 doi: 10.1007/978-3-031-34644-6_61
|
| 183 |
Ohan Mazigi, M. Bobby Kannan, Jia Xu, Han-Cheol Choe, Qingsong Ye. Biocompatibility and Degradation of a Low Elastic Modulus Ti-35Nb-3Zr Alloy: Nanosurface Engineering for Enhanced Degradation Resistance. ACS Biomaterials Science & Engineering 2017; 3(4): 509 doi: 10.1021/acsbiomaterials.6b00563
|
| 184 |
Venina dos Santos, Rosmary Nichele Brandalise, Michele Savaris. Engineering of Biomaterials. Topics in Mining, Metallurgy and Materials Engineering 2017; : 5 doi: 10.1007/978-3-319-58607-6_2
|
| 185 |
Anna Minkiewicz-Zochniak, Sylwia Jarzynka, Agnieszka Iwańska, Kamila Strom, Bartłomiej Iwańczyk, Marta Bartel, Maciej Mazur, Anna Pietruczuk-Padzik, Małgorzata Konieczna, Ewa Augustynowicz-Kopeć, Gabriela Olędzka. Biofilm Formation on Dental Implant Biomaterials by Staphylococcus aureus Strains Isolated from Patients with Cystic Fibrosis. Materials 2021; 14(8): 2030 doi: 10.3390/ma14082030
|
| 186 |
Sadaf Zahoor, Muhammad Qaiser Saleem, Walid Abdul-Kader, Kashif Ishfaq, Adeel Shehzad, Hafiz Usman Ghani, Amir Hussain, Muhammad Usman, Muhammad Dawood. Improving surface integrity aspects of AISI 316L in the context of bioimplant applications. The International Journal of Advanced Manufacturing Technology 2019; 105(7-8): 2857 doi: 10.1007/s00170-019-04444-0
|
| 187 |
Xuemin Liu, Kai Wu, Liang Gao, Liping Wang, Xuetao Shi. Biomaterial strategies for the application of reproductive tissue engineering. Bioactive Materials 2022; 14: 86 doi: 10.1016/j.bioactmat.2021.11.023
|
| 188 |
Darlin Lantigua, Yan Ni Kelly, Baris Unal, Gulden Camci‐Unal. Engineered Paper‐Based Cell Culture Platforms. Advanced Healthcare Materials 2017; 6(22) doi: 10.1002/adhm.201700619
|
| 189 |
Tibor Bedo, Sorin Ion Munteanu, Ioana Popescu, Alexandru Chiriac, Mihai Alin Pop, Ioan Milosan, Daniel Munteanu. Method for translating 3D bone defects into personalized implants made by Additive Manufacturing. Materials Today: Proceedings 2019; 19: 1032 doi: 10.1016/j.matpr.2019.08.018
|
| 190 |
Ashish Ranjan Sharma, Yeon-Hee Lee, Buyankhishig Gankhuyag, Chiranjib Chakraborty, Sang-Soo Lee. Effect of Alumina Particles on the Osteogenic Ability of Osteoblasts. Journal of Functional Biomaterials 2022; 13(3): 105 doi: 10.3390/jfb13030105
|
| 191 |
Three-Dimensional Printing of Innovative Intramedullary Pin Profiles with Direct Metal Laser Sintering. Journal of Materials Engineering and Performance 2022; 31(1): 240 doi: 10.1007/s11665-021-06176-3
|
| 192 |
Xunyuan Jiang, Yitong Yao, Weiming Tang, Dongmei Han, Li Zhang, Ke Zhao, Shuanjin Wang, Yuezhong Meng. Design of dental implants at materials level: An overview. Journal of Biomedical Materials Research Part A 2020; 108(8): 1634 doi: 10.1002/jbm.a.36931
|
| 193 |
J. Venezuela, M.S. Dargusch. Addressing the slow corrosion rate of biodegradable Fe-Mn: Current approaches and future trends. Current Opinion in Solid State and Materials Science 2020; 24(3): 100822 doi: 10.1016/j.cossms.2020.100822
|
| 194 |
Yajie Liang, Olga Garaschuk. Microglia. Methods in Molecular Biology 2019; 2034: 243 doi: 10.1007/978-1-4939-9658-2_18
|
| 195 |
Meifeng He, Mingming Wang, Ke Zhang, Haitao Wang, Hong Jiang, Zhanjun Lu. Effect of Varying Ce Content on the Mechanical Properties and Corrosion Resistance of Low-Elastic-Modulus Mg-Zn-Ce Amorphous Alloys. Metals 2022; 12(10): 1637 doi: 10.3390/met12101637
|
| 196 |
Nikhil Kumar Singh, Anuj Pathak, Rohit Tomar, Mansi Chaudhary, Vaibhav Sharma, Parul Grover. Advancement in biomaterials used in implants. Materials Today: Proceedings 2023; doi: 10.1016/j.matpr.2023.09.137
|
| 197 |
Roger Jagdish Narayan, Nishant Verma. Materials for Chemical Sensing. 2017; : 123 doi: 10.1007/978-3-319-47835-7_6
|
| 198 |
Alexandre Mendonça Munhoz, Fabio Santanelli di Pompeo, Roberto De Mezerville. Nanotechnology, nanosurfaces and silicone gel breast implants: current aspects. Case Reports in Plastic Surgery and Hand Surgery 2017; 4(1): 99 doi: 10.1080/23320885.2017.1407658
|
| 199 |
Marcus Klutzny, Gurpal Singh, Rita Hameister, Gesine Goldau, Friedemann Awiszus, Bernd Feuerstein, Christian Stärke, Christoph H. Lohmann. Screw Track Osteolysis in the Cementless Total Knee Replacement Design. The Journal of Arthroplasty 2019; 34(5): 965 doi: 10.1016/j.arth.2018.12.040
|
| 200 |
Shrutika Sharma, Vishal Gupta, Deepa Mudgal. Current trends, applications, and challenges of coatings on additive manufacturing based biopolymers: A state of art review. Polymer Composites 2022; 43(10): 6749 doi: 10.1002/pc.26809
|
| 201 |
Martina Trávníčková, Lucie Bačáková. Application of adult mesenchymal stem cells in bone and vascular tissue engineering. Physiological Research 2018; doi: 10.33549/physiolres.933820
|
| 202 |
Jessica Gayle, Anil Mahapatro. Magnesium Based Biodegradable Metallic Implant Materials: Corrosion Control and Evaluation of Surface Coatings. Innovations in Corrosion and Materials Science (Formerly Recent Patents on Corrosion Science) 2019; 9(1): 3 doi: 10.2174/2352094909666190228113315
|
| 203 |
Uttam Bhandari, Hamed Ghadimi, Congyan Zhang, Feng Gao, Shizhong Yang, Shengmin Guo. Computational exploration of biomedical HfNbTaTiZr and Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy alloys. Materials Research Express 2021; 8(9): 096534 doi: 10.1088/2053-1591/ac1d65
|
| 204 |
A. Ritwik, K.K. Saju, P.K. Binsi, A.R. Reghuraj. Development of biocompatible coating on Ti6Al4V implant materials using chitosan extracted from shellfish waste. Materials Today: Proceedings 2021; 47: 5209 doi: 10.1016/j.matpr.2021.05.533
|
| 205 |
Stephan Schönecker, Xiaojie Li, Daixiu Wei, Shogo Nozaki, Hidemi Kato, Levente Vitos, Xiaoqing Li. Harnessing elastic anisotropy to achieve low-modulus refractory high-entropy alloys for biomedical applications. Materials & Design 2022; 215: 110430 doi: 10.1016/j.matdes.2022.110430
|
| 206 |
S. Estrada-Flores, A. Martínez-Luévanos, P. Bartolo-Pérez, L. A. García-Cerda, T. E. Flores-Guia, E. N. Aguilera-González. Facile synthesis of novel calcium silicate hydrated-nylon 6/66 nanocomposites by solution mixing method. RSC Advances 2018; 8(73): 41818 doi: 10.1039/C8RA07116K
|
| 207 |
Swati Jindal, Faisal Manzoor, Niall Haslam, Elena Mancuso. 3D printed composite materials for craniofacial implants: current concepts, challenges and future directions. The International Journal of Advanced Manufacturing Technology 2021; 112(3-4): 635 doi: 10.1007/s00170-020-06397-1
|
| 208 |
John Daniel Arputharaj, Shahrooz Nafisi, Reza Ghomashchi. TMS 2024 153rd Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series 2024; : 273 doi: 10.1007/978-3-031-50349-8_25
|
| 209 |
Mariana Brito da CRUZ, Joana Faria MARQUES, Beatriz Ferreira FERNANDES, Mafalda COSTA, Georgina MIRANDA, António Duarte Sola Pereira da MATA, João Manuel Mendez CARAMES, Filipe Samuel SILVA. Gingival fibroblasts behavior on bioactive zirconia and titanium dental implant surfaces produced by a functionally graded technique. Journal of Applied Oral Science 2020; 28 doi: 10.1590/1678-7757-2020-0100
|
| 210 |
Anshu Dubey, Satish Jaiswal, Swati Haldar, Partha Roy, Debrupa Lahiri. Mg-3Zn/HA Biodegradable Composites Synthesized via Spark Plasma Sintering for Temporary Orthopedic Implants. Journal of Materials Engineering and Performance 2019; 28(9): 5702 doi: 10.1007/s11665-019-04315-5
|
| 211 |
Josiane Arnaud, Nicolas Beauval, Muriel Bost, Ma’atem Béatrice Fofou-Callierez, Souleiman El Balkhi, Robert Garnier, Bénédicte Lelièvre, Sarah Romain, Martine Ropert Bouchet, Nourédine Sadeg, Jean Pierre Goullé. Intérêts d’inclure la détermination d’éléments inorganiques à la nomenclature des actes de biologie médicale. Toxicologie Analytique et Clinique 2020; 32(1): 33 doi: 10.1016/j.toxac.2019.07.005
|
| 212 |
Rajeshkumar Shanmugam, Lakshmi Thangavelu, Revathi Duraisamy, Dhanraj Ganapathy. Systematic Review on Hydroxyapatite and Chitosan Combination-coated Titanium Implants on Osseointegration. World Journal of Dentistry 2024; 15(1): 79 doi: 10.5005/jp-journals-10015-2358
|
| 213 |
Sharifah Almathami, Jeffrey Venezuela, Nan Yang, Yuan Wang, Zahrina Mardina, Matthew Dargusch. Exploring the Influence of Biologically Relevant Ions on the Corrosion Behavior of Biodegradable Zinc in Physiological Fluids. ACS Biomaterials Science & Engineering 2023; 9(5): 2301 doi: 10.1021/acsbiomaterials.2c00901
|
| 214 |
Chenxi Dou, Mingyang Zhang, Dechun Ren, Haibin Ji, Zhe Yi, Shaogang Wang, Zengqian Liu, Qiang Wang, Yufeng Zheng, Zhefeng Zhang, Rui Yang. Bi-continuous Mg-Ti interpenetrating-phase composite as a partially degradable and bioactive implant material. Journal of Materials Science & Technology 2023; 146: 211 doi: 10.1016/j.jmst.2022.11.011
|
| 215 |
Dawid Zarzeczny. INCREASING THE COST-EFFECTIVENESS OF IN VITRO RESEARCH THROUGH THE USE OF TITANIUM IN THE DEVICE FOR MEASURING THE ELECTRICAL PARAMETERS OF CELLS. Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska 2021; 11(4): 62 doi: 10.35784/iapgos.2826
|
| 216 |
Esra BALCİ. Metalik Biyomalzemelerin Yaşam Döngüsü Değerlendirmesi. Uşak Üniversitesi Fen ve Doğa Bilimleri Dergisi 2023; 7(1): 59 doi: 10.47137/usufedbid.1307658
|
| 217 |
Salwa El Baakili, Patrick Munyensanga, Meriame Bricha, Khalil El Mabrouk. Porous Metallic Implants from Additive Manufacturing to Biocorrosion: A Review.
Johnson Matthey Technology Review
2024; 68(1): 71 doi: 10.1595/205651324X16826780236175
|
| 218 |
Deepa Suhag. Handbook of Biomaterials for Medical Applications, Volume 2. Biomedical Materials for Multi-functional Applications 2024; : 235 doi: 10.1007/978-981-97-5906-4_8
|
| 219 |
Kara K. Poon, Stefan Schafföner, Mari-Ann Einarsrud, Julia Glaum. Barium titanate-based bilayer functional coatings on Ti alloy biomedical implants. Journal of the European Ceramic Society 2021; 41(4): 2918 doi: 10.1016/j.jeurceramsoc.2020.12.023
|
| 220 |
Priya Singh, Xiaojun Yu, Alok Kumar, Ashutosh Kumar Dubey. Recent advances in silicate-based crystalline bioceramics for orthopedic applications: a review. Journal of Materials Science 2022; 57(28): 13109 doi: 10.1007/s10853-022-07444-w
|
| 221 |
Yara Khalid AlMaimouni, Mashael Abdullah Benrashed, Nujood Ibrahim Alyousef, Asma Tufail Shah, Abdul Samad Khan. Dental Implants. 2020; : 93 doi: 10.1016/B978-0-12-819586-4.00006-8
|
| 222 |
VIJAY KUMAR MEENA, PARVEEN KALRA, RAVINDRA KUMAR SINHA. ADDITIVE MANUFACTURING PARAMETERS OPTIMIZATION OF Ti6AL4V ELI FOR MEDICAL IMPLANTS. Surface Review and Letters 2022; 29(03) doi: 10.1142/S0218625X22500408
|
| 223 |
Ning Ma, Shifeng Liu, Wei Liu, Lechun Xie, Daixiu Wei, Liqiang Wang, Lanjie Li, Beibei Zhao, Yan Wang. Research Progress of Titanium-Based High Entropy Alloy: Methods, Properties, and Applications. Frontiers in Bioengineering and Biotechnology 2020; 8 doi: 10.3389/fbioe.2020.603522
|
| 224 |
A T Hoang, W L Jong, N M Ung. Addressing the dose perturbation of metallic implant in spinal Stereotactic Body Radiotherapy (SBRT). Journal of Physics: Conference Series 2019; 1248(1): 012040 doi: 10.1088/1742-6596/1248/1/012040
|
| 225 |
Sekaran Saravanan, Selvaraj Vimalraj, Ganesh Lakshmanan, Ajita Jindal, Dhakshinamoorthy Sundaramurthi, Jaydeep Bhattacharya. Marine-Derived Biomaterials for Tissue Engineering Applications. Springer Series in Biomaterials Science and Engineering 2019; 14: 413 doi: 10.1007/978-981-13-8855-2_18
|
| 226 |
Dana Elkhalifa, Menatallah Rayan, Ahmed T. Negmeldin, Abdelbary Elhissi, Ashraf Khalil. Chemically modified mRNA beyond COVID-19: Potential preventive and therapeutic applications for targeting chronic diseases. Biomedicine & Pharmacotherapy 2022; 145: 112385 doi: 10.1016/j.biopha.2021.112385
|
| 227 |
Made Subekti Dwijaya, Muhammad Satrio Utomo, Galih Senopati, Fendy Rokhmanto, Talitha Asmaria. The effect of surface roughness on hydroxyapatite deposition on titanium alloys. 5TH INTERNATIONAL SEMINAR ON METALLURGY AND MATERIALS (ISMM2022): Strengthening research and innovation in metallurgy and materials for sustainable economic development 2024; 3003: 020079 doi: 10.1063/5.0186363
|
| 228 |
Dragos Vladimir Budei, Danut-Ionel Vaireanu, Petronela Prepelita, Gianina Popescu-Pelin, Mihaela Mincu, Ioana-Alina Ciobotaru. A comparative morphological study of titanium dioxide surface layer dental implants. Open Chemistry 2021; 19(1): 189 doi: 10.1515/chem-2021-0197
|
| 229 |
Michael Levin, Robert Spiro, Himanshu Jain, Matthias M Falk. Effects of Titanium Implant Surface Topology on Bone Cell Attachment and Proliferation in vitro. Medical Devices: Evidence and Research 2022; : 103 doi: 10.2147/MDER.S360297
|
| 230 |
Fahad Alam, Kartik M. Varadarajan, Joseph H. Koo, Brian L. Wardle, Shanmugam Kumar. Additively Manufactured Polyetheretherketone (PEEK) with Carbon Nanostructure Reinforcement for Biomedical Structural Applications. Advanced Engineering Materials 2020; 22(10) doi: 10.1002/adem.202000483
|
| 231 |
Arash Fattah-alhosseini, Razieh Chaharmahali, Mohsen K. Keshavarz, Kazem Babaei. Surface characterization of bioceramic coatings on Zr and its alloys using plasma electrolytic oxidation (PEO): A review. Surfaces and Interfaces 2021; 25: 101283 doi: 10.1016/j.surfin.2021.101283
|
| 232 |
Aditi Taunk, Renxun Chen, George Iskander, Kitty K. K. Ho, Basmah Almohaywi, David StClair Black, Mark D. P. Willcox, Naresh Kumar. The Role of Orientation of Surface Bound Dihydropyrrol-2-ones (DHP) on Biological Activity. Molecules 2019; 24(14): 2676 doi: 10.3390/molecules24142676
|
| 233 |
Chinmayee Nayak, Rishabh Kundu, Rajneesh Pandey, Kantesh Balani. Tribological properties of SS 304 and Ti6Al4V using four reciprocating geometries. Nanomaterials and Energy 2021; 10(1): 79 doi: 10.1680/jnaen.20.00051
|
| 234 |
Runki Saran, Kishore Ginjupalli, Sajan D. George, Santhosh Chidangil, Unnikrishnan V K. LASER as a tool for surface modification of dental biomaterials: A review. Heliyon 2023; 9(6): e17457 doi: 10.1016/j.heliyon.2023.e17457
|
| 235 |
Rachael Sharp, Matthew H. Pelletier, William R. Walsh, Cambre N. Kelly, Ken Gall. Corrosion Resistance of 3D Printed Ti6Al4V Gyroid Lattices with Varying Porosity. Materials 2022; 15(14): 4805 doi: 10.3390/ma15144805
|
| 236 |
Athos Henrique Plaine, Murillo Romero da Silva, Claudemiro Bolfarini. Effect of Thermo-Mechanical Treatments on the Microstructure and Mechanical Properties of the Metastable β-type Ti-35Nb-7Zr-5Ta Alloy. Materials Research 2018; 22(1) doi: 10.1590/1980-5373-mr-2018-0462
|
| 237 |
Lina Susana Silva-Bermudez, Harald Klüter, Julia G. Kzhyshkowska. Macrophages as a Source and Target of GDF-15. International Journal of Molecular Sciences 2024; 25(13): 7313 doi: 10.3390/ijms25137313
|
| 238 |
Han Wei Toh, Daniel Wee Yee Toong, Jaryl Chen Koon Ng, Valerie Ow, Shengjie Lu, Lay Poh Tan, Philip En Hou Wong, Subbu Venkatraman, Yingying Huang, Hui Ying Ang. Polymer blends and polymer composites for cardiovascular implants. European Polymer Journal 2021; 146: 110249 doi: 10.1016/j.eurpolymj.2020.110249
|
| 239 |
Yifeng Sheng, Li Tian, Chi Wu, Ling Qin, To Ngai. Biodegradable Poly(l-lactic acid) (PLLA) Coatings Fabricated from Nonsolvent Induced Phase Separation for Improving Corrosion Resistance of Magnesium Rods in Biological Fluids. Langmuir 2018; 34(36): 10684 doi: 10.1021/acs.langmuir.8b02322
|
| 240 |
Nuno Cruz, Javier Gil, Miquel Punset, José María Manero, João Paulo Tondela, Pablo Verdeguer, Conrado Aparicio, Elisa Rúperez. Relevant Aspects of Piranha Passivation in Ti6Al4V Alloy Dental Meshes. Coatings 2022; 12(2): 154 doi: 10.3390/coatings12020154
|
| 241 |
Cosmin Mihai Cotrut, Elena Ungureanu, Ionut Cornel Ionescu, Raluca Ioana Zamfir, Adrian Emil Kiss, Anca Constantina Parau, Alina Vladescu, Diana Maria Vranceanu, Adriana Saceleanu. Influence of Magnesium Content on the Physico-Chemical Properties of Hydroxyapatite Electrochemically Deposited on a Nanostructured Titanium Surface. Coatings 2022; 12(8): 1097 doi: 10.3390/coatings12081097
|
| 242 |
H.S. Dong, S.J. Qi. Realising the potential of graphene-based materials for biosurfaces – A future perspective. Biosurface and Biotribology 2015; 1(4): 229 doi: 10.1016/j.bsbt.2015.10.004
|
| 243 |
Hamisah Ismail, Hasmaliza Mohamad. Bioactivity and Biocompatibility Properties of Sustainable Wollastonite Bioceramics from Rice Husk Ash/Rice Straw Ash: A Review. Materials 2021; 14(18): 5193 doi: 10.3390/ma14185193
|
| 244 |
Milena Stevanović, Marija Đošić, Ana Janković, Vesna Kojić, Maja Vukašinović-Sekulić, Jovica Stojanović, Jadranka Odović, Milkica Crevar Sakač, Kyong Yop Rhee, Vesna Mišković-Stanković. Gentamicin-Loaded Bioactive Hydroxyapatite/Chitosan Composite Coating Electrodeposited on Titanium. ACS Biomaterials Science & Engineering 2018; 4(12): 3994 doi: 10.1021/acsbiomaterials.8b00859
|
| 245 |
Cassidy R. VanderSchee, D. Scott Bohle. The bioinorganic chemistry of the early transition metals in bone: distribution and uptake mechanisms. Coordination Chemistry Reviews 2023; 495: 215396 doi: 10.1016/j.ccr.2023.215396
|
| 246 |
Gouthamaraj Kanapaakala, Venkatesan Subramani. Predictive modeling for design of low elastic modulus and biocompatible β-Ti alloys: A comprehensive machine learning-data driven approach with XGBoost as the key predictor. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2024; 238(19): 9338 doi: 10.1177/09544062241253712
|
| 247 |
Saranya Varadarajan, Narasimman Muthusamy, Nithiyarajan Nambirajan, Rathinavel Pandian Manickavel, C.J. Venkatakrishnan, Jimson Samson, Raghunathan Jagannathan, Thodur Madapusi Balaji, S. Lakshmi Priya, Swaminathan Rajendran. Pharmacological Studies in Natural Oral Care. 2023; : 167 doi: 10.1002/9781394167197.ch9
|
| 248 |
Pawan Kumar, Meenu Saini, Brijnandan S. Dehiya, Anil Sindhu, Vinod Kumar, Ravinder Kumar, Luciano Lamberti, Catalin I. Pruncu, Rajesh Thakur. Comprehensive Survey on Nanobiomaterials for Bone Tissue Engineering Applications. Nanomaterials 2020; 10(10): 2019 doi: 10.3390/nano10102019
|
| 249 |
Joseph T Vecchi, Madeline Rhomberg, C Allan Guymon, Marlan R Hansen. The geometry of photopolymerized topography influences neurite pathfinding by directing growth cone morphology and migration. Journal of Neural Engineering 2024; 21(2): 026027 doi: 10.1088/1741-2552/ad38dc
|
| 250 |
Madalina Simona Baltatu, Andrei Victor Sandu, Marcin Nabialek, Petrica Vizureanu, Gabriela Ciobanu. Biomimetic Deposition of Hydroxyapatite Layer on Titanium Alloys. Micromachines 2021; 12(12): 1447 doi: 10.3390/mi12121447
|
| 251 |
Andrea Domingues Goncalves, Wendy Balestri, Yvonne Reinwald. Biomaterials. 2020; doi: 10.5772/intechopen.91295
|
| 252 |
Md Al-Amin, Ahmad Majdi Abdul Rani, Abdul Azeez Abdu Aliyu, Muhammad Al’Hapis Abdul Razak, Sri Hastuty, Michael G Bryant. Powder mixed-EDM for potential biomedical applications: A critical review. Materials and Manufacturing Processes 2020; 35(16): 1789 doi: 10.1080/10426914.2020.1779939
|
| 253 |
Bharat Kalia, Rupinder Singh, B. S. Pabla, Mritunjay Dureja. On Direct Metal Laser Sintering of Functionally Graded Material with Virgin and Mixed Powder. Arabian Journal for Science and Engineering 2024; 49(8): 11857 doi: 10.1007/s13369-023-08347-x
|
| 254 |
G Ciobanu, M Harja. Investigation on hydroxyapatite coatings formation on titanium surface. IOP Conference Series: Materials Science and Engineering 2018; 444: 032007 doi: 10.1088/1757-899X/444/3/032007
|
| 255 |
Sukumaran Anil, Elna Paul Chalisserry, Seung Yun Nam, Jayachandran Venkatesan. Advanced Dental Biomaterials. 2019; : 643 doi: 10.1016/B978-0-08-102476-8.00025-6
|
| 256 |
L. M. Marques, M. M. Alves, S. Eugénio, S. B. Salazar, N. Pedro, L. Grenho, N. P. Mira, M. H. Fernandes, M. F. Montemor. Potential anti-cancer and anti-Candida activity of Zn-derived foams. Journal of Materials Chemistry B 2018; 6(18): 2821 doi: 10.1039/C7TB02726E
|
| 257 |
Aref Trigui, Sami Hached, Ahmed Chiheb Ammari, Yvon Savaria, Mohamad Sawan. Maximizing Data Transmission Rate for Implantable Devices Over a Single Inductive Link: Methodological Review. IEEE Reviews in Biomedical Engineering 2019; 12: 72 doi: 10.1109/RBME.2018.2873817
|
| 258 |
Jean Pierre Ndabakuranye, Shiqiang Li, Genia Burchall, Kate Fox, Terry Piva, Zhangyu Xu, Omid Kavehei, Steven Prawer, Arman Ahnood. 70 years of bilirubin sensing: towards the point-of-care bilirubin monitoring in cirrhosis and hyperbilirubinemia. Sensors & Diagnostics 2022; 1(5): 932 doi: 10.1039/D2SD00033D
|
| 259 |
Darya Alontseva, Yuliya Safarova (Yantsen), Sergii Voinarovych, Aleksei Obrosov, Ridvan Yamanoglu, Fuad Khoshnaw, Hasan Ismail Yavuz, Assem Nessipbekova, Aizhan Syzdykova, Bagdat Azamatov, Alexandr Khozhanov, Sabine Weiß. Biocompatibility and Corrosion of Microplasma-Sprayed Titanium and Tantalum Coatings versus Titanium Alloy. Coatings 2024; 14(2): 206 doi: 10.3390/coatings14020206
|
| 260 |
Lohashenpahan Shanmuganantha, Azmi Baharudin, Abu Bakar Sulong, Roslinda Shamsudin, Min Hwei Ng. Prospect of Metal Ceramic (Titanium-Wollastonite) Composite as Permanent Bone Implants: A Narrative Review. Materials 2021; 14(2): 277 doi: 10.3390/ma14020277
|
| 261 |
Zahra Andalibi Fazel, Hassan Elmkhah, Arash Fattah-Alhosseini, Kazem Babaei, Mostafa Meghdari. Comparing electrochemical behavior of applied CrN/TiN nanoscale multilayer and TiN single-layer coatings deposited by CAE-PVD method. Journal of Asian Ceramic Societies 2020; 8(2): 510 doi: 10.1080/21870764.2020.1756065
|
| 262 |
M. Samiee, M. Hanachi, Z.S. Seyedraoufi, M.J. Eshraghi, Y. Shajari. Biodegradable magnesium alloy coated with TiO2/MgO two-layer composite via magnetic sputtering for orthopedic applications: A study on the surface characterization, corrosion, and biocompatibility. Ceramics International 2021; 47(5): 6179 doi: 10.1016/j.ceramint.2020.10.196
|
| 263 |
Abolfazl Anvari Kohestani, Zhiyan Xu, Fatih Erdem Baştan, Aldo R. Boccaccini, Fatemehsadat Pishbin. Electrically conductive coatings in tissue engineering. Acta Biomaterialia 2024; 186: 30 doi: 10.1016/j.actbio.2024.08.007
|
| 264 |
Carmen C. Mayorga-Martinez, Li Zhang, Martin Pumera. Chemical multiscale robotics for bacterial biofilm treatment. Chemical Society Reviews 2024; 53(5): 2284 doi: 10.1039/D3CS00564J
|
| 265 |
Nabaa Sattar Radhi, Awham Jumah Salman, Zainab Al-Khafaji. Investigation of in vitro behavior of composite coating hydroxyapatite-nano silver on 316L stainless steel substrate by electrophoretic technic for biomedical tools. Open Engineering 2024; 14(1) doi: 10.1515/eng-2024-0017
|
| 266 |
Chethan K N, Mohammad Zuber, Shyamasunder Bhat N, Satish Shenoy B, Duncan Shepherd. Optimized trapezoidal-shaped hip implant for total hip arthroplasty using finite element analysis. Cogent Engineering 2020; 7(1): 1719575 doi: 10.1080/23311916.2020.1719575
|
| 267 |
Ildiko Peter. Investigations into Ti-Based Metallic Alloys for Biomedical Purposes. Metals 2021; 11(10): 1626 doi: 10.3390/met11101626
|
| 268 |
Letícia S. De Bortoli, Luciana M. Schabbach, Márcio Celso Fredel, Dachamir Hotza, Bruno Henriques. Ecological footprint of biomaterials for implant dentistry: is the metal-free practice an eco-friendly shift?. Journal of Cleaner Production 2019; 213: 723 doi: 10.1016/j.jclepro.2018.12.189
|
| 269 |
Kundan Kumar, Ashish Das, Shashi Bhushan Prasad. Advances in Engineering Materials. Lecture Notes in Mechanical Engineering 2021; : 557 doi: 10.1007/978-981-33-6029-7_52
|
| 270 |
Sidra Ajmal, Farzan Athar Hashmi, Iffat Imran. Recent progress in development and applications of biomaterials. Materials Today: Proceedings 2022; 62: 385 doi: 10.1016/j.matpr.2022.04.233
|
| 271 |
Jose D. Avila, Zumurda Alrawahi, Susmita Bose, Amit Bandyopadhyay. Additively Manufactured Ti6Al4V-Si-Hydroxyapatite composites for articulating surfaces of load-bearing implants. Additive Manufacturing 2020; 34: 101241 doi: 10.1016/j.addma.2020.101241
|
| 272 |
Marinela Peto, Erick Ramírez-Cedillo, Adriana Hernández, Hector R. Siller. Structural design optimization of knee replacement implants for Additive Manufacturing. Procedia Manufacturing 2019; 34: 574 doi: 10.1016/j.promfg.2019.06.222
|
| 273 |
Bhajneet Singh, Jayant Supale. Additive Manufacturing for Biomedical Applications. Biomedical Materials for Multi-functional Applications 2024; : 259 doi: 10.1007/978-981-97-5456-4_14
|
| 274 |
Vivek Verma, Kaushik Pal. A Finite Element Investigation on the Design of Mechanically Compatible Functionally Graded Orthopaedic Plate for Diaphyseal Tibia Transverse Fracture. Composites Part C: Open Access 2022; 7: 100228 doi: 10.1016/j.jcomc.2022.100228
|
| 275 |
Isabela Evangelista, Dorota Wencel, Steve Beguin, Nan Zhang, Michael D. Gilchrist. Influence of Surface Texturing on the Dry Tribological Properties of Polymers in Medical Devices. Polymers 2023; 15(13): 2858 doi: 10.3390/polym15132858
|
| 276 |
Seyed Aref Hosseini-Faradonbeh, Hamid Reza Katoozian. Biomechanical evaluations of the long-term stability of dental implant using finite element modeling method: a systematic review. The Journal of Advanced Prosthodontics 2022; 14(3): 182 doi: 10.4047/jap.2022.14.3.182
|
| 277 |
Nilesh Tipan, Ajay Pandey, Pushyamitra Mishra. Selection and preparation strategies of Mg-alloys and other biodegradable materials for orthopaedic applications: A review. Materials Today Communications 2022; 31: 103658 doi: 10.1016/j.mtcomm.2022.103658
|
| 278 |
Fatemeh Hafili, Razieh Chaharmahali, Kazem Babaei, Arash Fattah-alhosseini. Duty cycle influence on the corrosion behavior of coatings created by plasma electrolytic oxidation on AZ31B magnesium alloy in simulated body fluid. Corrosion Communications 2021; 3: 62 doi: 10.1016/j.corcom.2021.09.005
|
| 279 |
Sadaqat Ali, Muhammad Irfan, Usama Muhammad Niazi, Ahmad Majdi Abdul Rani, Ahmad Rashedi, Saifur Rahman, Muhammad Kamal Asif Khan, Mabkhoot A. Alsaiari, Stanislaw Legutko, Jana Petrů, Antonin Trefil. Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. Materials 2022; 15(8): 2822 doi: 10.3390/ma15082822
|
| 280 |
Merin Basil, T. Aby Mathew, Riya Sabu, Girish Harikumar. Recent Advances in Implant Biomaterials: A Comprehensive Review. Kerala Dental Journal 2024; 47(3): 99 doi: 10.4103/KSDJ.KSDJ_33_24
|
| 281 |
Wangzhang Chen, Wei Gou, Yageng Li, Xiangmin Li, Meng Li, Jianxin Hou, Xiaotong Zhang, Zhangzhi Shi, Luning Wang. Machine learning design of 400 MPa grade biodegradable Zn-Mn based alloys with appropriate corrosion rates. International Journal of Minerals, Metallurgy and Materials 2024; 31(12): 2727 doi: 10.1007/s12613-024-2995-4
|
| 282 |
Denisa-Alina Draghici, Alina-Andreea Mihai, Mihail-Octavian Aioanei, Nadina-Elena Negru, Adrian-Ionut Nicoara, Sorin-Ion Jinga, Dana Miu, Mihaela Bacalum, Cristina Busuioc. Strontium-Substituted Bioactive Glass-Ceramic Films for Tissue Engineering. Boletín de la Sociedad Española de Cerámica y Vidrio 2022; 61(3): 184 doi: 10.1016/j.bsecv.2020.09.006
|
| 283 |
Nicola De Angelis, Luca Solimei, Claudio Pasquale, Lorenzo Alvito, Alberto Lagazzo, Fabrizio Barberis. Mechanical Properties and Corrosion Resistance of TiAl6V4 Alloy Produced with SLM Technique and Used for Customized Mesh in Bone Augmentations. Applied Sciences 2021; 11(12): 5622 doi: 10.3390/app11125622
|
| 284 |
Dinesh Rokaya, Smriti Bohara, Viritpon Srimaneepong, Suchada Kongkiatkamon, Zohaib Khurshid, Artak Heboyan, Muhammad Sohail Zafar, Janak Sapkota. Functional Biomaterials. 2022; : 503 doi: 10.1007/978-981-16-7152-4_18
|
| 285 |
Nthabiseng Nhlapo, Thywill Cephas Dzogbewu, Olga de Smidt. Nanofiber Polymers for Coating Titanium-Based Biomedical Implants. Fibers 2022; 10(4): 36 doi: 10.3390/fib10040036
|
| 286 |
Neeraj Sharma, Gurpreet Singh, Rakesh Chandmal Sharma, Abhishek Sharma, Kapil Kumar Goyal. Magnesium-Based Nanocomposites: An Overview of Applications and Challenges. Powder Metallurgy and Metal Ceramics 2022; 61(3-4): 205 doi: 10.1007/s11106-022-00307-8
|
| 287 |
Arash Mazinani, Hadi Rastin, Md Julker Nine, James Lee, Alexandra Tikhomirova, Tran Thanh Tung, Reza Ghomashchi, Stephen Kidd, Sarah Vreugde, Dusan Losic. Comparative antibacterial activity of 2D materials coated on porous-titania. Journal of Materials Chemistry B 2021; 9(32): 6412 doi: 10.1039/D1TB01122G
|
| 288 |
Boyu Ma, David A. Cruz Walma, Elie M. Ferneini. Long-Term Survival of Implants Placed in Earlier Failed Implant Sites. Oral and Maxillofacial Surgery Clinics of North America 2025; 37(1): 99 doi: 10.1016/j.coms.2024.08.008
|
| 289 |
Nicole J. Bassous, Christopher L. Jones, Thomas J. Webster. 3-D printed Ti-6Al-4V scaffolds for supporting osteoblast and restricting bacterial functions without using drugs: Predictive equations and experiments. Acta Biomaterialia 2019; 96: 662 doi: 10.1016/j.actbio.2019.06.055
|
| 290 |
María I. Alvarez Echazú, Oriana Perna, Christian E. Olivetti, Pablo E. Antezana, Sofia Municoy, María V. Tuttolomondo, Juan M. Galdopórpora, Gisela S. Alvarez, Daniel G. Olmedo, Martín F. Desimone. Recent Advances in Synthetic and Natural Biomaterials‐Based Therapy for Bone Defects. Macromolecular Bioscience 2022; 22(4) doi: 10.1002/mabi.202100383
|
| 291 |
Mitchell W. Ponsford, Thomas G. H. Diekwisch. Emerging Therapies in Periodontics. 2020; : 113 doi: 10.1007/978-3-030-42990-4_9
|
| 292 |
Manjeet Kumar, Rajesh Kumar, Sandeep Kumar. Coatings on orthopedic implants to overcome present problems and challenges: A focused review. Materials Today: Proceedings 2021; 45: 5269 doi: 10.1016/j.matpr.2021.01.831
|
| 293 |
Kim Tien Nguyen, Ho Yong Kim, Jong-Oh Park, Eunpyo Choi, Chang-Sei Kim. Tripolar Electrode Electrochemical Impedance Spectroscopy for Endoscopic Devices toward Early Colorectal Tumor Detection. ACS Sensors 2022; 7(2): 632 doi: 10.1021/acssensors.1c02571
|
| 294 |
Jia Herh Hong, Fei Yee Yeoh. Mechanical properties and corrosion resistance of cobalt-chrome alloy fabricated using additive manufacturing. Materials Today: Proceedings 2020; 29: 196 doi: 10.1016/j.matpr.2020.05.543
|
| 295 |
Senthil Kumar Venkatraman, Sasikumar Swamiappan. Review on calcium‐ and magnesium‐based silicates for bone tissue engineering applications. Journal of Biomedical Materials Research Part A 2020; 108(7): 1546 doi: 10.1002/jbm.a.36925
|
| 296 |
Tukur Tsauri Bashir, Hussain Zuhailawati, Mohamed Abdel-Hady Gepreel. Evaluation of hardness and elasticity of thermo-mechanically processed low modulus Ti alloys for dental application. Materials Today: Proceedings 2022; 66: 2856 doi: 10.1016/j.matpr.2022.06.529
|
| 297 |
Luciana Calheiros Gomes, Filipe José Mergulhão. SEM Analysis of Surface Impact on Biofilm Antibiotic Treatment. Scanning 2017; 2017: 1 doi: 10.1155/2017/2960194
|
| 298 |
Thiago Gonçalves de Oliveira, Danilo Valim Fagundes, Patrícia Capellato, Daniela Sachs, Antonio Augusto Araújo Pinto da Silva. A Review of Biomaterials Based on High-Entropy Alloys. Metals 2022; 12(11): 1940 doi: 10.3390/met12111940
|
| 299 |
Angelo Accardo, Maurizio Ventre, Ciro Chiappini, Valentina Onesto, Maria Laura Coluccio, Paolo Netti, F. Gentile. Neural Regenerative Nanomedicine. 2020; : 47 doi: 10.1016/B978-0-12-820223-4.00003-6
|
| 300 |
D. L. Alontseva, A. R. Khozhanov, S. S. Gert, A.L. Krasavin, N.V. Prokhorenkova, S. Kalyuzhny. Manufacturing and Characterization of Tantalum Microplasma Coatings for Biomedical Application. 2020 7th International Congress on Energy Fluxes and Radiation Effects (EFRE) 2020; : 813 doi: 10.1109/EFRE47760.2020.9242053
|
| 301 |
Jing Bai, Kristina Haase, Justine J. Roberts, Joseph Hoffmann, Huu Tuan Nguyen, Zhengpeng Wan, Shun Zhang, Bapi Sarker, Nathan Friedman, Čedomila Ristić-Lehmann, Roger D. Kamm. A novel 3D vascular assay for evaluating angiogenesis across porous membranes. Biomaterials 2021; 268: 120592 doi: 10.1016/j.biomaterials.2020.120592
|
| 302 |
Minh Huynh. Permanent Implantable Medical Devices in Exotic Pet Medicine. Veterinary Clinics of North America: Exotic Animal Practice 2019; 22(3): 521 doi: 10.1016/j.cvex.2019.06.004
|
| 303 |
Jiazhen Zhang, Zhizhong Shang, Yanbiao Jiang, Kui Zhang, Xinggang Li, Minglong Ma, Yongjun Li, Bin Ma. Biodegradable metals for bone fracture repair in animal models: a systematic review. Regenerative Biomaterials 2021; 8(1) doi: 10.1093/rb/rbaa047
|
| 304 |
Rashwan Alkentar, Nikolaos Kladovasilakis, Dimitrios Tzetzis, Tamás Mankovits. Effects of Pore Size Parameters of Titanium Additively Manufactured Lattice Structures on the Osseointegration Process in Orthopedic Applications: A Comprehensive Review. Crystals 2023; 13(1): 113 doi: 10.3390/cryst13010113
|
| 305 |
Arbi Aghali, Huseyin E Arman. Photoencapsulated-BMP2 in vIsible Light-Cured Thiol-Acrylate Hydrogels for Craniofacial Bone Tissue Engineering. Regenerative Medicine 2020; 15(9): 2099 doi: 10.2217/rme-2020-0062
|
| 306 |
Nayem Hossain, Md Hosne Mobarak, Md. Aminul Islam, Amran Hossain, Md. Zobair Al Mahmud, Md. Thohid Rayhan, Mohammad Asaduzzaman Chowdhury. Recent development of dental implant materials, synthesis process, and failure – A review. Results in Chemistry 2023; 6: 101136 doi: 10.1016/j.rechem.2023.101136
|
| 307 |
Sai Sreeja S, Rahul Bhandary, Amitha Ramesh, Biju Thomas, Veena Shetty, Geethu Venugopalan, Uday Simha Putta, Bhaskarya Bhaskar Bora, Jayaprakasha Shetty, Mohana Kumar Basavarajappa. Influence of titanium nanoparticles on cytotoxicity and inflammatory cytokines expression in gingival fibroblasts - An in vitro study. F1000Research 2024; 13: 1117 doi: 10.12688/f1000research.150936.1
|
| 308 |
Xirui Xin, Hongqiang Yu, Huixin Lv, Jingyi Ren, Wanqi Yu, Xinxin Ding, Yanmin Zhou, Jinghui Zhao. Developing a New Beta‐Type of Ti–Si/Sn Alloys for Targeted Orthopedic Therapeutics: Assessments of Biological Characteristics. Advanced Engineering Materials 2021; 23(2) doi: 10.1002/adem.202000430
|
| 309 |
Norazlina Mohamed. Functional Bio-based Materials for Regenerative Medicine: From Bench to Bedside (Part 2). 2024; : 172 doi: 10.2174/9789815179330124010014
|
| 310 |
Sachin Solanke, Vivek Gaval. Most commonly used metallic biomaterials for plasma sprayed hydroxyapatite coatings. IOP Conference Series: Materials Science and Engineering 2021; 1168(1): 012013 doi: 10.1088/1757-899X/1168/1/012013
|
| 311 |
Jhoan Toro-Mendoza, Lucia Maio, Marta Gallego, Ferdinand Otto, Florian Schulz, Wolfgang J. Parak, Carlos Sanchez-Cano, Ivan Coluzza. Bioinspired Polyethylene Glycol Coatings for Reduced Nanoparticle–Protein Interactions. ACS Nano 2023; 17(2): 955 doi: 10.1021/acsnano.2c05682
|
| 312 |
Jigar Vyas, Nensi Raytthatha, Sudarshan Singh, Bhupendra G Prajapati, Popat Mohite, Shubham Munde. Sustainable sources of raw materials as substituting biomaterials for additive manufacturing of dental implants: a review. Periodontal and Implant Research 2024; 8(1) doi: 10.1007/s41894-024-00130-x
|
| 313 |
Pearlin Amaan Khan, Ansheed Raheem, Cheirmadurai Kalirajan, Konda Gokuldoss Prashanth, Geetha Manivasagam. In Vivo Assessment of a Triple Periodic Minimal Surface Based Biomimmetic Gyroid as an Implant Material in a Rabbit Tibia Model. ACS Materials Au 2024; 4(5): 479 doi: 10.1021/acsmaterialsau.4c00016
|
| 314 |
Davide Farronato, Leonardo Romano, Gabriele Dani, Giuseppe Messina, Benedetta Miceli, Lorenzo Azzi. A Conservative Technique for Fractured Implant Abutment Screw Retrieval on an Internal Connection Implant: Proof of Concept. Journal of Oral Implantology 2024; 50(5): 519 doi: 10.1563/aaid-joi-D-24-00064
|
| 315 |
Mohammad Hosseini Hooshiar, Asieh Mozaffari, Mareb Hamed Ahmed, Radhwan Abdul Kareem, Athmar Jaber Zrzo, Aseel Salah Mansoor, Zainab H. Athab, Zahra Parhizgar, Parisa Amini. Potential role of metal nanoparticles in treatment of peri-implant mucositis and peri-implantitis. BioMedical Engineering OnLine 2024; 23(1) doi: 10.1186/s12938-024-01294-0
|
| 316 |
Ryan Berthelot, Fabio Variola. Investigating the interplay between environmental conditioning and nanotopographical cueing on the response of human MG63 osteoblastic cells to titanium nanotubes. Biomaterials Science 2024; doi: 10.1039/D4BM00792A
|
| 317 |
Tamer Hamed Hassan, Nabeel Ayappali Kalluvalappil. Allergic reaction of poly‐ether‐ether‐ketone versus titanium implants: A posttest‐only control group design experimental study using a rabbit model. Clinical Implant Dentistry and Related Research 2024; 26(4): 671 doi: 10.1111/cid.13323
|
| 318 |
Sounyala Rayannavar, Sunil Kumar MV, Vignesh Kamath, Mahantesh Bembalgi, Namratha Nayak, Praveen Jodalli. Osseointegrative and antimicrobial properties of graphene oxide nano coated dental implants: A systematic review. F1000Research 2024; 13: 281 doi: 10.12688/f1000research.148180.1
|
| 319 |
Karthik Tappa, Udayabhanu Jammalamadaka, Jeffery A. Weisman, David H. Ballard, Dallas D. Wolford, Cecilia Pascual-Garrido, Larry M. Wolford, Pamela K. Woodard, David K. Mills. 3D Printing Custom Bioactive and Absorbable Surgical Screws, Pins, and Bone Plates for Localized Drug Delivery. Journal of Functional Biomaterials 2019; 10(2): 17 doi: 10.3390/jfb10020017
|
| 320 |
Gilbert Santiago Cañón Bermúdez, Anastasiia Kruv, Tetiana Voitsekhivska, Inga Hochnadel, Ana Lebanov, Andrej Potthoff, Jürgen Fassbender, Tetyana Yevsa, Denys Makarov. Implantable Highly Compliant Devices for Heating of Internal Organs: Toward Cancer Treatment. Advanced Engineering Materials 2019; 21(9) doi: 10.1002/adem.201900407
|
| 321 |
Subrata Mondal, David B. MacManus, Amedeo Franco Bonatti, Carmelo De Maria, Kenny Dalgarno, Maria Chatzinikolaidou, Aurora De Acutis, Giovanni Vozzi, Sonia Fiorilli, Chiara Vitale-Brovarone, Nicholas Dunne. A computational analysis of a novel therapeutic approach combining an advanced medicinal therapeutic device and a fracture fixation assembly for the treatment of osteoporotic fractures: Effects of physiological loading, interface conditions, and fracture fixation materials. Medical Engineering & Physics 2023; 114: 103967 doi: 10.1016/j.medengphy.2023.103967
|
| 322 |
Cesar Colasante, Zachary Sanford, Evan Garfein, Oren Tepper. Current Trends in 3D Printing, Bioprosthetics, and Tissue Engineering in Plastic and Reconstructive Surgery. Current Surgery Reports 2016; 4(2) doi: 10.1007/s40137-016-0127-4
|
| 323 |
Sowmiyadevi Appusamy, Sriram Krishnan, M. Gopikrishna, Sujith Raman. Bio-based Materials for Microwave Devices: A Review. Journal of Electronic Materials 2021; 50(4): 1893 doi: 10.1007/s11664-020-08672-z
|
| 324 |
Feipeng An, Zhengxiong Ma, Kun Sun, Linjie Zhang, Suck Joo Na, Jie Ning, Han Yu. Influences of the Ag content on microstructures and properties of Zn–3Mg–xAg alloy by spark plasma sintering. Journal of Materials Research and Technology 2023; 24: 595 doi: 10.1016/j.jmrt.2023.03.051
|
| 325 |
Sols Miziev, Wiktoria Agata Pawlak, Newton Howard. Comparative analysis of energy transfer mechanisms for neural implants. Frontiers in Neuroscience 2024; 17 doi: 10.3389/fnins.2023.1320441
|
| 326 |
Piotr Kowalczyk, Rafał Podgórski, Michał Wojasiński, Grzegorz Gut, Witold Bojar, Tomasz Ciach. Chitosan-Human Bone Composite Granulates for Guided Bone Regeneration. International Journal of Molecular Sciences 2021; 22(5): 2324 doi: 10.3390/ijms22052324
|
| 327 |
Balakrishnan Abinaya, Tandiakkal Prakash Prasith, Badrinath Ashwin, Syamala Viji Chandran, Nagarajan Selvamurugan. Chitosan in Surface Modification for Bone Tissue Engineering Applications. Biotechnology Journal 2019; 14(12) doi: 10.1002/biot.201900171
|
| 328 |
Rahimeh Rasouli, Ahmed Barhoum, Hasan Uludag. A review of nanostructured surfaces and materials for dental implants: surface coating, patterning and functionalization for improved performance. Biomaterials Science 2018; 6(6): 1312 doi: 10.1039/C8BM00021B
|
| 329 |
Oleksii Popov, Vladimir Vishnyakov, Leigh Fleming, Maxim Podgurskiy, Liam Blunt. Reaction Sintering of Biocompatible Al2O3–hBN Ceramics. ACS Omega 2022; 7(2): 2205 doi: 10.1021/acsomega.1c05749
|
| 330 |
Wai-Ki Wong, Chun-Him Nathanael Lai, Wai-Yin Cheng, Lok-Him Tung, Raymond Chuen-Chung Chang, Franco King-Chi Leung. Polymer–Metal Composite Healthcare Materials: From Nano to Device Scale. Journal of Composites Science 2022; 6(8): 218 doi: 10.3390/jcs6080218
|
| 331 |
Beatriz Garrido, Sergi Dosta, Irene Garcia Cano. Bioactive glass coatings obtained by thermal spray: Current status and future challenges. Boletín de la Sociedad Española de Cerámica y Vidrio 2022; 61(5): 516 doi: 10.1016/j.bsecv.2021.04.001
|
| 332 |
B. Gangadhar, Anbu Ila, Randhir Kumar, Beautlin Ruban, Kurian Punnoose, Shilpa Dandekeri, Suresh J. Babu, C. Swarnalatha, Abhishek S. Nayyar. Strategic implants and bone morphogenic changes: Survival and clinical success in long-term. Journal of Orthodontic Science 2023; 12(1) doi: 10.4103/jos.jos_43_22
|
| 333 |
Aditya Alagatu, Darshan Dhapade, Mayuresh Gajbhiye, Ritik Panjrekar, Ashish Raut. Review of different material and surface modification techniques for dental implants. Materials Today: Proceedings 2022; 60: 2245 doi: 10.1016/j.matpr.2022.03.338
|
| 334 |
Hyunsuk Choi, Min-Ho Hong, Raffaele Sepe. Finite Element Analysis of the Effect of Tightening Torque on the Connection Stability of a Two-Piece Zirconia Implant System. Advances in Materials Science and Engineering 2022; 2022: 1 doi: 10.1155/2022/1456475
|
| 335 |
Daniel J. Modulevsky, Charles M. Cuerrier, Andrew E. Pelling, Feng Zhao. Biocompatibility of Subcutaneously Implanted Plant-Derived Cellulose Biomaterials. PLOS ONE 2016; 11(6): e0157894 doi: 10.1371/journal.pone.0157894
|
| 336 |
Dinesh Rokaya, Viritpon Srimaneepong, Janak Sapkota, Jiaqian Qin, Krisana Siraleartmukul, Vilailuck Siriwongrungson. Polymeric materials and films in dentistry: An overview. Journal of Advanced Research 2018; 14: 25 doi: 10.1016/j.jare.2018.05.001
|
| 337 |
Cigdem Yesildag, Zhenfang Zhang, Fang Ren, Gonzalo de Vicente, Marga C. Lensen. Noble and Precious Metals - Properties, Nanoscale Effects and Applications. 2018; doi: 10.5772/intechopen.71548
|
| 338 |
S. Urbanowski, P. Łuczkiewicz, S. Grymek. Analysis of Bone Wedge Dimensions Selection Methods in High Tibial Osteotomy. Advances in Materials Science 2019; 19(2): 15 doi: 10.2478/adms-2019-0009
|
| 339 |
S. Mohandoss, S. Sureshkumar, L. Renuka. A detailed study on electrochemical performance and cell viability of nano-YSZ-coated 316L SS sample for dental applications. Journal of Materials Research 2021; 36(2): 547 doi: 10.1557/s43578-020-00017-0
|
| 340 |
Marcus Jäger, Herbert Jennissen, Florian Dittrich, Alfons Fischer, Hedda Köhling. Antimicrobial and Osseointegration Properties of Nanostructured Titanium Orthopaedic Implants. Materials 2017; 10(11): 1302 doi: 10.3390/ma10111302
|
| 341 |
Damion T. Dixon, Cheryl T. Gomillion. Conductive Scaffolds for Bone Tissue Engineering: Current State and Future Outlook. Journal of Functional Biomaterials 2021; 13(1): 1 doi: 10.3390/jfb13010001
|
| 342 |
Milena R. Kaluđerović, Stephan Mändl, Hannes Kohlweyer, Hans-Ludwig Graf. Physical vapour deposition of zirconia on titanium: fabrication, characterization and interaction with human osteoblast cells. Journal of Materials Science: Materials in Medicine 2015; 26(12) doi: 10.1007/s10856-015-5602-4
|
| 343 |
Ali Sadrolvaezin, Arezou Pezhman, Iman Zare, Shima Zahed Nasab, Sajad Chamani, Ali Naghizadeh, Ebrahim Mostafavi. Systemic allergic contact dermatitis to palladium, platinum, and titanium: mechanisms, clinical manifestations, prevalence, and therapeutic approaches. MedComm 2023; 4(6) doi: 10.1002/mco2.386
|
| 344 |
Merilin Rosenberg, Krunoslav Ilić, Katre Juganson, Angela Ivask, Merja Ahonen, Ivana Vinković Vrček, Anne Kahru. Potential ecotoxicological effects of antimicrobial surface coatings: a literature survey backed up by analysis of market reports. PeerJ 2019; 7: e6315 doi: 10.7717/peerj.6315
|
| 345 |
Xiangping Hao, Jingzhi Yang, Lei Zhang, Chenhao Ren, Wen Li, Yuntian Lou, Hongchang Qian, Shougang Chen, Dawei Zhang. pH-responsive d-leucine functional multilayer films with antibacterial and anti-adhesion synergistic properties. Materials Today Communications 2021; 28: 102691 doi: 10.1016/j.mtcomm.2021.102691
|
| 346 |
Stefanie Kligman, Zhi Ren, Chun-Hsi Chung, Michael Angelo Perillo, Yu-Cheng Chang, Hyun Koo, Zhong Zheng, Chenshuang Li. The Impact of Dental Implant Surface Modifications on Osseointegration and Biofilm Formation. Journal of Clinical Medicine 2021; 10(8): 1641 doi: 10.3390/jcm10081641
|
| 347 |
Md Manzar Iqbal, Amaresh Kumar, Subhash Singh. Biodegradable composite materials for orthopedic implant: A review. MATERIALS, MECHANICS & MODELING (NCMMM-2020) 2021; 2341: 040031 doi: 10.1063/5.0050142
|
| 348 |
祖敢 覃. 3D Printing in Preparation of Titanium Alloy Artificial Bone. Hans Journal of Biomedicine 2022; 12(03): 229 doi: 10.12677/HJBM.2022.123028
|
| 349 |
Elham Salehi, Nahid Makiabadi, Sajad Keshavarz, Sara Ghanavati, Maziar Khateri, Roya Boudaghi Malidarreh. Determination of mass attenuation coefficient for common prosthetic materials utilizing Monte Carlo simulation, theoretical analysis, and XCOM software. Physica Scripta 2024; 99(12): 125309 doi: 10.1088/1402-4896/ad8fdd
|
| 350 |
Jeffrey Venezuela, Sean Johnston, Matthew S. Dargusch, Andrej Atrens. Metallic Biomaterials Processing and Medical Device Manufacturing. 2020; : 469 doi: 10.1016/B978-0-08-102965-7.00014-X
|
| 351 |
Dakota M. Binkley, Kathryn Grandfield. Advances in Multiscale Characterization Techniques of Bone and Biomaterials Interfaces. ACS Biomaterials Science & Engineering 2018; 4(11): 3678 doi: 10.1021/acsbiomaterials.7b00420
|
| 352 |
Yee Hui Robin Chang, Tiem Leong Yoon, Thong Leng Lim, Moi Hua Tuh. Magnetic resonance imaging (MRI) compatible ZrX (X = Hf, Mo and Ru) alloys with enhanced mechanical properties as alternative biomedical applications. Scripta Materialia 2020; 178: 82 doi: 10.1016/j.scriptamat.2019.11.013
|
| 353 |
M. Martínez-Calderon, R. J. Martín-Palma, A. Rodríguez, M. Gómez-Aranzadi, J. P. García-Ruiz, S. M. Olaizola, M. Manso-Silván. Biomimetic hierarchical micro/nano texturing of TiAlV alloys by femtosecond laser processing for the control of cell adhesion and migration. Physical Review Materials 2020; 4(5) doi: 10.1103/PhysRevMaterials.4.056008
|
| 354 |
Iman Manavitehrani, Ali Fathi, Hesham Badr, Sean Daly, Ali Negahi Shirazi, Fariba Dehghani. Biomedical Applications of Biodegradable Polyesters. Polymers 2016; 8(1): 20 doi: 10.3390/polym8010020
|
| 355 |
Zdenka Fohlerova, Kirill Kamnev, Marcela Sepúlveda, Zdenek Pytlicek, Jan Prasek, Alexander Mozalev. Nanostructured Zirconium‐Oxide Bioceramic Coatings Derived from the Anodized Al/Zr Metal Layers. Advanced Materials Interfaces 2021; 8(14) doi: 10.1002/admi.202100256
|
| 356 |
Thomas Schmiedinger, Stefan Partel, Thomas Lechleitner, Oliver Eiter, Daniel Hekl, Stephan Kaseman, Peter Lukas, Johannes Edlinger, Judith Lechner, Thomas Seppi. Interdigitated aluminium and titanium sensors for assessing epithelial barrier functionality by electric cell-substrate impedance spectroscopy (ECIS). Biomedical Microdevices 2020; 22(2) doi: 10.1007/s10544-020-00486-4
|
| 357 |
Harshika Gautam, Gitanjali Yadav, Rajesh Bansal. Implant surface modification as a basis of osseointegration: A narrative review. Journal of Dentistry Defence Section 2022; 16(2): 139 doi: 10.4103/jodd.jodd_13_21
|
| 358 |
S Tharani Kumar, S Prasanna Devi, Chandrasekaran Krithika, RN Raghavan. Review of metallic biomaterials in dental applications. Journal of Pharmacy And Bioallied Sciences 2020; 12(5): 14 doi: 10.4103/jpbs.JPBS_88_20
|
| 359 |
Shabir Hassan, Marcel Heinrich, Berivan Cecen, Jai Prakash, Yu Shrike Zhang. Biomaterials for Organ and Tissue Regeneration. 2020; : 669 doi: 10.1016/B978-0-08-102906-0.00019-2
|
| 360 |
Ashish Ranjan Sharma, Supriya Jagga, Chiranjib Chakraborty, Sang-Soo Lee. Fibroblast-Like-Synoviocytes Mediate Secretion of Pro-Inflammatory Cytokines via ERK and JNK MAPKs in Ti-Particle-Induced Osteolysis. Materials 2020; 13(16): 3628 doi: 10.3390/ma13163628
|
| 361 |
Mladen Veletić, Ehsanul Hoque Apu, Mitar Simić, Jacob Bergsland, Ilangko Balasingham, Christopher H. Contag, Nureddin Ashammakhi. Implants with Sensing Capabilities. Chemical Reviews 2022; 122(21): 16329 doi: 10.1021/acs.chemrev.2c00005
|
| 362 |
Ahmed Hindy, Farzam Farahmand, Fahimeh sadat Tabatabaei. In vitro biological outcome of laser application for modification or processing of titanium dental implants. Lasers in Medical Science 2017; 32(5): 1197 doi: 10.1007/s10103-017-2217-7
|
| 363 |
Amit Mahajan, Gurpreet Singh, Sandeep Devgan, Sarabjeet Singh Sidhu. EDM performance characteristics and electrochemical corrosion analysis of Co-Cr alloy and duplex stainless steel: A comparative study. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 2021; 235(4): 812 doi: 10.1177/0954408920976739
|
| 364 |
|
| 365 |
Szymon Bajda, Katarzyna Cholewa-Kowalska, Michal Krzyzanowski, Michal Dziadek, Mateusz Kopyscianski, Yijun Liu, Adarsh Rai. Laser-directed energy deposition of bioactive glass on Ti-6Al-7Nb titanium alloy substrate with highly refined grain structure. Surface and Coatings Technology 2024; 485: 130904 doi: 10.1016/j.surfcoat.2024.130904
|
| 366 |
Divya Zindani, Kaushik Kumar, J. Paulo Davim. Mechanical Behaviour of Biomaterials. 2019; : 83 doi: 10.1016/B978-0-08-102174-3.00004-8
|
| 367 |
Francisco Cezar Aquino de Moraes, Lucca Dal Moro, Fernando Rocha Pessoa, Ellen Sabrinna dos Remédios Passos, Raul Antônio Lopes Silva Campos, Dilma do Socorro Moraes de Souza, Danielle Feio, Rommel Mario Rodríguez Burbano, Marianne Rodrigues Fernandes, Ney Pereira Carneiro dos Santos. Malignant Neoplasms Arising in the Cardiac Pacemaker Cavity: A Systematic Review. Cancers 2023; 15(21): 5206 doi: 10.3390/cancers15215206
|
| 368 |
Mihail Mostovei, Oleg Solomon, Nicolae Chele, Cosmin Sinescu, Virgil-Florin Duma, Andrei Mostovei. Electromyographic Evaluation of Muscle Activity in Patients Rehabilitated with Full Arch Fixed Implant-Supported Prostheses. Medicina 2023; 59(2): 299 doi: 10.3390/medicina59020299
|
| 369 |
Sukriti Yadav, Swati Gangwar. A critical evaluation of tribological interaction for restorative materials in dentistry. International Journal of Polymeric Materials and Polymeric Biomaterials 2019; 68(17): 1005 doi: 10.1080/00914037.2018.1525544
|
| 370 |
Balbina Makurat-Kasprolewicz, Agnieszka Ossowska. Recent advances in electrochemically surface treated titanium and its alloys for biomedical applications: A review of anodic and plasma electrolytic oxidation methods. Materials Today Communications 2023; 34: 105425 doi: 10.1016/j.mtcomm.2023.105425
|
| 371 |
Dandan Zhu, Shiwen Hu, Yongfan Fu, Ning Zhao, Dexue Liu. A review of preparation methods, friction and wear, corrosion, and biocompatibility of biomedical high-entropy alloys. Journal of Materials Science 2024; 59(4): 1153 doi: 10.1007/s10853-023-09314-5
|
| 372 |
Mohammed Ahmad Wsoo, Shafinaz Shahir, Siti Pauliena Mohd Bohari, Nadirul Hasraf Mat Nayan, Saiful Izwan Abd Razak. A review on the properties of electrospun cellulose acetate and its application in drug delivery systems: A new perspective. Carbohydrate Research 2020; 491: 107978 doi: 10.1016/j.carres.2020.107978
|
| 373 |
Louisa Z.Y. Huang, Michelle M. Leong, Soroosh Gharehgozlo, Aaron Elbourne, Rachel A. Caruso. Microbes at Bio/Nano Interfaces. Methods in Microbiology 2024; 54: 125 doi: 10.1016/bs.mim.2023.10.004
|
| 374 |
Magdalena Ziąbka, Michał Dziadek, Aleksandra Królicka. Biological and Physicochemical Assessment of Middle Ear Prosthesis. Polymers 2019; 11(1): 79 doi: 10.3390/polym11010079
|
| 375 |
Jaroslav Čapek, Jiří Kubásek, Jan Pinc, Jan Maňák, Orsolya Molnárová, Jan Drahokoupil, Miroslav Čavojský. ZnMg0.8Ca0.2 (wt%) biodegradable alloy – The influence of thermal treatment and extrusion on microstructural and mechanical characteristics. Materials Characterization 2020; 162: 110230 doi: 10.1016/j.matchar.2020.110230
|
| 376 |
Thomas Kreller, Franziska Sahm, Rainer Bader, Aldo R. Boccaccini, Anika Jonitz-Heincke, Rainer Detsch. Biomimetic Calcium Phosphate Coatings for Bioactivation of Titanium Implant Surfaces: Methodological Approach and In Vitro Evaluation of Biocompatibility. Materials 2021; 14(13): 3516 doi: 10.3390/ma14133516
|
| 377 |
Anikeev Sergey, Hodorenko Valentina, Chekalkin Timofey, Gunther Victor, Kang Ji-hoon, Kim Ji-soon. Fabrication and study of double sintered TiNi-based porous alloys. Smart Materials and Structures 2017; 26(5): 057001 doi: 10.1088/1361-665X/aa681a
|
| 378 |
Thiago D. Stocco, Nicole J. Bassous, Siqi Zhao, Alessandro E. C. Granato, Thomas J. Webster, Anderson O. Lobo. Nanofibrous scaffolds for biomedical applications. Nanoscale 2018; 10(26): 12228 doi: 10.1039/C8NR02002G
|
| 379 |
Rakesh Pemmada, Aishwary Shrivastava, Madhusmita Dash, Kuiyan Cui, Prasoon Kumar, Seeram Ramakrishna, Yubin Zhou, Vinoy Thomas, Himansu Sekhar Nanda. Science-based strategies of antibacterial coatings with bactericidal properties for biomedical and healthcare settings. Current Opinion in Biomedical Engineering 2023; 25: 100442 doi: 10.1016/j.cobme.2022.100442
|
| 380 |
Mohamadreza Baghaban-Eslaminejad, Ahmad Oryan, Amir Kamali, Ali Moshiri. Nanostructures for Oral Medicine. 2017; : 777 doi: 10.1016/B978-0-323-47720-8.00026-2
|
| 381 |
Gurmohan Singh, Abhineet Saini, BS Pabla. Development and evaluation of hydroxytite-based anti-microbial surface coatings on polydopamine-treated porous 3D-printed Ti6Al4V alloys for overall biofunctionality. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 2022; doi: 10.1177/09544089221116955
|
| 382 |
Chya-Yan Liaw, Murat Guvendiren. Current and emerging applications of 3D printing in medicine. Biofabrication 2017; 9(2): 024102 doi: 10.1088/1758-5090/aa7279
|
| 383 |
Suchismita Satapathy. Computational Intelligence and Soft Computing Applications in Healthcare Management Science. Advances in Healthcare Information Systems and Administration 2020; : 263 doi: 10.4018/978-1-7998-2581-4.ch012
|
| 384 |
Manjeet Kumar, Rajesh Kumar, Sandeep Kumar, Chander Prakash. Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement. 2021; : 506 doi: 10.4018/978-1-7998-8050-9.ch026
|
| 385 |
Kun Yu, Yilong Dai, Zhongwei Luo, Haitao Long, Min Zeng, Zhaohui Li, Jianxi Zhu, Liang Cheng, Yu Zhang, Hui Liu, Yong Zhu. In vitro and in vivo evaluation of novel biodegradable Mg‐Ag‐Y alloys for use as resorbable bone fixation implant. Journal of Biomedical Materials Research Part A 2018; 106(7): 2059 doi: 10.1002/jbm.a.36397
|
| 386 |
Sadaqat Ali, Muhammad Irfan, Usama Muhammad Niazi, Ahmad Majdi Abdul Rani, Imran Shah, Stanislaw Legutko, Saifur Rahman, Mohammed Jalalah, Mabkhoot A. Alsaiari, Adam Glowacz, Fahad Salem AlKahtani. Synthesis, Surface Nitriding and Characterization of Ti-Nb Modified 316L Stainless Steel Alloy Using Powder Metallurgy. Materials 2021; 14(12): 3270 doi: 10.3390/ma14123270
|
| 387 |
C Panaghie, R Cimpoesu, A Alexandru, M Bernevig, V Manole, A M Roman, B A Prisacariu, P Paraschiv, N Cimpoesu. Chemical and structural analyze of experimental biodegradable ZnMgY alloy. IOP Conference Series: Materials Science and Engineering 2021; 1037(1): 012034 doi: 10.1088/1757-899X/1037/1/012034
|
| 388 |
Nour Mahmoud Eldabah, Sengo Kobayashi, Mohamed Abdel Hady Gepreel. Design and Characterization of New Ti-Zr-Nb-(Mn) Medium Entropy Alloys for Biomedical Applications. Key Engineering Materials 2022; 931: 35 doi: 10.4028/p-84w2s6
|
| 389 |
Gayathree Alagiriswamy, ChitraShankar Krishnan, Hariharan Ramakrishnan, SampathKumar Jayakrishnakumar, Vallabh Mahadevan, NagarasampattiSivaprakasam Azhagarasan. Surface characteristics and bioactivity of zirconia (Y-TZP) with different surface treatments. Journal of Pharmacy And Bioallied Sciences 2020; 12(5): 114 doi: 10.4103/jpbs.JPBS_39_20
|
| 390 |
Rubaiya Anjum, Kei Nishida, Haruka Matsumoto, Daiki Murakami, Shingo Kobayashi, Takahisa Anada, Masaru Tanaka. Attachment and Growth of Fibroblast Cells on Poly (2-Methoxyethyl Acrylate) Analog Polymers as Coating Materials. Coatings 2021; 11(4): 461 doi: 10.3390/coatings11040461
|
| 391 |
José C. C. Paiva, Luís Oliveira, Maria Fátima Vaz, Sofia Costa-de-Oliveira. Biodegradable Bone Implants as a New Hope to Reduce Device-Associated Infections—A Systematic Review. Bioengineering 2022; 9(8): 409 doi: 10.3390/bioengineering9080409
|
| 392 |
Qiyu Qin, Chengshou Zhang, Naiji Yu, Fan Jia, Xin Liu, Qi Zhang, Min Chen, Kaijun Wang. Development and material characteristics of glaucoma surgical implants. Advances in Ophthalmology Practice and Research 2023; 3(4): 171 doi: 10.1016/j.aopr.2023.09.001
|
| 393 |
Alejandro Gomez Sanchez, Evgen Prokhorov, Gabriel Luna-Barcenas, Julia Hernández-Vargas, R. Román-Doval, S. Mendoza, H. Rojas-Chávez. Chitosan-hydroxyapatite-MWCNTs nanocomposite patch for bone tissue engineering applications. Materials Today Communications 2021; 28: 102615 doi: 10.1016/j.mtcomm.2021.102615
|
| 394 |
Nureddin Ashammakhi, Maryam Tavafoghi, Arman Jafari, Sumama Nuthana Kalva, Robin Augustine, Anwarul Hasan, Houman Savoji, Yavuz Nuri Ertas, Song Li. Electrospun Nanofibers. 2022; : 555 doi: 10.1007/978-3-030-99958-2_20
|
| 395 |
B. Garrido, V. Albaladejo-Fuentes, I. G. Cano, S. Dosta. Development of Bioglass/PEEK Composite Coating by Cold Gas Spray for Orthopedic Implants. Journal of Thermal Spray Technology 2022; 31(1-2): 186 doi: 10.1007/s11666-021-01312-w
|
| 396 |
Kristin S. Ødegaard, Jan Torgersen, Christer W. Elverum. Structural and Biomedical Properties of Common Additively Manufactured Biomaterials: A Concise Review. Metals 2020; 10(12): 1677 doi: 10.3390/met10121677
|
| 397 |
D. O. Visscher, A. Gleadall, J. K. Buskermolen, F. Burla, J. Segal, G. H. Koenderink, M. N. Helder, P. P. M. van Zuijlen. Design and fabrication of a hybrid alginate hydrogel/poly(ε‐caprolactone) mold for auricular cartilage reconstruction. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2019; 107(5): 1711 doi: 10.1002/jbm.b.34264
|
| 398 |
Noriko IIJIMA, Shinya HOMMA, Ryotaro NAKANO, Shota HAYASHI, Tomoki HIRANO, Toshihiko IIJIMA, Yasutomo YAJIMA. Fatigue properties of hollow zirconia implants. Dental Materials Journal 2021; 40(4): 885 doi: 10.4012/dmj.2020-248
|
| 399 |
Francesca Accioni, Juan Vázquez, Manuel Merinero, Belén Begines, Ana Alcudia. Latest Trends in Surface Modification for Dental Implantology: Innovative Developments and Analytical Applications. Pharmaceutics 2022; 14(2): 455 doi: 10.3390/pharmaceutics14020455
|
| 400 |
Robert Choe, Abdulrahman A. Balhaddad, John P. Fisher, Mary Anne S. Melo, Huang‐Chiao Huang. Photodynamic Therapy for Biomodulation and Disinfection in Implant Dentistry: Is It Feasible and Effective?. Photochemistry and Photobiology 2021; 97(5): 916 doi: 10.1111/php.13434
|
| 401 |
Anamika Pandey, Ankita Awasthi, Kuldeep K Saxena. Metallic implants with properties and latest production techniques: a review. Advances in Materials and Processing Technologies 2020; 6(2): 405 doi: 10.1080/2374068X.2020.1731236
|
| 402 |
Dhyah Annur, Muhammad Y. Hasbi, Daniel P. Malau, Muhammad S. Utomo, Talitha Asmaria, Djusman Sajuti, Muhamad I. Amal. Preparation and characterization of laterite steel for biomaterial application: A preliminary study. INTERNATIONAL CONFERENCE ON EMERGING APPLICATIONS IN MATERIAL SCIENCE AND TECHNOLOGY: ICEAMST 2020 2020; 2235: 020007 doi: 10.1063/5.0002273
|
| 403 |
Synthesis and Ti-N Sputtering of Zr-Nb Alloys for Dental Implant Material. Journal of Physics: Conference Series 2023; 2556(1): 012024 doi: 10.1088/1742-6596/2556/1/012024
|
| 404 |
Meysam Nasr Azadani, Abolfazl Zahedi, Oluwole Kingsley Bowoto, Bankole Ibrahim Oladapo. A review of current challenges and prospects of magnesium and its alloy for bone implant applications. Progress in Biomaterials 2022; 11(1): 1 doi: 10.1007/s40204-022-00182-x
|
| 405 |
Marcus Bentzen, Juliana Maier, Udo Eckstein, Jianying He, Anja Henss, Neamul Khansur, Julia Glaum. Enhanced grain growth and dielectric properties in aerosol deposited BaTiO3. Journal of the European Ceramic Society 2023; 43(10): 4386 doi: 10.1016/j.jeurceramsoc.2023.03.012
|
| 406 |
Daniel Martinez-Marquez, Ylva Delmar, Shoujin Sun, Rodney A. Stewart. Exploring Macroporosity of Additively Manufactured Titanium Metamaterials for Bone Regeneration with Quality by Design: A Systematic Literature Review. Materials 2020; 13(21): 4794 doi: 10.3390/ma13214794
|
| 407 |
Reka BALINT, Gertrud Alexandra PALTINEAN, Diana Alexandra FLOREA, Gheorghe TOMOAIA, Aurora MOCANU, Maria TOMOAIA-COTISEL. Biomimetic and Antibacterial Composite for Orthopedic Implants. Annals of the Academy of Romanian Scientists Series on Biological Sciences 2022; 11(1): 120 doi: 10.56082/annalsarscibio.2022.1.120
|
| 408 |
Laura Ricciotti, Antonio Apicella, Valeria Perrotta, Raffaella Aversa. Geopolymer Materials for Bone Tissue Applications: Recent Advances and Future Perspectives. Polymers 2023; 15(5): 1087 doi: 10.3390/polym15051087
|
| 409 |
Vipul Saxena, Vijay Kumar, Amrendra Rai, Rishikesh Yadav, Uttam Gupta, Vinay Kumar Singh, Partha Pratim Manna. Optimization of the bio-mechanical properties of Ti–8Si–2Mn alloy by 1393B3 bioactive glass reinforcement. Materials Research Express 2019; 6(7): 075401 doi: 10.1088/2053-1591/ab1280
|
| 410 |
A Rohan, M Baritz. Research on the biomechanical behavior of dental implants. IOP Conference Series: Materials Science and Engineering 2021; 1169(1): 012042 doi: 10.1088/1757-899X/1169/1/012042
|
| 411 |
Chi Xiao, Xin Ying Shi, Wei Ting Yu, Xiao Wei Wei, Liang Liang Cheng, Xing Qiu, Bo Rui Li, De Chao Fan, Jun Lei Li, Xiu Zhi Zhang, De Wei Zhao. In vivo biocompatibility evaluation of Zn-0.05Mg-(0, 0.5, 1wt%)Ag implants in New Zealand rabbits. Materials Science and Engineering: C 2021; 119: 111435 doi: 10.1016/j.msec.2020.111435
|
| 412 |
Bing-Yen Wang, Steven Hsu, Chia-Man Chou, Tair-I Wu, Vincent K. S. Hsiao. Improved Mechanical Properties of Ultra-High Shear Force Mixed Reduced Graphene Oxide/Hydroxyapatite Nanocomposite Produced Using Spark Plasma Sintering. Nanomaterials 2021; 11(4): 986 doi: 10.3390/nano11040986
|
| 413 |
Rayane C. S. Silva, Almerinda Agrelli, Audrey N. Andrade, Carina L. Mendes-Marques, Isabel R. S. Arruda, Luzia R. L. Santos, Niedja F. Vasconcelos, Giovanna Machado. Titanium Dental Implants: An Overview of Applied Nanobiotechnology to Improve Biocompatibility and Prevent Infections. Materials 2022; 15(9): 3150 doi: 10.3390/ma15093150
|
| 414 |
Angaraj Singh, Ashutosh Kumar Dubey. Various Biomaterials and Techniques for Improving Antibacterial Response. ACS Applied Bio Materials 2018; 1(1): 3 doi: 10.1021/acsabm.8b00033
|
| 415 |
Rakesh Kumar, Manoj Kumar, Jasgurpreet Singh Chohan. Investigation of the effect of wear behaviour of 3D printed electric arc sprayed 316L SS coated PLA parts. Materials Today: Proceedings 2023; doi: 10.1016/j.matpr.2023.01.206
|
| 416 |
Doreen Chan, Caitlin L. Maikawa, Andrea I. d'Aquino, Shyam S. Raghavan, Megan L. Troxell, Eric A. Appel. Polyacrylamide‐based hydrogel coatings improve biocompatibility of implanted pump devices. Journal of Biomedical Materials Research Part A 2023; 111(7): 910 doi: 10.1002/jbm.a.37521
|
| 417 |
Sanjeev Kumar Paikra, Samir Bauri, Monalisa Mishra. Fabrication of Nanostructured Surfaces Towards the Prevention of Hospital-Acquired Infection. Journal of Cluster Science 2024; 35(6): 1687 doi: 10.1007/s10876-024-02652-7
|
| 418 |
David Li, Yu-li Wang. Principles of Tissue Engineering. 2020; : 237 doi: 10.1016/B978-0-12-818422-6.00015-0
|
| 419 |
Yixuan Shi, Lijing Yang, Lucai Wang, Qingke Zhang, Xinglong Zhu, Wensheng Sun, Jianwei Shen, Ting Lu, Zhenlun Song, Huinan Liu. Corrosion and Biocompatibility of Pure Zn with a Micro-Arc-Oxidized Layer Coated with Calcium Phosphate. Coatings 2021; 11(11): 1425 doi: 10.3390/coatings11111425
|
| 420 |
Bhanupratap Gaur, Samrat Sagar, Suraj Naik, Nakul Parasharami, Adil Gandevivala, Srivalli Natrajan, Rupesh Ghyar, Ravi Bhallamudi. 3D Printing in Oral Health Science. 2022; : 233 doi: 10.1007/978-3-031-07369-4_11
|
| 421 |
Minxun Lu, Hongjie Chen, Bo Yuan, Yong Zhou, Li Min, Zhanwen Xiao, Xiangdong Zhu, Chongqi Tu, Xingdong Zhang. <p>Electrochemical Deposition of Nanostructured Hydroxyapatite Coating on Titanium with Enhanced Early Stage Osteogenic Activity and Osseointegration</p>. International Journal of Nanomedicine 2020; : 6605 doi: 10.2147/IJN.S268372
|
| 422 |
Xi Hu, Teng Wang, Faqi Li, Xiang Mao. Surface modifications of biomaterials in different applied fields. RSC Advances 2023; 13(30): 20495 doi: 10.1039/D3RA02248J
|
| 423 |
Vipul Saxena, Vijay Kumar, Angaraj Singh, Vinay Kumar Singh. Effect of reinforcing S53P4 bioactive glass on physio-mechanical and biological properties of Ti –8Nb–2Fe alloy. Ceramics International 2019; 45(17): 21810 doi: 10.1016/j.ceramint.2019.07.184
|
| 424 |
Lia Stanciu, Susana Diaz-Amaya. Introductory Biomaterials. 2022; : 31 doi: 10.1016/B978-0-12-809263-7.00003-2
|
| 425 |
Amirreza Hendi, Sobhan Mirzaee, Mehran Falahchai. The effect of different implant‐abutment types and heights on screw loosening in cases with increased crown height space. Clinical and Experimental Dental Research 2024; 10(3) doi: 10.1002/cre2.894
|
| 426 |
Optimization total deformation of knee implants made Ti6Al4V material. MATEC Web of Conferences 2018; 204: 07014 doi: 10.1051/matecconf/201820407014
|
| 427 |
A. A. Kulakov, A. S. Kasparov, D. A. Porfenchuk. Factors affecting osteointegration and the use of early functional load to reduce the duration of treatment in dental implantation. Stomatologiya 2019; 98(4): 107 doi: 10.17116/stomat201998041107
|
| 428 |
Ayomiposi M Loye, Hyuk-Kwon Kwon, David Dellal, Rodrigo Ojeda, Sangmin Lee, Rose Davis, Natalie Nagle, Panagiotis G Doukas, Jan Schroers, Francis Y Lee, Themis R Kyriakides. Biocompatibility of platinum-based bulk metallic glass in orthopedic applications . Biomedical Materials 2021; 16(4): 045018 doi: 10.1088/1748-605X/abf981
|
| 429 |
L. Minati, C. Migliaresi, L. Lunelli, G. Viero, M. Dalla Serra, G. Speranza. Plasma assisted surface treatments of biomaterials. Biophysical Chemistry 2017; 229: 151 doi: 10.1016/j.bpc.2017.07.003
|
| 430 |
Nono Darsono, Murni Handayani, Franciska Pramuji Lestari, Aprilia Erryani, I Nyoman Gede Putrayasa, Yudi Nugraha Thaha, Yohanes Imron Sihaloho, Hadi Sutanto. Effect of Multiwalled Carbon Nanotubes (MWCNTs) on the Micro-Hardness and Corrosion Behaviour Mg-Zn Alloy Prepared by Powder Metallurgy. Materials Science Forum 2020; 1000: 115 doi: 10.4028/www.scientific.net/MSF.1000.115
|
| 431 |
Alexandra Arteaga, Dineli T. S. Ranathunga, Jiayi Qu, Claudia C. Biguetti, Steven O. Nielsen, Danieli C. Rodrigues. Exogenous Protein Delivery of Ionic Liquid-Mediated HMGB1 Coating on Titanium Implants. Langmuir 2023; 39(6): 2204 doi: 10.1021/acs.langmuir.2c02688
|
| 432 |
Kacper Przykaza, Małgorzata Jurak, Grzegorz Kalisz, Robert Mroczka, Agnieszka Ewa Wiącek. Characteristics of Hybrid Bioglass-Chitosan Coatings on the Plasma Activated PEEK Polymer. Molecules 2023; 28(4): 1729 doi: 10.3390/molecules28041729
|
| 433 |
Georgiana Dolete, Cristina Florina Ilie, Irina Florentina Nicoară, George Mihail Vlăsceanu, Alexandru Mihai Grumezescu. Nanobiomaterials in Dentistry. 2016; : 27 doi: 10.1016/B978-0-323-42867-5.00002-3
|
| 434 |
Khurram Munir, Arne Biesiekierski, Cuie Wen, Yuncang Li. Metallic Biomaterials Processing and Medical Device Manufacturing. 2020; : 3 doi: 10.1016/B978-0-08-102965-7.00001-1
|
| 435 |
J. Ballarre, T. Aydemir, L. Liverani, J.A. Roether, W.H. Goldmann, A.R. Boccaccini. Versatile bioactive and antibacterial coating system based on silica, gentamicin, and chitosan: Improving early stage performance of titanium implants. Surface and Coatings Technology 2020; 381: 125138 doi: 10.1016/j.surfcoat.2019.125138
|
| 436 |
A. Sasireka, Renji Rajendran, V. Raj. In vitro corrosion resistance and cytocompatibility of minerals substituted apatite/biopolymers duplex coatings on anodized Ti for orthopedic implant applications. Arabian Journal of Chemistry 2020; 13(8): 6312 doi: 10.1016/j.arabjc.2020.05.031
|
| 437 |
Ines Schoberleitner, Leoni Baier, Michaela Lackner, Lisa-Maria Zenz, Débora C. Coraça-Huber, Wendy Ullmer, Annabelle Damerum, Klaus Faserl, Stephan Sigl, Theresia Steinkellner, Selina Winkelmann, Bettina Sarg, Daniel Egle, Christine Brunner, Dolores Wolfram. Surface Topography, Microbial Adhesion, and Immune Responses in Silicone Mammary Implant-Associated Capsular Fibrosis. International Journal of Molecular Sciences 2024; 25(6): 3163 doi: 10.3390/ijms25063163
|
| 438 |
Jeimmy González-Masís, Jorge M. Cubero-Sesin, Alexánder Campos-Quirós, Kaveh Edalati. Synthesis of biocompatible high-entropy alloy TiNbZrTaHf by high-pressure torsion. Materials Science and Engineering: A 2021; 825: 141869 doi: 10.1016/j.msea.2021.141869
|
| 439 |
John Daniel Arputharaj, Shahrooz Nafisi, Reza Ghomashchi. Additive manufacturing of continuous wave and pulsed wave L-PBF Ti64 thin cross sections. Progress in Additive Manufacturing 2024; doi: 10.1007/s40964-024-00804-9
|
| 440 |
Chiang Liang Kok, Chee Kit Ho, Hong Wei Ng, Yit Yan Koh, Tee Hui Teo. Optimizing Sustainable Thread Design for Motorized Leg-Lengthening Devices: A Structural and Performance Assessment. Applied Sciences 2024; 14(16): 7296 doi: 10.3390/app14167296
|
| 441 |
Manjeet Kumar, Rajesh Kumar, Sandeep Kumar, Chander Prakash. Handbook of Research on Green Engineering Techniques for Modern Manufacturing. Advances in Mechatronics and Mechanical Engineering 2019; : 1 doi: 10.4018/978-1-5225-5445-5.ch001
|
| 442 |
A. M. Fathi, O. S. Shehata, A. M. Abdel-Karim. The Photoactivity and Electrochemical Behavior of Porous Titania (TiO2) in Simulated Saliva for Dental Implant Application. Silicon 2019; 11(5): 2353 doi: 10.1007/s12633-018-9813-4
|
| 443 |
Xiao Peng Zhang, Yu Ting He, Wen Xuan Li, Bo Zhi Chen, Can Yang Zhang, Yong Cui, Xin Dong Guo. An update on biomaterials as microneedle matrixes for biomedical applications. Journal of Materials Chemistry B 2022; 10(32): 6059 doi: 10.1039/D2TB00905F
|
| 444 |
Przemysław Jurczak, Julia Witkowska, Sylwia Rodziewicz-Motowidło, Sławomir Lach. Proteins, peptides and peptidomimetics as active agents in implant surface functionalization. Advances in Colloid and Interface Science 2020; 276: 102083 doi: 10.1016/j.cis.2019.102083
|
| 445 |
Siddharth Srivastava, Aanchna Sharma, Vinod Kushvaha. Additive and Subtractive Manufacturing of Composites. Springer Series in Advanced Manufacturing 2021; : 201 doi: 10.1007/978-981-16-3184-9_8
|
| 446 |
Himanshu Bisaria, Bharat Bhusan Patra, Smita Mohanty. Surface modification during hydroxyapatite powder mixed electric discharge machining of metallic biomaterials: a review. Surface Engineering 2022; 38(7-9): 680 doi: 10.1080/02670844.2022.2155406
|
| 447 |
Marinela Peto, Josué García-Ávila, Ciro A. Rodriguez, Héctor R. Siller, Jorge Vicente Lopes da Silva, Erick Ramírez-Cedillo. Review on structural optimization techniques for additively manufactured implantable medical devices. Frontiers in Mechanical Engineering 2024; 10 doi: 10.3389/fmech.2024.1353108
|
| 448 |
Ala'a Al Otaibi, El‐Sayed M. Sherif, Mohammed Q. Al‐Rifaiy, Spiros Zinelis, Youssef S. Al Jabbari. Corrosion resistance of coupled sandblasted, large‐grit, acid‐etched (SLA) and anodized Ti implant surfaces in synthetic saliva. Clinical and Experimental Dental Research 2019; 5(5): 452 doi: 10.1002/cre2.198
|
| 449 |
Mallikarjun B. Jalageri, G. C. Mohan Kumar. Processing and Fabrication of Advanced Materials, Volume 1. Springer Proceedings in Materials 2024; 52: 153 doi: 10.1007/978-981-97-5959-0_10
|
| 450 |
Gouthamaraj Kanapaakala, S Venkatesan. A review on various phases and alloy design methods of β-Ti alloys for biomedical applications. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2023; 237(7): 1497 doi: 10.1177/14644207231152067
|
| 451 |
Suman Kumari, Hanuma Reddy Tiyyagura, Yasir Beeran Pottathara, Kishor Kumar Sadasivuni, Deepalekshmi Ponnamma, Timothy E.L. Douglas, Andre G. Skirtach, M.K. Mohan. Surface functionalization of chitosan as a coating material for orthopaedic applications: A comprehensive review. Carbohydrate Polymers 2021; 255: 117487 doi: 10.1016/j.carbpol.2020.117487
|
| 452 |
Drug loaded bioglass nanoparticles and their coating for efficient tissue and bone regeneration. Journal of Non-Crystalline Solids 2023; 616: 122469 doi: 10.1016/j.jnoncrysol.2023.122469
|
| 453 |
MD Bindu, PC Shamla, AU Anooja, L Rekha, KK Ramachandran. Microstructure, mechanical and tribological characteristics of AZ91D-HAp-TiB2 hybrid nanocomposites synthesized through the stir casting route. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 2024; doi: 10.1177/09544089241265898
|
| 454 |
Tomoyuki Fujii, Keiichiro Tohgo, Masahiro Iwao, Yoshinobu Shimamura. Fabrication of alumina-titanium composites by spark plasma sintering and their mechanical properties. Journal of Alloys and Compounds 2018; 744: 759 doi: 10.1016/j.jallcom.2018.02.142
|
| 455 |
Przemysław Gnatowski, Karolina Gwizdała, Agnieszka Kurdyn, Andrzej Skorek, Ewa Augustin, Justyna Kucińska-Lipka. Investigation on Filaments for 3D Printing of Nasal Septum Cartilage Implant. Materials 2023; 16(9): 3534 doi: 10.3390/ma16093534
|
| 456 |
Ahmet Engin Pazarçeviren, Ayşen Tezcaner, Zafer Evis. Multifunctional natural polymer-based metallic implant surface modifications. Biointerphases 2021; 16(2) doi: 10.1116/6.0000876
|
| 457 |
Angaraj Singh, Ashutosh Kumar Dubey. Improved antibacterial and cellular response of electrets and piezobioceramics. Journal of Biomaterials Applications 2021; 36(3): 441 doi: 10.1177/0885328221991965
|
| 458 |
Andisheh Motealleh, Pooya Dorri, Nermin S Kehr. Injectable polymer/nanomaterial composites for the fabrication of three-dimensional biomaterial scaffolds. Biomedical Materials 2020; 15(4): 045021 doi: 10.1088/1748-605X/ab82ea
|
| 459 |
Shrikaant Kulkarni. Non-Thermal Plasma Technology for Polymeric Materials. 2019; : 67 doi: 10.1016/B978-0-12-813152-7.00003-2
|
| 460 |
Cosmin Cosma, Julia Kessler, Andreas Gebhardt, Ian Campbell, Nicolae Balc. Improving the Mechanical Strength of Dental Applications and Lattice Structures SLM Processed. Materials 2020; 13(4): 905 doi: 10.3390/ma13040905
|
| 461 |
Parul Yadav, Rahul Shah, Anindo Roy, Sibani Jani, Kaushik Chatterjee, Deepak Kumar Saini. Cellular Senescence Program is Sensitive to Physical Differences in Polymeric Tissue Scaffolds. ACS Materials Au 2024; 4(1): 35 doi: 10.1021/acsmaterialsau.3c00057
|
| 462 |
Saeid Alipour, Shirin Nour, Seyyed Morteza Attari, Mohammad Mohajeri, Sogol Kianersi, Farzaneh Taromian, Mohammadparsa Khalkhali, George E. Aninwene, Lobat Tayebi. A review onin vitro/in vivoresponse of additively manufactured Ti–6Al–4V alloy. Journal of Materials Chemistry B 2022; 10(46): 9479 doi: 10.1039/D2TB01616H
|
| 463 |
Ane Escobar, Nicolás E. Muzzio, Ángel M. Martínez-Villacorta, Ander Abarrategi, Elisa Bindini, Marek Grzelczak, Andrea V. Bordoni, Paula C. Angelomé, Sergio E. Moya. Mesoporous titania coatings with carboxylated pores for complexation and slow delivery of strontium for osteogenic induction. Applied Surface Science 2020; 510: 145172 doi: 10.1016/j.apsusc.2019.145172
|
| 464 |
Tomas Sabirovas, Aušra Valiūnienė, Inga Gabriunaite, Gintaras Valincius. Mixed hybrid bilayer lipid membranes on mechanically polished titanium surface. Biochimica et Biophysica Acta (BBA) - Biomembranes 2020; 1862(6): 183232 doi: 10.1016/j.bbamem.2020.183232
|
| 465 |
Riya Shivgotra, Bindu Soni, Manjot Kaur, Shubham Thakur. Engineered Biomaterials. Engineering Materials 2023; : 281 doi: 10.1007/978-981-99-6698-1_10
|
| 466 |
Effect of Yttrium on corrosion resistance of Zr-based alloys in Ringer's lactate solution for biomaterial applications. AIMS Materials Science 2024; 11(3): 565 doi: 10.3934/matersci.2024028
|
| 467 |
Chitrali Talele, Dipali Talele, Chintan Aundhia, Niyati Shah, Mamta Kumari, Piyushkumar Sadhu. Medical Applications for Biocompatible Surfaces and Coatings. 2024; : 20 doi: 10.1039/9781837675555-00020
|
| 468 |
Joy-anne N. Oliver, Yingchao Su, Xiaonan Lu, Po-Hsuen Kuo, Jincheng Du, Donghui Zhu. Bioactive glass coatings on metallic implants for biomedical applications. Bioactive Materials 2019; 4: 261 doi: 10.1016/j.bioactmat.2019.09.002
|
| 469 |
Madhuri Pradhan, Suchismita Satapathy, B. B. Nayak. Global Developments in Healthcare and Medical Tourism. Advances in Hospitality, Tourism, and the Services Industry 2020; : 38 doi: 10.4018/978-1-5225-9787-2.ch003
|
| 470 |
Sharafadeen Kunle Kolawole, Wang Hai, Shuyuan Zhang, Ziqing Sun, Muhammad Ali Siddiqui, Ihsan Ullah, Wei Song, Frank Witte, Ke Yang. Preliminary study of microstructure, mechanical properties and corrosion resistance of antibacterial Ti-15Zr-xCu alloy for dental application. Journal of Materials Science & Technology 2020; 50: 31 doi: 10.1016/j.jmst.2020.03.003
|
| 471 |
Tim B. Hunter, Pablo Gurman. Radiologic Guide to Orthopedic Devices. 2017; : 7 doi: 10.1017/9781316084304.003
|
| 472 |
Tilottoma Saha, Fahmida Gulshan, Syed Ansar Md. Tofail. Accelerated corrosion of zinc, erbium and cerium co-doped Mg-alloys prepared by spark plasma sintering for bioresorbable implant applications. Materials Today Communications 2023; 37: 107350 doi: 10.1016/j.mtcomm.2023.107350
|
| 473 |
A.I. Costa, F. Viana, F. Toptan. Preliminary tribocorrosion evaluation of bio-functionalized Ti doped with Ca-P-Sr. Materials Letters 2021; 283: 128775 doi: 10.1016/j.matlet.2020.128775
|
| 474 |
Haden A. Johnson, Darby Donaho, Aya Ali, Amisha Parekh, Randall S. Williamson, Mary E. Marquart, Joel D. Bumgardner, Amol V. Janorkar, Michael D. Roach. Photocatalytic Activity and Antibacterial Properties of Mixed-Phase Oxides on Titanium Implant Alloy Substrates. Coatings 2024; 14(5): 595 doi: 10.3390/coatings14050595
|
| 475 |
Ammarueda Issariyapat, Abdollah Bahador, Patama Visuttipitukul, Shufeng Li, Junko Umeda, Katsuyoshi Kondoh. Strengthening and deformation mechanism of selective laser-melted high-concentration nitrogen solute α-Ti materials with heterogeneous microstructures via heat treatment. Materials Science and Engineering: A 2021; 826: 141935 doi: 10.1016/j.msea.2021.141935
|
| 476 |
Muhammad Usama Saeed, Nazim Hussain, Muhammad Bilal. Functional Biomaterials. 2022; : 129 doi: 10.1007/978-981-16-7152-4_5
|
| 477 |
Jian Wang, Jiajin Yu, In-Ho Jung. Influence of Sr and Mn Elements on the Microstructural Characteristics, Mechanical, and Anticorrosion Properties of Zn‐Based Biodegradable Materials. Advanced Engineering Materials 2023; 25(21) doi: 10.1002/adem.202300834
|
| 478 |
Anjali Upadhyay, Lipi Pradhan, Devyani Yenurkar, Kundan Kumar, Sudip Mukherjee. Advancement in ceramic biomaterials for dental implants. International Journal of Applied Ceramic Technology 2024; 21(4): 2796 doi: 10.1111/ijac.14772
|
| 479 |
Mariana Brito da Cruz, Joana Faria Marques, Gabriella M. Peñarrieta-Juanito, Mafalda Costa, Júlio C. M. Souza, Ricardo S. Magini, Georgina Miranda, Filipe Samuel Silva, João Manuel Mendez Caramês, António Duarte Sola Pereira da Mata. Bioactive-Enhanced Polyetheretherketone Dental Implant Materials: Mechanical Characterization and Cellular Responses. Journal of Oral Implantology 2021; 47(1): 9 doi: 10.1563/aaid-joi-D-19-00172
|
| 480 |
Niels P. J. de Graaf, Albert J. Feilzer, Cees J. Kleverlaan, Hetty Bontkes, Sue Gibbs, Thomas Rustemeyer. A retrospective study on titanium sensitivity: Patch test materials and manifestations. Contact Dermatitis 2018; 79(2): 85 doi: 10.1111/cod.13010
|
| 481 |
M. Gueye, S. Ammar-Merah, S. Nowak, P. Decorse, A. Chevillot-Biraud, L. Perrière, J.P. Couzinie, I. Guillot, G. Dirras. Study of the stability under in vitro physiological conditions of surface silanized equimolar HfNbTaTiZr high-entropy alloy: A first step toward bio-implant applications. Surface and Coatings Technology 2020; 385: 125374 doi: 10.1016/j.surfcoat.2020.125374
|
| 482 |
Muataz A. Osman, Evgeny Kushnerev, Rasha A. Alamoush, Kevin. G. Seymour, Julian M. Yates. Two Gingival Cell Lines Response to Different Dental Implant Abutment Materials: An In Vitro Study. Dentistry Journal 2022; 10(10): 192 doi: 10.3390/dj10100192
|
| 483 |
Anjaneyulu Udduttula, Jian Li, Zhen Ma, Bin Teng, Jian V. Zhang, Ana M. Ferreira, Piergiorgio Gentile, Guocheng Wang, Xiaobing Zhao, Pei-Gen Ren. A novel apatite-inspired Sr5(PO4)2SiO4 plasma-sprayed coating on Ti alloy promoting biomineralization, osteogenesis and angiogenesis. Ceramics International 2022; 48(8): 10979 doi: 10.1016/j.ceramint.2021.12.317
|
| 484 |
Xiaowei Bai, Ji Li, Zhidong Zhao, Qi Wang, Ningyu Lv, Yuxing Wang, Huayi Gao, Zheng Guo, Zhongli Li. In vivo evaluation of osseointegration ability of sintered bionic trabecular porous titanium alloy as artificial hip prosthesis. Frontiers in Bioengineering and Biotechnology 2022; 10 doi: 10.3389/fbioe.2022.928216
|
| 485 |
Kun Jiang, Xueyu Wen, Torbjörn Pettersson, Thomas Crouzier. Engineering Surfaces with Immune Modulating Properties of Mucin Hydrogels. ACS Applied Materials & Interfaces 2022; 14(35): 39727 doi: 10.1021/acsami.1c19250
|
| 486 |
Sounyala Rayannavar, Sunil Kumar MV, Vignesh Kamath, Mahantesh Bembalgi, Namratha Nayak, Praveen Jodalli. Osseointegrative and antimicrobial properties of graphene oxide nano coated dental implants: A systematic review. F1000Research 2024; 13: 281 doi: 10.12688/f1000research.148180.2
|
| 487 |
P Hauschwitz, M Klicova, S Mullerova, R Bicistova, M Prochazka, J Brajer, M Chyla, M Smrž, J Chvojka, T Mocek. Advanced micro- & nanostructuring for enhanced biocompatibility of stainless steel by multi-beam and beamshaping technology. Biomedical Materials 2023; 18(4): 045008 doi: 10.1088/1748-605X/acd291
|
| 488 |
Tomoyo Manaka, Yusuke Tsutsumi, Peng Chen, Maki Ashida, Hideki Katayama, Takao Hanawa. Development of Electrochemical Surface Treatment to Visualize Critical Corrosion-Inducing Inclusions of Zr in Chloride Environments. Journal of The Electrochemical Society 2021; 168(12): 121505 doi: 10.1149/1945-7111/ac3ff1
|
| 489 |
Remigiusz M. Grzeskowiak, Jim Schumacher, Madhu S. Dhar, David P. Harper, Pierre-Yves Mulon, David E. Anderson. Bone and Cartilage Interfaces With Orthopedic Implants: A Literature Review. Frontiers in Surgery 2020; 7 doi: 10.3389/fsurg.2020.601244
|
| 490 |
Mahtab Asadian, Iuliia Onyshchenko, Ke Vin Chan, Pieter Cools, Selin Tas, Heidi Declercq, Rino Morent, Nathalie De Geyter. Development of 1-propanethiol-based thiol-rich plasma polymerized coatings using a medium pressure dielectric barrier discharge. Applied Surface Science 2019; 495: 143484 doi: 10.1016/j.apsusc.2019.07.226
|
| 491 |
Ayda Khosravanihaghighi, Pramod Koshy, Ghazaleh Bahmanrokh, Charles Christopher Sorrell. Solid solubility and charge compensation/exchange mechanisms in Ga- or Mn-Doped CeO2 thin films on 3D printed biomedical titanium alloy. Materials Chemistry and Physics 2022; 277: 125483 doi: 10.1016/j.matchemphys.2021.125483
|
| 492 |
Gopathy Sridevi, Seshadri Srividya. Current Concepts in Dental Implantology - From Science to Clinical Research. Dentistry 2022; 11 doi: 10.5772/intechopen.101489
|
| 493 |
Doaa Felemban, Rinus G Verdonschot, Yuri Iwamoto, Yuka Uchiyama, Naoya Kakimoto, Sven Kreiborg, Shumei Murakami. A quantitative experimental phantom study on MRI image uniformity. Dentomaxillofacial Radiology 2018; 47(6): 20180077 doi: 10.1259/dmfr.20180077
|
| 494 |
Syed Hammad Mian, Khaja Moiduddin, Basem M. A. Abdo, Abdul Sayeed, Hisham Alkhalefah. Modelling and evaluation of meshed implant for cranial reconstruction. The International Journal of Advanced Manufacturing Technology 2022; 118(5-6): 1967 doi: 10.1007/s00170-021-08161-5
|
| 495 |
Michael Ghosh, Hanna Hartmann, Meike Jakobi, Léo März, Leon Bichmann, Lena K. Freudenmann, Lena Mühlenbruch, Sören Segan, Hans-Georg Rammensee, Nicole Schneiderhan-Marra, Christopher Shipp, Stefan Stevanović, Thomas O. Joos. The Impact of Biomaterial Cell Contact on the Immunopeptidome. Frontiers in Bioengineering and Biotechnology 2020; 8 doi: 10.3389/fbioe.2020.571294
|
| 496 |
Agustin Wulan Suci Dharmayanti, Rajni Dubey, Navneet Kumar Dubey, Win-Ping Deng. Biopolymer-Based Formulations. 2020; : 647 doi: 10.1016/B978-0-12-816897-4.00026-6
|
| 497 |
Rakesh Kumar, Anupam Agrawal. Additive Manufacturing of Bio-implants. Biomedical Materials for Multi-functional Applications 2024; : 137 doi: 10.1007/978-981-99-6972-2_9
|
| 498 |
Ansheed A. Raheem, Pearlin Hameed, Ruban Whenish, Renold S. Elsen, Aswin G, Amit Kumar Jaiswal, Konda Gokuldoss Prashanth, Geetha Manivasagam. A Review on Development of Bio-Inspired Implants Using 3D Printing. Biomimetics 2021; 6(4): 65 doi: 10.3390/biomimetics6040065
|
| 499 |
Preeti Chauhan, M. A. Saloda, B. P. Nandwana, S. Jindal. Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020). Lecture Notes on Multidisciplinary Industrial Engineering 2022; : 215 doi: 10.1007/978-3-030-73495-4_15
|
| 500 |
Farzad Soleymani, Rahmatollah Emadi, Sorour Sadeghzade, Fariborz Tavangarian. Applying Baghdadite/PCL/Chitosan Nanocomposite Coating on AZ91 Magnesium Alloy to Improve Corrosion Behavior, Bioactivity, and Biodegradability. Coatings 2019; 9(12): 789 doi: 10.3390/coatings9120789
|
| 501 |
Akula Siva Bhaskar, Akhtar Khan. Comparative analysis of hybrid MCDM methods in material selection for dental applications. Expert Systems with Applications 2022; 209: 118268 doi: 10.1016/j.eswa.2022.118268
|
| 502 |
Laila Damiati, Marcus G Eales, Angela H Nobbs, Bo Su, Penelope M Tsimbouri, Manuel Salmeron-Sanchez, Matthew J Dalby. Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants. Journal of Tissue Engineering 2018; 9 doi: 10.1177/2041731418790694
|
| 503 |
Arash Fattah-alhosseini, Kazem Babaei, Maryam Molaei. Plasma electrolytic oxidation (PEO) treatment of zinc and its alloys: A review. Surfaces and Interfaces 2020; 18: 100441 doi: 10.1016/j.surfin.2020.100441
|
| 504 |
Hiroaki Shimamoto, Doaa Felemban, Yuka Uchimoto, Nobuhiko Matsuda, Naoko Takagawa, Ami Takeshita, Yuri Iwamoto, Ryoko Okahata, Tomomi Tsujimoto, Sven Kreiborg, Sanjay M. Mallya, Fan-pei Gloria Yang. Effect of metallic materials on magnetic resonance image uniformity: a quantitative experimental study. Oral Radiology 2024; doi: 10.1007/s11282-024-00778-y
|
| 505 |
Yomna H. Shash, Mohamed T. El-Wakad, Mohamed A. A. Eldosoky, Mohamed M. Dohiem. Evaluation of stress and strain on mandible caused using “All-on-Four” system from PEEK in hybrid prosthesis: finite-element analysis. Odontology 2023; 111(3): 618 doi: 10.1007/s10266-022-00771-z
|
| 506 |
Meriem Amine, Wiam Merdma, Khalid El Boussiri, Luca Testarelli. Electrogalvanism in Oral Implantology: A Systematic Review. International Journal of Dentistry 2022; 2022: 1 doi: 10.1155/2022/4575416
|
| 507 |
Nidhal Sahib Mansoor, Arash Fattah-alhosseini, Hassan Elmkhah, Arash Shishehian. Assessment of Ion Release for Ni-Cr Dental Alloy with Monolithic and Multilayer Coatings in Different pH Level. Surfaces and Interfaces 2021; 22: 100904 doi: 10.1016/j.surfin.2020.100904
|
| 508 |
Mohammad Shahin, Cuie Wen, Khurram Munir, Yuncang Li. Mechanical and corrosion properties of graphene nanoplatelet–reinforced Mg–Zr and Mg–Zr–Zn matrix nanocomposites for biomedical applications. Journal of Magnesium and Alloys 2022; 10(2): 458 doi: 10.1016/j.jma.2021.05.011
|
| 509 |
Sumanth Ratna Kandavalli, Sunanda Ratna Kandavalli, Rajesh S. Ruban, Chih Hung Lo, Ravinder Kumar, Abou Bakr Elshalakany, Catalin I. Pruncu. Review—A Conceptual Analysis on Ceramic Materials Used for Dental Practices: Manufacturing Techniques and Microstructure. ECS Journal of Solid State Science and Technology 2022; 11(5): 053005 doi: 10.1149/2162-8777/ac6113
|
| 510 |
Jafar Hasan, Richard Bright, Andrew Hayles, Dennis Palms, Peter Zilm, Dan Barker, Krasimir Vasilev. Preventing Peri-implantitis: The Quest for a Next Generation of Titanium Dental Implants. ACS Biomaterials Science & Engineering 2022; 8(11): 4697 doi: 10.1021/acsbiomaterials.2c00540
|
| 511 |
Claire Yu, Jacob Schimelman, Pengrui Wang, Kathleen L. Miller, Xuanyi Ma, Shangting You, Jiaao Guan, Bingjie Sun, Wei Zhu, Shaochen Chen. Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications. Chemical Reviews 2020; 120(19): 10695 doi: 10.1021/acs.chemrev.9b00810
|
| 512 |
W. A. Chapa Pamodani Wanniarachchi, V. Janani, U. Sutharsini, M. Thanihaichelvan, S. Ramesh, C. K. Ng. Synthesis and sintering studies of hydroxyapatite derived from biogenic waste materials. 8TH BRUNEI INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY 2021 2023; 2643: 050017 doi: 10.1063/5.0113860
|
| 513 |
A. Shankar, N. K. Bhatt. Enhanced mechanical and thermophysical properties of Mg2Ca, Al2Ca, and Al4Ca bulk metallic glasses in comparison to crystalline alloys for bone grafting applications: A molecular dynamics investigation. Journal of Applied Physics 2024; 136(3) doi: 10.1063/5.0213686
|
| 514 |
Mihaela Buciumeanu, Allen Bagheri, Filipe Samuel Silva, Bruno Henriques, Andrés F. Lasagni, Nima Shamsaei. Tribocorrosion Behavior of NiTi Biomedical Alloy Processed by an Additive Manufacturing Laser Beam Directed Energy Deposition Technique. Materials 2022; 15(2): 691 doi: 10.3390/ma15020691
|
| 515 |
Claudia Cristina Biguetti, Franco Cavalla, Angélica Cristina Fonseca, Andre Petenucci Tabanez, Danyal A. Siddiqui, Sutton E. Wheelis, Rumio Taga, Walid D. Fakhouri, Renato Menezes Silva, Danieli C. Rodrigues, Gustavo Pompermaier Garlet. Effects of Titanium Corrosion Products on In Vivo Biological Response: A Basis for the Understanding of Osseointegration Failures Mechanisms. Frontiers in Materials 2021; 8 doi: 10.3389/fmats.2021.651970
|
| 516 |
Zhenqiang Dong, Qijuan Yuan, Keqing Huang, Wanli Xu, Guiting Liu, Zhipeng Gu. Gelatin methacryloyl (GelMA)-based biomaterials for bone regeneration. RSC Advances 2019; 9(31): 17737 doi: 10.1039/C9RA02695A
|
| 517 |
Tasfia Saba, Khondoker Safin Kaosar Saad, Adib Bin Rashid. Precise surface engineering: Leveraging chemical vapor deposition for enhanced biocompatibility and durability in biomedical implants. Heliyon 2024; 10(18): e37976 doi: 10.1016/j.heliyon.2024.e37976
|
| 518 |
Seul Ki Lee, Cheol-Min Han, Wooram Park, Ik Hwan Kim, Yoon Ki Joung, Dong Keun Han. Synergistically enhanced osteoconductivity and anti-inflammation of PLGA/β-TCP/Mg(OH)2 composite for orthopedic applications. Materials Science and Engineering: C 2019; 94: 65 doi: 10.1016/j.msec.2018.09.011
|
| 519 |
Rachele Sergi, Devis Bellucci, Valeria Cannillo. A Comprehensive Review of Bioactive Glass Coatings: State of the Art, Challenges and Future Perspectives. Coatings 2020; 10(8): 757 doi: 10.3390/coatings10080757
|
| 520 |
Leon Riehakainen, Chiara Cavallini, Paolo Armanetti, Daniele Panetta, Davide Caramella, Luca Menichetti. In Vivo Imaging of Biodegradable Implants and Related Tissue Biomarkers. Polymers 2021; 13(14): 2348 doi: 10.3390/polym13142348
|
| 521 |
Chenggong Zhang, Pihua Wen, Yigeng Xu, Zengxiang Fu, Guogang Ren. Exploring Advanced Functionalities of Carbon Fiber-Graded PEEK Composites as Bone Fixation Plates Using Finite Element Analysis. Materials 2024; 17(2): 414 doi: 10.3390/ma17020414
|
| 522 |
Kara K. Poon, Matthias C. Wurm, Donald M. Evans, Mari‐Ann Einarsrud, Rainer Lutz, Julia Glaum. Biocompatibility of (Ba,Ca)(Zr,Ti)O3 piezoelectric ceramics for bone replacement materials. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2020; 108(4): 1295 doi: 10.1002/jbm.b.34477
|
| 523 |
Harshala S. Naik, Parvindar M. Sah, Rajesh W. Raut. Advanced Drug Delivery. Studies in Mechanobiology, Tissue Engineering and Biomaterials 2023; 26: 291 doi: 10.1007/978-981-99-6564-9_12
|
| 524 |
Gunarajulu Renganathan, Narasimhaswamy Tanneru, Suguna Lakshmi Madurai. Fundamental Biomaterials: Metals. 2018; : 211 doi: 10.1016/B978-0-08-102205-4.00010-6
|
| 525 |
Salah Mebarki, Benaoumeur Aour, Franck Jourdan, Etienne Malachanne, Abdel Hakem Belaghit. A Study of the Biomechanical Behavior of the Implantation Method of Inverted Shoulder Prosthesis (BIO–RSA) under Different Abduction Movements. Bioengineering 2019; 6(1): 19 doi: 10.3390/bioengineering6010019
|
| 526 |
Lamborghini Sotelo, Tommaso Fontanot, Sanjana Vig, Maria Helena Fernandes, George Sarau, Gerd Leuchs, Silke Christiansen, Rainer Kling, Wilhelm Pfleging, Akira Watanabe. Initial surface roughness influence on the generation of LIPSS on titanium and stainless steel and their effect on cell/bacteria viability. Laser-based Micro- and Nanoprocessing XVII 2023; : 34 doi: 10.1117/12.2648921
|
| 527 |
Sadaqat Ali, Ahmad Majdi Abdul Rani, Riaz Ahmad Mufti, Farooq I. Azam, Sri Hastuty, Zeeshan Baig, Murid Hussain, Nasir Shehzad. The Influence of Nitrogen Absorption on Microstructure, Properties and Cytotoxicity Assessment of 316L Stainless Steel Alloy Reinforced with Boron and Niobium. Processes 2019; 7(8): 506 doi: 10.3390/pr7080506
|
| 528 |
Yu Liu, Björn Rath, Markus Tingart, Jörg Eschweiler. Role of implants surface modification in osseointegration: A systematic review. Journal of Biomedical Materials Research Part A 2020; 108(3): 470 doi: 10.1002/jbm.a.36829
|
| 529 |
Nathan T. Evans, Cameron W. Irvin, David L. Safranski, Ken Gall. Impact of surface porosity and topography on the mechanical behavior of high strength biomedical polymers. Journal of the Mechanical Behavior of Biomedical Materials 2016; 59: 459 doi: 10.1016/j.jmbbm.2016.02.033
|
| 530 |
Man-Tik Choy, Ka-Wai Yeung, Ling Chen, Chak-Yin Tang, Gary Chi-Pong Tsui, Wing-Cheung Law. In situ synthesis of osteoconductive biphasic ceramic coatings on Ti6Al4V substrate by laser-microwave hybridization. Surface and Coatings Technology 2017; 330: 92 doi: 10.1016/j.surfcoat.2017.09.081
|
| 531 |
Sameera Wickramasinghe, Monica Navarreto‐Lugo, Minseon Ju, Anna Cristina S. Samia. Applications and challenges of using 3D printed implants for the treatment of birth defects. Birth Defects Research 2018; 110(13): 1065 doi: 10.1002/bdr2.1352
|
| 532 |
Özgü Bayrak, Hojjat Ghahramanzadeh Asl, Ayşe Ak. Protein adsorption, cell viability and corrosion properties of Ti6Al4V alloy treated by plasma oxidation and anodic oxidation. International Journal of Minerals, Metallurgy and Materials 2020; 27(9): 1269 doi: 10.1007/s12613-020-2020-5
|
| 533 |
Priya Singh, Ashutosh Kumar Dubey. Electret‐induced antibacterial response of Mg1‐xCaxSi1‐xZrxO3 (x = 0–0.4) bioceramics. Journal of the American Ceramic Society 2024; 107(6): 4263 doi: 10.1111/jace.19688
|
| 534 |
Minho Lee, Song-I Han, Changkyu Kim, Subramaniam Velumani, Arum Han, Abdel Hadi Kassiba, Homero Castaneda. ZrO2/ZnO/TiO2 Nanocomposite Coatings on Stainless Steel for Improved Corrosion Resistance, Biocompatibility, and Antimicrobial Activity. ACS Applied Materials & Interfaces 2022; 14(11): 13801 doi: 10.1021/acsami.1c19498
|
| 535 |
A. M. Vijesh, Arun M. Isloor. Biodegradable Materials and Their Applications. 2022; : 429 doi: 10.1002/9781119905301.ch15
|
| 536 |
Dmytro Zaworonkow, Mykola Chekan, Katarzyna Kusnierz, Andrzej Lekstan, Aniela Grajoszek, Zdzislaw Lekston, Dariusz Lange, Timofey Chekalkin, Ji-hoon Kang, Victor Gunther, Pawel Lampe. Evaluation of TiNi-based wire mesh implant for abdominal wall defect management. Biomedical Physics & Engineering Express 2018; 4(2): 027010 doi: 10.1088/2057-1976/aaa0b0
|
| 537 |
Dharmendra K. Yadav, Anand K. Patel, Shruti R. Hansda, Arbind Acharya, Lakhindra Marandi, Surya D. Yadav, Subhasis Sinha. Comprehensive property combination for biomedical application achieved in a Ti35Zr35Nb15Mo5Fe5Cr5 complex concentrated alloy. Materials Today Communications 2024; 41: 110992 doi: 10.1016/j.mtcomm.2024.110992
|
| 538 |
Ritwik Aravindakshan, Kaiprappady Kunchu Saju, Reghuraj Aruvathottil Rajan. Investigation into Effect of Natural Shellac on the Bonding Strength of Magnesium Substituted Hydroxyapatite Coatings Developed on Ti6Al4V Substrates. Coatings 2021; 11(8): 933 doi: 10.3390/coatings11080933
|
| 539 |
Anirudh Kohli, Manoj Mathad, Santoshkumar V Hosamani, Mrutyunjay K Adagimath, Basavaraj B Kotturshettar. Finite element analysis of knee joint implant for varying bio material using ANSYS. Materials Today: Proceedings 2022; 59: 941 doi: 10.1016/j.matpr.2022.02.017
|
| 540 |
|
| 541 |
Nicola Contuzzi, Giuseppe Casalino, Antonio Boccaccio, Andrea Ballini, Ioannis Alexandros Charitos, Lucrezia Bottalico, Luigi Santacroce. Metals Biotribology and Oral Microbiota Biocorrosion Mechanisms. Journal of Functional Biomaterials 2022; 14(1): 14 doi: 10.3390/jfb14010014
|
| 542 |
D. Sri Maha Vishnu, Jagadeesh Sure, R. Vasant Kumar, Carsten Schwandt. Factors Controlling the Synthesis of Porous Ti-Based Biomedical Alloys by Electrochemical Deoxidation in Molten Salts. Metallurgical and Materials Transactions B 2021; 52(3): 1590 doi: 10.1007/s11663-021-02126-5
|
| 543 |
Shantanu Bandopadhyay, Nabamita Bandyopadhyay, Sarfaraz Ahmed, Vivek Yadav, Rakesh K. Tekade. Biomaterials and Bionanotechnology. 2019; : 337 doi: 10.1016/B978-0-12-814427-5.00010-X
|
| 544 |
B. Kaczmarek, A. Sionkowska. Chitosan/collagen blends with inorganic and organic additive—A review. Advances in Polymer Technology 2018; 37(6): 2367 doi: 10.1002/adv.21912
|
| 545 |
Ashraf Al Madhoun, Khaled Meshal, Neus Carrió, Eduard Ferrés-Amat, Elvira Ferrés-Amat, Miguel Barajas, Ana Leticia Jiménez-Escobar, Areej Said Al-Madhoun, Alaa Saber, Yazan Abou Alsamen, Carles Marti, Maher Atari. Randomized Clinical Trial: Bone Bioactive Liquid Improves Implant Stability and Osseointegration. Journal of Functional Biomaterials 2024; 15(10): 293 doi: 10.3390/jfb15100293
|
| 546 |
Saeromi Kim, Jenise B. Chen, Amanda Clifford. Tuning the Biointerface: Low-Temperature Surface Modification Strategies for Orthopedic Implants to Enhance Osteogenic and Antimicrobial Activity. ACS Applied Bio Materials 2021; 4(9): 6619 doi: 10.1021/acsabm.1c00651
|
| 547 |
Netta Bruchiel-Spanier, Shelly Betsis, Guy Naim, Daniel Mandler. Electrochemical and electrophoretic coatings of medical implants by nanomaterials. Journal of Solid State Electrochemistry 2022; 26(9): 1871 doi: 10.1007/s10008-022-05235-6
|
| 548 |
Poly-β-Cyclodextrin Functionalized Nanocellulose for Efficient Removal of Endocrine Disrupting Chemicals. Journal of Sustainability Research 2023; 5(3) doi: 10.20900/jsr20230010
|
| 549 |
Simina Angela Lăcrimioara Iușan, Ondine Patricia Lucaciu, Nausica Bianca Petrescu, Ioana Codruța Mirică, Dan-Alexandru Toc, Silviu Albu, Carmen Costache. The Main Bacterial Communities Identified in the Sites Affected by Periimplantitis: A Systematic Review. Microorganisms 2022; 10(6): 1232 doi: 10.3390/microorganisms10061232
|
| 550 |
A. Mahajan, S. S. Sidhu. Surface modification of metallic biomaterials for enhanced functionality: a review. Materials Technology 2018; 33(2): 93 doi: 10.1080/10667857.2017.1377971
|
| 551 |
Yi Yang, Moradi Masoumeh, Enze Zhou, Dan Liu, Yongbo Song, Dake Xu, Fuhui Wang, Jessica A. Smith. Streptococcus mutans biofilms induce metabolite-mediated corrosion of 316 L stainless steel in a simulated oral environment. Corrosion Science 2021; 182: 109286 doi: 10.1016/j.corsci.2021.109286
|
| 552 |
Amir Motallebzadeh, Naeimeh Sadat Peighambardoust, Saad Sheikh, Hideyuki Murakami, Sheng Guo, Demircan Canadinc. Microstructural, mechanical and electrochemical characterization of TiZrTaHfNb and Ti1.5ZrTa0.5Hf0.5Nb0.5 refractory high-entropy alloys for biomedical applications. Intermetallics 2019; 113: 106572 doi: 10.1016/j.intermet.2019.106572
|
| 553 |
Atul Babbar, Vivek Jain, Dheeraj Gupta, Sunpreet Singh, Chander Prakash, Catalin Pruncu. 3D Printing in Biomedical Engineering. Materials Horizons: From Nature to Nanomaterials 2020; : 167 doi: 10.1007/978-981-15-5424-7_8
|
| 554 |
Tuhin Sengupta, P. Muthu. Evolution of BioMaterials for Dental Implants and Futuristic Developments. 2019 IEEE 19th International Conference on Bioinformatics and Bioengineering (BIBE) 2019; : 625 doi: 10.1109/BIBE.2019.00118
|
| 555 |
Derick Yongabi, Stijn Jooken, Stella Givanoudi, Mehran Khorshid, Olivier Deschaume, Carmen Bartic, Patricia Losada-Pérez, Michael Wübbenhorst, Patrick Wagner. Ionic strength controls long-term cell-surface interactions – A QCM-D study of S. cerevisiae adhesion, retention and detachment. Journal of Colloid and Interface Science 2021; 585: 583 doi: 10.1016/j.jcis.2020.10.038
|
| 556 |
Yue‐Houng Hu, Hok Seum Wan Chan Tseung, Daniel W. Mundy. Physical characterization of therapeutic proton delivery through common dental materials. Medical Physics 2022; 49(5): 2904 doi: 10.1002/mp.15602
|
| 557 |
Natalia Bryniarska-Kubiak, Agnieszka Basta-Kaim, Andrzej Kubiak. Mechanobiology of Dental Pulp Cells. Cells 2024; 13(5): 375 doi: 10.3390/cells13050375
|
| 558 |
|
| 559 |
Allen Glied, Junaid Mundiya. Implant Material Sciences. Dental Clinics of North America 2021; 65(1): 81 doi: 10.1016/j.cden.2020.09.006
|
| 560 |
Heli Rushinek, Adir Cohen, Nardy Casap, Michael Alterman. The Effect of Implant-Associated Factors on the Long-Term Outcomes of Dental Implants. Oral and Maxillofacial Surgery Clinics of North America 2025; 37(1): 51 doi: 10.1016/j.coms.2024.08.009
|
| 561 |
Amir A. Elhadad, L. Romero-Resendiz, M.C. Rossi, L.M. Rodríguez-Albelo, Sheila Lascano, Conrado R.M. Afonso, A. Alcudia, V. Amigó, Y. Torres. Findings and perspectives of β-Ti alloys with biomedical applications: Exploring beyond biomechanical and biofunctional behaviour. Journal of Materials Research and Technology 2024; 33: 3550 doi: 10.1016/j.jmrt.2024.09.248
|
| 562 |
Vinita Vishwakarma, Gobi Kaliaraj, Kamalan Amirtharaj Mosas. Multifunctional Coatings on Implant Materials—A Systematic Review of the Current Scenario. Coatings 2022; 13(1): 69 doi: 10.3390/coatings13010069
|
| 563 |
Hiba M. Algailani, Suha I. Al-Nassar, Adel K. Mahmoud, Ahmed A. Ali. Synthesis of bio-nanocomposite coating (silver-multi wall carbon nano tubes) by electroless plating method. Materials Today: Proceedings 2023; doi: 10.1016/j.matpr.2023.02.017
|
| 564 |
J. Mesquita-Guimarães, B. Henriques, F.S. Silva, J.C.M. Souza, A.P. Novaes de Oliveira, D. Hotza, R.M. do Nascimento, M.C. Fredel. Nanostructured Biomaterials for Cranio-Maxillofacial and Oral Applications. 2018; : 97 doi: 10.1016/B978-0-12-814621-7.00006-8
|
| 565 |
Luminita Oancea, Eugenia Panaitescu, Mihai Burlibasa, Catalin Gagiu. Clinical versus Dental Laboratory Survey Regarding Modern Fixed Implant Supported Prosthetic in Romania. Applied Sciences 2022; 12(1): 472 doi: 10.3390/app12010472
|
| 566 |
Yingge Zhou, Dilshan Sooriyaarachchi, Defu Liu, George Z. Tan. Biomimetic strategies for fabricating musculoskeletal tissue scaffolds: a review. The International Journal of Advanced Manufacturing Technology 2021; 112(5-6): 1211 doi: 10.1007/s00170-020-06538-6
|
| 567 |
Goro Choi, Gu Min Jeong, Myung Seok Oh, Munkyu Joo, Sung Gap Im, Ki Jun Jeong, Eunjung Lee. Robust Thin Film Surface with a Selective Antibacterial Property Enabled via a Cross-Linked Ionic Polymer Coating for Infection-Resistant Medical Applications. ACS Biomaterials Science & Engineering 2018; 4(7): 2614 doi: 10.1021/acsbiomaterials.8b00241
|
| 568 |
Fang-Ching Chao, Meng-Huang Wu, Ling-Chun Chen, Hong-Liang Lin, Der-Zen Liu, Hsiu-O Ho, Ming-Thau Sheu. Preparation and characterization of chemically TEMPO-oxidized and mechanically disintegrated sacchachitin nanofibers (SCNF) for enhanced diabetic wound healing. Carbohydrate Polymers 2020; 229: 115507 doi: 10.1016/j.carbpol.2019.115507
|
| 569 |
Changcai Qin, Dezhao Che, Dongxue Liu, Zefei Zhang, Yihua Feng. Preparation and characterization of different micro/nano structures on the surface of bredigite scaffolds. Scientific Reports 2023; 13(1) doi: 10.1038/s41598-023-36382-z
|
| 570 |
Dragana Gabrić, Ana Budimir, Ivona Bago, Luka Marković, Verica Pavlić, Bleron Azizi. Photodynamic Therapy - From Basic Science to Clinical Research. 2021; doi: 10.5772/intechopen.94268
|
| 571 |
Thomas Chalklen, Qingshen Jing, Sohini Kar-Narayan. Biosensors Based on Mechanical and Electrical Detection Techniques. Sensors 2020; 20(19): 5605 doi: 10.3390/s20195605
|
| 572 |
Aleksandr Markov, Roger Wördenweber, Levan Ichkitidze, Alexander Gerasimenko, Ulyana Kurilova, Irina Suetina, Marina Mezentseva, Andreas Offenhäusser, Dmitry Telyshev. Biocompatible SWCNT Conductive Composites for Biomedical Applications. Nanomaterials 2020; 10(12): 2492 doi: 10.3390/nano10122492
|
| 573 |
Manar E Al-Samaray, Abdalbseet A Fatalla. Fabrication and characterization of PEKK nanocomposites: An in vitro study. Journal of Thermoplastic Composite Materials 2024; 37(4): 1442 doi: 10.1177/08927057231195613
|
| 574 |
Shesan J. Owonubi, Stephen C. Agwuncha, Victoria O. Fasiku, Emmanuel Mukwevho, Blessing A. Aderibigbe, Emmanuel R. Sadiku, Deon Bezuidenhout. Polyolefin Fibres. 2017; : 517 doi: 10.1016/B978-0-08-101132-4.00017-5
|
| 575 |
Mariana Brito Cruz, Neusa Silva, Joana Faria Marques, António Mata, Felipe Samuel Silva, João Caramês. Biomimetic Implant Surfaces and Their Role in Biological Integration—A Concise Review. Biomimetics 2022; 7(2): 74 doi: 10.3390/biomimetics7020074
|
| 576 |
Humayun Kabir, Khurram Munir, Cuie Wen, Yuncang Li. Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives. Bioactive Materials 2021; 6(3): 836 doi: 10.1016/j.bioactmat.2020.09.013
|
| 577 |
Nour Mahmoud Eldabah, Amin Shoukry, Wael Khair-Eldeen, Sengo Kobayashi, Mohamed Abdel Hady Gepreel. Neural Network Regressor for Designing Biomedical Low Elastic Modulus Ti-Zr-Nb-Mo Medium Entropy Alloys. Key Engineering Materials 2023; 967: 89 doi: 10.4028/p-nbmZ4t
|
| 578 |
Sadia Hassan, Aroosa Younis Nadeem, Muhammad Ali, Murtaza Najabat Ali, Muhammad Bilal Khan Niazi, Azhar Mahmood. Graphite coatings for biomedical implants: A focus on anti-thrombosis and corrosion resistance properties. Materials Chemistry and Physics 2022; 290: 126562 doi: 10.1016/j.matchemphys.2022.126562
|
| 579 |
Jorge A. Montes-Gutiérrez, Armida. A. Gil-Salido, Jesus J. Alcantar-Peña, Elida de Obaldia, Rafael Garcia-Gutierrez, Oscar E. Contreras-López, Orlando Auciello. Viability and proliferation of A549 cell line on the surface of micro-, nano- and ultrananocrystalline diamond films grown by HFCVD with tailored gases. Functional Diamond 2022; 2(1): 112 doi: 10.1080/26941112.2022.2126950
|
| 580 |
Alexander Erofeev, Ivan Antifeev, Anastasia Bolshakova, Ilya Bezprozvanny, Olga Vlasova. In Vivo Penetrating Microelectrodes for Brain Electrophysiology. Sensors 2022; 22(23): 9085 doi: 10.3390/s22239085
|
| 581 |
Lizeth Del Carmen Gutiérrez Púa, Juan Carlos Rincón Montenegro, Ana María Fonseca Reyes, Habib Zambrano Rodríguez, Virginia Nathaly Paredes Méndez. Biomaterials for orthopedic applications and techniques to improve corrosion resistance and mechanical properties for magnesium alloy: a review. Journal of Materials Science 2023; 58(9): 3879 doi: 10.1007/s10853-023-08237-5
|
| 582 |
Qifeng Jiang, Jewan Ismail, Fahmi Zaïri, Zhengwei Qu, Xiaobing Liu, Fahed Zaïri. Damage mechanisms in bioactive glass matrix composites under uniaxial compression. Journal of the Mechanical Behavior of Biomedical Materials 2018; 79: 264 doi: 10.1016/j.jmbbm.2017.12.020
|
| 583 |
R. Sh. Gvetadze, N. A. Dmitrieva, A. N. Voronin. Adhesion of microorganisms to various dental materials used to form a gum contour in implant-retained restorations. Stomatologiya 2019; 98(5): 118 doi: 10.17116/stomat201998051118
|
| 584 |
M.S. Araujo, J.F. Bartolomé, S. Mello-Castanho. Tribological and mechanical behaviour of 45S5 Bioglass®-based compositions containing alumina and strontium. Ceramics International 2020; 46(15): 24347 doi: 10.1016/j.ceramint.2020.06.216
|
| 585 |
G.S. Hikku, C. Arthi, R.B. Jeen Robert, K. Jeyasubramanian, R. Murugesan. Calcium phosphate conversion technique: A versatile route to develop corrosion resistant hydroxyapatite coating over Mg/Mg alloys based implants. Journal of Magnesium and Alloys 2022; 10(7): 1821 doi: 10.1016/j.jma.2022.06.005
|
| 586 |
Wenjing Zhang, Yuxin Qian, Ziyi Lu, Shuai Deng, Ximian Xiao, Ning Shao, Jiayang Xie, Jingcheng Zou, Yiru Ding, Minzhang Chen, Ting Wei, Qian Yu, Hong Chen, Shifang Luan, Runhui Liu. Secondary amine pendent β-peptide polymers realizing antimicrobial surfaces to prevent bacterial infection of implants. Applied Materials Today 2022; 29: 101599 doi: 10.1016/j.apmt.2022.101599
|
| 587 |
Abdullah Al Farraj Al Dosari, Syed Rashid Habib, Talal Alnassar, Abdulmonem Alshihri, Ranan Kamalan. The current considerations in the fabrication of implant prostheses and the state of prosthetic complications: A survey among the dental technicians. The Saudi Dental Journal 2018; 30(4): 299 doi: 10.1016/j.sdentj.2018.05.010
|
| 588 |
Mariya B. Sedelnikova, Ekaterina G. Komarova, Yurii P. Sharkeev, Anna V. Ugodchikova, Tatiana V. Tolkacheva, Julietta V. Rau, Evgeny E. Buyko, Vladimir V. Ivanov, Vladimir V. Sheikin. Modification of titanium surface via Ag-, Sr- and Si-containing micro-arc calcium phosphate coating. Bioactive Materials 2019; 4: 224 doi: 10.1016/j.bioactmat.2019.07.001
|
| 589 |
Carlos Pitta Kruize, Sara Panahkhahi, Niko Eka Putra, Pedro Diaz-Payno, Gerjo van Osch, Amir A. Zadpoor, Mohammad J. Mirzaali. Biomimetic Approaches for the Design and Fabrication of Bone-to-Soft Tissue Interfaces. ACS Biomaterials Science & Engineering 2023; 9(7): 3810 doi: 10.1021/acsbiomaterials.1c00620
|
| 590 |
Vishnu Priya Sampath, Krishnasamy Velmurugan. Surface Characterization of TiTaNbCuZr Coated Films and Its Enhanced Mechanical, Bio-Corrosion and Biocompatibility. Metals and Materials International 2023; 29(8): 2398 doi: 10.1007/s12540-022-01383-6
|
| 591 |
Chitra Chakravarthy, Ravi S. Patil, Shivraj Wagdargi, Santosh Kumar Malyala, Daisy Arahna Sofhia, Chethan V. Babu, Rakesh Koppunur, Aishwarya Mundodi. Validation of Low Cost Patient Specific Implant Design Using Finite Element Analysis (FEA) for Reconstruction of Segmental Mandibular Defects: A Case Report and Literature Review. Journal of Maxillofacial and Oral Surgery 2024; 23(5): 1096 doi: 10.1007/s12663-023-01926-3
|
| 592 |
Armando Reyes Rojas, Alfredo Aguilar Elguezabal, Alessandro Alan Porporati, Miguel Bocanegra Bernal, Hilda Esperanza Esparza Ponce. Performance of Metals and Ceramics in Total Hip Arthroplasty. Synthesis Lectures on Biomedical Engineering 2023; : 93 doi: 10.1007/978-3-031-25420-8_8
|