The delivery of therapeutic agents faces significant hurdles posed by the endo-lysosomal pathway, a bottleneck that hampers clinical effectiveness. This comprehensive review addresses the urgent need to enhance cellular delivery mechanisms to overcome these obstacles. It focuses on the potential of smart nanomaterials, delving into their unique characteristics and mechanisms in detail. Special attention is given to their ability to strategically evade endosomal entrapment, thereby enhancing therapeutic efficacy. The manuscript thoroughly examines assays crucial for understanding endosomal escape and cellular uptake dynamics. By analyzing various assessment methods, we offer nuanced insights into these investigative approaches' multifaceted aspects. We meticulously analyze the use of smart nanocarriers, exploring diverse mechanisms such as pore formation, proton sponge effects, membrane destabilization, photochemical disruption, and the strategic use of endosomal escape agents. Each mechanism's effectiveness and potential application in mitigating endosomal entrapment are scrutinized. This paper provides a critical overview of the current landscape, emphasizing the need for advanced delivery systems to navigate the complexities of cellular uptake. Importantly, it underscores the transformative role of smart nanomaterials in revolutionizing cellular delivery strategies, leading to a paradigm shift towards improved therapeutic outcomes.

In spinal cord injuries, axonal regeneration decreases with the activation of astrocytes followed by glial scar formation. Targeting reactive astrocytes has been recently performed by unsafe viral vectors to inhibit gliosis. In the current study, biocompatible polymeric nanoparticles were selected as an alternative for viruses to target reactive astrocytes for further drug/gene delivery applications. Lipopolysaccharide-bonded chitosan-quantum dots/poly acrylic acid nanoparticles were prepared by ionic gelation method to target reactive astrocytes both in vitro and in spinal cord-injured rats. Owing to their biocompatibility and pH-responsive behavior, chitosan and poly acrylic acid were the main components of nanoparticles. Nanoparticles were then chemically labeled with quantum dots to track the cell uptake and electrostatically interacted with lipopolysaccharide as a targeting ligand. In vitro and in vivo studies were performed in triplicate and all data were expressed as the mean ± the standard error of the mean. Smart nanoparticles with optimum size (61.9 nm) and surface charge (+ 12.5 mV) successfully targeted primary reactive astrocytes extracted from the rat cerebral cortex. In vitro studies represented high cell viability (96%) in the exposure of biocompatible nanoparticles. The pH-responsive behavior of nanoparticles was proved by their internalization into the cell's nuclei due to the swelling and endosomal escape of nanoparticles in acidic pH. In vivo studies demonstrated higher transfection of nanoparticles into reactive astrocytes compared to the neurons. pH-responsive ligand-bonded chitosan-based nanoparticles are good alternatives for viral vectors in targeted delivery applications for the treatment of spinal cord injuries.

Probiotics provide several benefits for humans, including restoring the balance of gut bacteria, boosting the immune system, and aiding in the management of certain conditions such as irritable bowel syndrome and lactose intolerance. However, the viability of probiotics may undergo a significant reduction during food storage and gastrointestinal transit, potentially hindering the realization of their health benefits. Microencapsulation techniques have been recognized as an effective way to improve the stability of probiotics during processing and storage and allow for their localization and slow release in intestine. Although, numerous techniques have been employed for the encapsulation of probiotics, the encapsulation techniques itself and carrier types are the main factors affecting the encapsulate effect. This work summarizes the applications of commonly used polysaccharides (alginate, starch, and chitosan), proteins (whey protein isolate, soy protein isolate, and zein) and its complex as the probiotics encapsulation materials; evaluates the evolutions in microencapsulation technologies and coating materials for probiotics, discusses their benefits and limitations, and provides directions for future research to improve targeted release of beneficial additives as well as microencapsulation techniques. This study provides a comprehensive reference for current knowledge pertaining to microencapsulation in probiotics processing and suggestions for best practices gleaned from the literature.

Glaucoma is a leading cause of irreversible visual impairment and blindness, affecting over 76.0 million people worldwide in 2020, with a predicted increase to 111.8 million by 2040. Hypotensive eye drops remain the gold standard for glaucoma treatment, while inadequate patient adherence to medication regimens and poor bioavailability of drugs to target tissues are major obstacles to effective treatment outcomes. Nano/micro-pharmaceuticals, with diverse spectra and abilities, may represent a hope of removing these obstacles. This review describes a set of intraocular nano/micro drug delivery systems involved in glaucoma treatment. Particularly, it investigates the structures, properties, and preclinical evidence supporting the use of these systems in glaucoma, followed by discussing the route of administration, the design of systems, and factors affecting in vivo performance. Finally, it concludes by highlighting the emerging notion as an attractive approach to address the unmet needs for managing glaucoma.

Chitosan-based nanoparticles have been extensively studied for the delivery of nucleic acids. Previous results suggest that these nanoparticles have limited ability to escape the endosome, one of the main cellular barriers hindering nucleic acid delivery. Escape can be improved by the addition of endosomolytic agents during the formulation process or by developing delivery systems with intrinsic properties to disrupt endosomal membranes. In this study, Poly(2-Propylacrylic Acid) (PPAA), an anionic synthetic polymer with known membrane lytic activity was added to the binary chitosan/mRNA nanoparticles to improve bioactivity. The ionization behavior of PPAA was characterized to identify conditions in which PPAA is sufficiently charged to interact electrostatically with chitosan and thus form nanoparticles. The physicochemical characteristics (hydrodynamic diameter, polydispersity index, ζ-potential) and the in vitro transfection efficiency (bioactivity) of this new family of CS/mRNA/PPAA ternary nanoparticles were evaluated. The addition of PPAA to CS/mRNA nanoparticles was shown to be an efficient strategy to augment in vitro bioactivity. The optimal formulation reached an expression level  ~86% of the commercial lipid control at pH 6.5 without any signs of metabolic toxicity. In this paper, we report the effect of salt and pH on the ionization behavior of PPAA and demonstrate 1) successful incorporation of PPAA into/onto nanoparticles, 2) improved bioactivity with PPAA, and 3) that the kosmotropic effects of trehalose play a minimal role in the apparent increase in bioactivity in presence of trehalose.

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

The human intestine contains thousands of bacterial species essential for optimal health. Aside from their pathogenic effects, these bacteria have been associated with the efficacy of various treatments of diseases. Due to their impact on many human diseases, intestinal bacteria are receiving increasing research attention, and recent studies on intestinal bacteria and their effects on treatments has yielded valuable results. Particularly, intestinal bacteria can affect responses to numerous forms of immunotherapy, especially cancer therapy. With the development of precision medicine, understanding the factors that influence intestinal bacteria and how they can be regulated to enhance immunotherapy effects will improve the application prospects of intestinal bacteria therapy. Further, biomaterials employed for the convenient and efficient delivery of intestinal bacteria to the body have also become a research hotspot. In this review, we discuss the recent findings on the regulatory role of intestinal bacteria in immunotherapy, focusing on immune cells they regulate. We also summarize biomaterials used for their delivery.

Polymeric vehicles that efficiently package and controllably release nucleic acids enable the development of safer and more efficacious strategies in genetic and polynucleotide therapies. Developing delivery platforms that endogenously monitor the molecular interactions, which facilitate binding and release of nucleic acids in cells, would aid in the rational design of more effective vectors for clinical applications. Here, we report the facile synthesis of a copolymer containing quinine and 2-hydroxyethyl acrylate that effectively compacts plasmid DNA (pDNA) through electrostatic binding and intercalation. This polymer system poly(quinine-co-HEA) packages pDNA and shows exceptional cellular internalization, transgene expression, and low cytotoxicity compared to commercial controls for several human cell lines, including HeLa, HEK 293T, K562, and keratinocytes (N/TERTs). Using quinine as an endogenous reporter for pDNA intercalation, Raman imaging revealed that proteins inside cells facilitate the unpackaging of polymer-DNA complexes (polyplexes) and the release of their cargo. Our work showcases the ability of this quinine copolymer reporter to not only facilitate effective gene delivery but also enable diagnostic monitoring of polymer-pDNA binding interactions on the molecular scale via Raman imaging. The use of Raman chemical imaging in the field of gene delivery yields unprecedented insight into the unpackaging behavior of polyplexes in cells and provides a methodology to assess and design more efficient delivery vehicles for gene-based therapies.

Poor buffering capacity of chitosan (CS) results in insufficient intracellular gene release which poses the major barrier in gene delivery. Herein, we reconstructed pristine CS with propylamine (PA), (diethylamino) propylamine (DEAPA), and N, N-dimethyl- dipropylenetriamine (DMAMAPA) to obtain a series of alkylamine-chitosan (AA-CS). The introduction of multiple amino groups with rational ratios functionally enhance the buffering capacity of AA-CS, among which DMAPAPA-CS showed buffering capacity of 1.58 times that of chitosan. The reconstructed AA-CS functionally enhance the ability of gene binding and endosomal escape. It was observed that the DMAPAPA-CS/pDNA complexes exhibit a notable gene delivery efficiency, which promotes the functionalization of loaded pDNA. Importantly, the in vivo delivery assay reveals that the deep penetration issue can be resolved using DMAPAPA-CS gene delivery vector. Finally, the DMAPAPA-CS is applied to deliver the therapeutic p53 gene in A549 bearing mice, showing efficient therapeutic potential for cancer.

New biopharmaceutical molecules, potentially able to provide more personalized and effective treatments, are being identified through the advent of advanced synthetic biology strategies, sophisticated chemical synthesis approaches, and new analytical methods to assess biological potency. However, translation of many of these structures has been significantly limited due to the need for more efficient strategies to deliver macromolecular therapeutics to desirable intracellular sites of action. Engineered nanocarriers that encapsulate peptides, proteins, or nucleic acids are generally internalized into target cells via one of several endocytic pathways. These nanostructures, entrapped within endosomes, must navigate the intracellular milieu to orchestrate delivery to the intended destination, typically the cytoplasm or nucleus. For therapeutics active in the cytoplasm, endosomal escape continues to represent a limiting step to effective treatment, since a majority of nanocarriers trapped within endosomes are ultimately marked for enzymatic degradation in lysosomes. Therapeutics active in the nucleus have the added challenges of reaching and penetrating the nuclear envelope, and nuclear delivery remains a preeminent challenge preventing clinical translation of gene therapy applications. Herein, we review cutting-edge peptide- and polymer-based design strategies with the potential to enable significant improvements in biopharmaceutical efficacy through improved intracellular targeting. These strategies often mimic the activities of pathogens, which have developed innate and highly effective mechanisms to penetrate plasma membranes and enter the nucleus of host cells. Understanding these mechanisms has enabled advances in synthetic peptide and polymer design that may ultimately improve intracellular trafficking and bioavailability, leading to increased access to new classes of biotherapeutics.

Intracellular drug delivery by nanoparticles is often hampered by their endosomal entrapment followed by their degradation in the lysosomal compartment and/or exocytosis. Here, we show that internalization and endosomal escape of cargoes in a cationized natural nanocarrier, high-density lipoprotein (HDL), can be controlled in a pH-dependent manner through stable complexation with a membranolytic anionic block polymer. A genetically and chemically cationized form of HDL (catHDL) is prepared for the first time by both genetic fusion with YGRKKRRQRRR peptide and incorporation of 1,2-dioleoyloxy-3-(trimethylammonium)propane. Upon addition of poly(ethylene glycol)-block-poly(propyl methacrylate-co-methacrylic acid) (PA), catHDL yields inhibition of internalization at neutral pH and its subsequent recovery at mildly acidic pH. catHDL forms a stable discoidal-shape complex with PA (catHDL/PA) (ca. 50 nm in diameter), even in the presence of serum. Significant enhancement of endosomal escape of a catHDL component is observed after a 1-h treatment of human cancer cells with catHDL/PA. Doxorubicin and curcumin, fluorescent anti-cancer drugs, encapsulated into catHDL/PA are also translocated outside of endosomes, compared with that into catHDL, and their cytotoxicities are enhanced inside the cells. These data suggest that catHDL/PA may have a potential benefit to improve the cellular delivery and endosomal escape of therapeutics under mildly acidic conditions such as in tumor tissues.

Nanomaterials based on chitosan have emerged as promising carriers of therapeutic agents for drug delivery due to good biocompatibility, biodegradability, and low toxicity. Chitosan originated nanocarriers have been prepared by mini-emulsion, chemical or ionic gelation, coacervation/precipitation, and spray-drying methods. As alternatives to these traditional fabrication methods, self-assembled chitosan nanomaterials show significant advantages and have received growing scientific attention in recent years. Self-assembly is a spontaneous process by which organized structures with particular functions and properties could be obtained without additional complicated processing or modification steps. In this review, we focus on recent progress in the design, fabrication and physicochemical aspects of chitosan-based self-assembled nanomaterials. Their applications in drug delivery of different therapeutic agents are also discussed in details.

Alternatives to efficient viral vectors in gene therapy are desired because of their poor safety profiles. Chitosan is a promising non-viral nucleotide delivery vector because of its biocompatibility, biodegradability, low immunogenicity and ease of manufacturing. Since the transfection efficiency of chitosan polyplexes is relatively low compared to viral counterparts, there is an impetus to gain a better understanding of the structure-performance relationship. Recent progress in preparation and characterisation has enabled coupling analysis of chitosans structural parameters that has led to increased TE by tailoring of chitosan's structure. In this review, we summarize the recent advances that have lead to a more rational design of chitosan polyplexes. We present an integrated review of all major areas of chitosan-based transfection, including preparation, chitosan and polyplexes physicochemical characterisation, in vitro and in vivo assessment. In each, we present the obstacles to efficient transfection and the strategies adopted over time to surmount these impediments.

Treatment and management of diseases of the posterior segment of the eye such as diabetic retinopathy, retinoblastoma, retinitis pigmentosa, and choroidal neovascularization is a challenging task due to the anatomy and physiology of ocular barriers. For instance, traditional routes of drug delivery for therapeutic treatment are hindered by poor intraocular penetration and/or rapid ocular elimination. One possible approach to improve ocular therapy is to employ nanotechnology. Nanomedicines, products of nanotechnology, having at least one dimension in the nanoscale include nanoparticles, micelles, nanotubes, and dendrimers, with and without targeting ligands. Nanomedicines are making a significant impact in the fields of ocular drug delivery, gene delivery, and imaging, the focus of this review. Key applications of nanotechnology discussed in this review include a) bioadhesive nanomedicines; b) functionalized nanomedicines that enhance target recognition and/or cell entry; c) nanomedicines capable of controlled release of the payload; d) nanomedicines capable of enhancing gene transfection and duration of transfection; f) nanomedicines responsive to stimuli including light, heat, ultrasound, electrical signals, pH, and oxidative stress; g) diversely sized and colored nanoparticles for imaging, and h) nanowires for retinal prostheses. Additionally, nanofabricated delivery systems including implants, films, microparticles, and nanoparticles are described. Although the above nanomedicines may be administered by various routes including topical, intravitreal, intravenous, transscleral, suprachoroidal, and subretinal routes, each nanomedicine should be tailored for the disease, drug, and site of administration. In addition to the nature of materials used in nanomedicine design, depending on the site of nanomedicine administration, clearance and toxicity are expected to differ.

Nonviral delivery of nucleic acids is a potentially safe and viable therapeutic modality for inherited and acquired diseases. However, current systems have proven too inefficient for widespread clinical translation. The rational design of improved carriers depends on a quantitative, mechanistic understanding of the rate-limiting barriers to efficient intracellular delivery. Separation of the nucleic acid from the carrier is one of the barriers, which may be analyzed by Förster resonance energy transfer (FRET), a mechanism used to detect interactions between fluorescently labeled molecules. When applied to the molecular components of polymer or lipid-based nanocomplexes, FRET provides information on their complexation status, uptake, release and degradation. Recently, the design of FRET systems incorporating quantum dots as energy donors has led to improved signal stability, allowing prolonged measurements, as well as increased sensitivity, enabling direct detection and the potential for multiplexing. The union of quantum dots and FRET is providing new insights into the mechanisms of nonviral nucleic acid delivery through convergent characterization of delivery barriers, and has the potential to accelerate the design of improved carriers to realize the potential of nucleic acid therapeutics and gene medicine.

Non-viral vectors have been widely proposed as safer alternatives to viral vectors, and cationic polymers have gained increasing attention because they can form self-assembly with DNA. Chitosan is also considered to be a good candidate for gene delivery systems, since it is already known as a biocompatible, biodegradable, and low toxic material with high cationic potential. However, low solubility and transfection efficiency need to be overcome prior to clinical trial. In this work, we focus on alkyl modified chitosan which might be useful in DNA condensing and efficient gene delivery.

N, N- Diethyl N- Methyl (DEMC) and N- Triethyl Chitosan (TEC) were synthesized from chitosan polymer. In order to optimize the polymers for gene delivery, we used FITC-dextran (FD). Then the optimized polymer concentrations were used for gene delivery. Fluorescent microscope was used, in order to evaluate the polymers' efficiency for gene delivery to human embryonic kidney epithelial cells (HEK 293T).

This modification increased chitosan's positive charge, thus these chitosan derivatives spontaneously formed complexes with FD, green fluorescence protein plasmid DNA (pEGFP), red fluorescence protein plasmid DNA (pJred) and fluorescent labeled miRNA .RESULTS gained from fluorescent microscope showed that TEC and DEMC were able to transfer FD, DNA and miRNA (micro RNA) to HEK cell line.

We conclude that these chitosan derivatives present suitable characteristics to be used as non-viral gene delivery vectors to epithelial cells.

Although polymers, polyplexes, and cells are exposed to various extracellular and intracellular pH environments during polyplex preparation and polymeric transfection, the impact of environmental pH on polymeric transfection has not yet been investigated. This study aims to understand the influence of environmental pH on polymeric transfection by modulating the pH of the transfection medium or the culture medium. Changes in the extracellular pH affected polymeric transfection by way of complex factors such as pH-induced changes in polymer characteristics (e.g., proton buffering capacity and ionization), polyplex characteristics (e.g., size, surface charge, and decomplexation), and cellular characteristics (e.g., cellular uptake, cell cycle phases, and intracellular pH environment). Notably, acidic medium delayed endocytosis, endosomal acidification, cytosolic release, and decomplexation of polyplexes, thereby negatively affecting gene expression. However, acidic medium inhibited mitosis and reduced dilution of gene expression, resulting in increased transfection efficiency. Compared to pH 7.4 medium, acidic transfection medium reduced gene expression 1.6-7.7-fold whereas acidic culture medium enhanced transfection efficiency 2.1-2.6-fold. Polymeric transfection was affected more by the culture medium than by the transfection medium. Understanding the effects of extracellular pH during polymeric transfection may stimulate new strategies for determining effective and safe polymeric gene carriers.

Chitosan nanoparticles are good drug carriers because of their good biocompatibility and biodegradability, and can be readily modified. As a new drug delivery system, they have attracted increasing attention for their wide applications in, for example, loading protein drugs, gene drugs, and anticancer chemical drugs, and via various routes of administration including oral, nasal, intravenous, and ocular. This paper reviews published research on chitosan nanoparticles, including its preparation methods, characteristics, modification, in vivo metabolic processes, and applications.

The transfection efficiency (TE) of chitosan-plasmid DNA (pDNA) polyplexes can be critically modulated by the polymer degree of deacetylation (DDA) and molecular weight (MW). This study was performed to test the hypothesis that the TE dependence on chitosan MW and DDA is related to the polyplex stability, hence their intracellular decondensation/unpacking kinetics. Major barriers to nonviral gene transfer were studied by image-based quantification. Although uptake increased with increased DDA, it did not appear to be a structure-dependent process affecting TE, nor was nuclear entry. Colocalization analysis showed that all chitosans trafficked through lysosomes with similar kinetics. Fluorescent resonant energy transfer (FRET) analysis revealed a distinct relationship between TE and polyplex dissociation rate. The most efficient chitosans showed an intermediate stability and a kinetics of dissociation, which occurred in synchrony with lysosomal escape. In contrast, a rapid dissociation before lysosomal escape was found for the inefficient low DDA chitosan whereas the highly stable and inefficient complex formed by a high MW and high DDA chitosan did not dissociate even after 24 hours. This study identified that the kinetics of decondensation in relation to lysosomal escape was a most critical structure-dependent process affecting the TE of chitosan polyplexes.

Among non-viral vectors, chitosan and chitosan derivatives have been developed in vitro and in vivo for DNA and siRNA delivery systems because of their cationic charge, biodegradability and biocompatibility, as well as their mucoadhesive and permeability-enhancing properties. However, the transfection efficiency of chitosan is too low for clinical application. Studies indicated that the transfection efficiency depends on a series of chitosan-based formulation parameters, such as the Mw of chitosan, its degree of deacetylation, the charge ratio of chitosan to DNA/siRNA (N/P ratio), the chitosan salt form used, the DNA/siRNA concentration, pH, serum, additives, preparation techniques of chitosan/nucleic acid particles and routes of administration. In this paper, chitosan-based formulations for the delivery of DNA and siRNA were reviewed to facilitate the process of chitosan vector development for clinical application. In addition to formulation optimization, chitosan structure modification or additive incorporation is an effective way to improve the stability of the polyplex in biological fluids, enhance targeted cell delivery and facilitate endo-lysosomal release of the complex. In summary, the transfection efficiency of chitosan-based delivery systems can be adjusted by changing formulation-related parameters.

Ionically crosslinked nanoparticles based on high and low molecular weight chitosans (CS) were formulated with plasmid DNA or dsDNA oligomers using the ionic gelation technique with pentasodium tripolyphospate (TPP) as crosslinking agent. The resulting CS/TPP nanoparticles were investigated with regard to their physical-chemical properties, in vitro transfection efficiency, toxicity, cellular uptake, and in vivo gene expression following intratracheal administration to mice. The effects of co-formulating the nanoparticles with a model protein, BSA, were also studied. CS/TPP nanoparticles showed high encapsulation efficiencies both for plasmid DNA and dsDNA oligomers (20-mers), independent of CS molecular weight. TEM images revealed a spherical shape of the CS/TPP nanoparticles in contrast to the heterogeneous and irregular morphology displayed by conventional chitosan polyplexes. The nanoparticles showed high physical stability and no DNA release could be detected in diverse release media, nor even after incubation with heparin. Low molecular weight (LMW) CS/TPP nanoparticles gave high gene expression levels in HEK 293 cells already 2 days after transfection, reaching a plateau of sustained and high gene expression between 4 and 10 days. The inclusion of BSA into the nanostructures did not alter the inherent transfection efficiency of the nanoparticles. Confocal studies suggest endocytotic cellular uptake of the nanoparticles and a subsequent release into the cytoplasm within 14 h. LMW CS/TPP nanoparticles mediated a strong beta-galactosidase expression in vivo after intratracheal administration. The results of this study forward ionically crosslinked CS/TPP nanoparticles as a biocompatible non-viral gene delivery system and generate a solid ground for further optimization studies, for example with regard to steric stabilization and targeting.

pH-responsive polymers have been synthesised by grafting l-valine (PV-75), l-leucine (PL-75) and l-phenylalanine (PP-75) onto the pendant carboxylic acid moieties of a pseudo-peptide, poly(l-lysine iso-phthalamide), at a stoichiometric degree of substitution of 75 mol%. The effect of such modification on the pH-, concentration- and time-dependent cell membrane-disruptive activity of the grafted polymers has been investigated using a haemolysis model. At 0.025 mg mL(-1), the grafted polymers were almost non-haemolytic at pH 7.4, but mediated considerable membrane lysis after 60 min in the pH range characteristic of early endosomes, which ranked in the order: PP-75 > PL-75 > PV-75 > poly(l-lysine iso-phthalamide). PP-75 was 35-fold more lytic on a molar basis than the membrane-lytic peptide melittin. With increasing concentration, the grafted polymers showed an increased ability to lyse cell membranes and caused noticeable membrane disruption at physiological pH. The mechanism of the polymer-mediated membrane destabilisation has been investigated. The in-vitro cytotoxicity of the grafted polymers has been assessed using a propidium iodide fluorescence assay. It has been demonstrated by confocal microscopy that the grafted polymers can induce a significant release of endocytosed materials into the cytoplasm of HeLa cells, which is a feature critical for drug delivery applications.

Chitosan is a naturally occurring cationic mucopolysaccharide. It is generally biocompatible, biodegradable, mucoadhesive, non-immunogenic and non-toxic. Although chitosan is able to condense nucleic acids (NA) (both DNA and RNA) and protect them from nuclease degradation, its poor water solubility and low transfection efficacy have impeded its use as an NA carrier. In order to overcome such limitations, a multitude of strategies for chitosan modification and formulation have been proposed. In this article, we will first give a brief overview of the physical and biological properties of chitosan. Then, with a special focus on plasmid DNA delivery, we will have a detailed discussion of the latest advances in chitosan-mediated NA transfer. For future research, the following three important areas will be discussed: chitosan-mediated therapeutic small RNA transfer, structure-activity relationships (SAR) in chitosan vector design, and chitosan-mediated oral/nasal NA therapy.

The effect of PEGylation on the aqueous solution properties and cell membrane disruptive activity of a pH-responsive pseudo-peptide, poly(l-lysine iso-phthalamide), has been investigated by dynamic light scattering, haemolysis and lactate dehydrogenase (LDH) assays. Intracellular trafficking of the polymers has been examined using confocal and fluorescence microscopy. With increasing degree of PEGylation, the modified polymers can form stabilised compact structures with reduced mean hydrodynamic diameters. Poly(l-lysine iso-phthalamide) with a low degree of PEGylation (17.4 wt%) retained pH-dependent solution behaviour and showed enhanced kinetic membrane disruptive activity compared to the parent polymer. It facilitated trafficking of endocytosed materials into the cytoplasm of HeLa cells. At levels of PEGylation in excess of 25.6 wt%, the modified polymers displayed a single particle size distribution unresponsive to pH, as well as a decrease in cell membrane lytic ability. The mechanism involved in membrane destabilisation was also investigated, and the potential applications of these modified polymers in drug delivery were discussed.

A major challenge for non-viral gene delivery is gaining a mechanistic understanding of the rate-limiting steps. A critical barrier in polyplex-mediated gene delivery is the timely unpacking of polyplexes within the target cell to liberate DNA for efficient gene transfer. In this study, the component plasmid DNA and polymeric gene carrier were individually labeled with quantum dots (QDs) and Cy5 dyes, respectively, as a donor and acceptor pair for fluorescence resonance energy transfer (FRET). The high signal-to-noise ratio in QD-mediated FRET enabled sensitive detection of discrete changes in polyplex stability. The intracellular uptake and dissociation of polyplexes through QD-FRET was captured over time by confocal microscopy. From quantitative image-based analysis, distributions of released plasmid within the endo/lysosomal, cytosolic, and nuclear compartments formed the basis for constructing a three-compartment first-order kinetics model. Polyplex unpacking kinetics for chitosan, polyethylenimine, and polyphosphoramidate were compared and found to correlate well with transfection efficiencies. Thus, QD-FRET-enabled detection of polyplex stability combined with image-based quantification is a valuable method for studying mechanisms involved in polyplex unpacking and trafficking within live cells. We anticipate that this method will also aid the design of more efficient gene carriers.

Delivery of genetic substance to target cells remains an obstacle for efficient utilization of gene therapy approaches. In this study, we describe a formulation of methacrylate acid copolymer carrier of DNA, in which the release rate of the gene can be controlled by pH. Plasmid release was coupled with the polymer's dissolution, which was accelerated in alkali conditions. The released plasmid was intact and bioactive, although alteration from closed circular supercoil to relaxed conformation was observed. Confocal laser scanning microscopy detected the plasmid DNA along the central layers of the polymeric film. Gene delivery systems controlled by the dissolution of the polymeric films offer flexibility in quantity and size of the incorporated DNA, and therefore could have a potential for in vivo use.

Polymeric drug-loaded nanoparticles have been extensively studied in the field of drug delivery. Biodistribution depends on the physicochemical properties of particles, especially size. The global message from the literature is that small particles have an enhanced ability to reach their target. The present review highlights the difficulties in validating the data from biodistribution studies without accurate particle size determination.

We demonstrate a highly sensitive method to characterize the structural composition and intracellular fate of polymeric DNA nanocomplexes, formed by condensing plasmid DNA with cationic polymers through electrostatic interactions. Rational design of more efficient polymeric gene carriers will be possible only with mechanistic insights of the rate-limiting steps in the non-viral gene transfer process. To characterize the composition and binding dynamics of nanocomplexes, plasmid and its polymer carrier within nanocomplexes were labeled with quantum dots (QDs) and fluorescent organic dyes, respectively, as a donor and acceptor pair for fluorescence resonance energy transfer (FRET). The high signal-to-noise ratio in QD-mediated FRET enabled precise detection of discrete changes in nanocomplex state at the single-particle level, against various intracellular microenvironments. The distribution and unpacking of individual nanocomplexes within cells could thus be unambiguously followed by fluorescence microscopy. QD-FRET is a highly sensitive and quantitative method to determine the composition and dynamic stability of nanocomplexes during intracellular transport, where barriers to gene delivery may be identified to facilitate gene carrier optimization.

The use of antisense oligodeoxynucleotides (ODNs) to inhibit the expression of specific mRNA targets represents a powerful technology for control of gene expression. Cationic lipids and polymers are frequently used to improve the delivery of ODNs to cells, but the resulting complexes often aggregate, bind to serum components, and are trafficked poorly within cells. We show that the addition of a synthetic, pH-sensitive, membrane-disrupting polyanion, poly(propylacrylic acid) (PPAA), improves the in vitro efficiency of the cationic lipid, DOTAP, with regard to oligonucleotide delivery and antisense activity. In characterization studies, ODN complexation with DOTAP/ODN was maintained even when substantial amounts of PPAA were added. The formulation also exhibited partial protection of phosphodiester oligonucleotides against enzymatic digestion. In Chinese hamster ovary (CHO) cells, incorporation of PPAA in DOTAP/ODN complexes improved 2- to 3-fold the cellular uptake of fluorescently tagged oligonucleotides. DOTAP/ODN complexes containing PPAA also maintained high levels of uptake into cells upon exposure to serum. Addition of PPAA to DOTAP/ODN complexes enhanced the antisense activity (using GFP as the target) over a range of PPAA concentrations in both serum-free, and to a lesser extent, serum-containing media. Thus, PPAA is a useful adjunct that improves the lipid-mediated delivery of oligonucleotides.

Chitosan is a widely available, mucoadhesive polymer that is able to increase cellular permeability and improve the bioavailability of orally administered protein drugs. It can also be readily formed into nanoparticles able to entrap drugs or condense plasmid DNA. Studies on the formulation and oral delivery of such chitosan nanoparticles have demonstrated their efficacy in enhancing drug uptake and promoting gene expression. This review summarizes some of these findings and highlights the potential of chitosan as a component of oral delivery systems.

The lack of safe and efficient gene-delivery methods is a limiting obstacle to human gene therapy. Synthetic gene-delivery agents, although safer than recombinant viruses, generally do not possess the required efficacy. In recent years, a variety of effective polymers have been designed specifically for gene delivery, and much has been learned about their structure-function relationships. With the growing understanding of polymer gene-delivery mechanisms and continued efforts of creative polymer chemists, it is likely that polymer-based gene-delivery systems will become an important tool for human gene therapy.