BPG is committed to discovery and dissemination of knowledge
Cited by in F6Publishing
For: Oberoi G, Nitsch S, Edelmayer M, Janjić K, Müller AS, Agis H. 3D Printing-Encompassing the Facets of Dentistry. Front Bioeng Biotechnol 2018;6:172. [PMID: 30525032 DOI: 10.3389/fbioe.2018.00172] [Cited by in Crossref: 80] [Cited by in F6Publishing: 83] [Article Influence: 20.0] [Reference Citation Analysis]
Number Citing Articles
1 Golubović Z, Mitrović A, Mitrović N. 3D Printing in Contemporary Dentistry. Experimental Research and Numerical Simulation in Applied Sciences 2023. [DOI: 10.1007/978-3-031-19499-3_12] [Reference Citation Analysis]
2 Morón-conejo B, López-vilagran J, Cáceres D, Berrendero S, Pradíes G. Accuracy of five different 3D printing workflows for dental models comparing industrial and dental desktop printers. Clin Oral Invest 2022. [DOI: 10.1007/s00784-022-04809-y] [Reference Citation Analysis]
3 Bogala MR. Three-dimensional (3D) printing of hydroxyapatite-based scaffolds: A review. Bioprinting 2022;28:e00244. [DOI: 10.1016/j.bprint.2022.e00244] [Reference Citation Analysis]
4 Siva Bhaskar A, Khan A. Comparative analysis of hybrid MCDM methods in material selection for dental applications. Expert Systems with Applications 2022;209:118268. [DOI: 10.1016/j.eswa.2022.118268] [Reference Citation Analysis]
5 Wazeer A, Das A, Sinha A, Inaba K, Ziyi S, Karmakar A. Additive manufacturing in biomedical field: a critical review on fabrication method, materials used, applications, challenges, and future prospects. Prog Addit Manuf 2022. [DOI: 10.1007/s40964-022-00362-y] [Reference Citation Analysis]
6 Javaid M, Haleem A, Singh RP, Suman R. 3D printing applications for healthcare research and development. Global Health Journal 2022. [DOI: 10.1016/j.glohj.2022.11.001] [Reference Citation Analysis]
7 Abusalim S, Zakaria N, Islam MR, Kumar G, Mokhtar N, Abdulkadir SJ. Analysis of Deep Learning Techniques for Dental Informatics: A Systematic Literature Review. Healthcare 2022;10:1892. [DOI: 10.3390/healthcare10101892] [Reference Citation Analysis]
8 Foroughi S, Derayatifar M, Habibi M, Packirisamy M. Developments and Trends in Additively Manufactured Medical Devices. Additive Manufacturing in Biomedical Applications 2022. [DOI: 10.31399/asm.hb.v23a.a0006902] [Reference Citation Analysis]
9 Bertran Faus A, Cordero Bayo J, Velasco-Ortega E, Torrejon-Moya A, Fernández-Velilla F, García F, López-López J. Customized Titanium Mesh for Guided Bone Regeneration with Autologous Bone and Xenograft. Materials (Basel) 2022;15:6271. [PMID: 36143583 DOI: 10.3390/ma15186271] [Reference Citation Analysis]
10 Tigmeanu CV, Ardelean LC, Rusu LC, Negrutiu ML. Additive Manufactured Polymers in Dentistry, Current State-of-the-Art and Future Perspectives-A Review. Polymers (Basel) 2022;14:3658. [PMID: 36080732 DOI: 10.3390/polym14173658] [Reference Citation Analysis]
11 Elnaghy R, Amin SA, Hasanin M. Evaluating the accuracy of intraoral direct digital impressions in 2 infants with unilateral cleft lip and palate compared with digitized conventional impression. American Journal of Orthodontics and Dentofacial Orthopedics 2022;162:403-9. [DOI: 10.1016/j.ajodo.2021.09.015] [Reference Citation Analysis]
12 Suganna M, Kausher H, Rownaq Ali ABM, Abed MM, Albishi WS, Al Hajji FA, Sultan NA. Knowledge on Applications of 3D Design and Printing in Dentistry Among Dental Practitioners in Saudi Arabia: A Questionnaire-Based Survey. Cureus 2022. [DOI: 10.7759/cureus.28379] [Reference Citation Analysis]
13 Zeller AN, Goetze E, Thiem DGE, Bartella AK, Seifert L, Beiglboeck FM, Kröplin J, Hoffmann J, Pabst A. A survey regarding the organizational aspects and quality systems of in-house 3D printing in oral and maxillofacial surgery in Germany. Oral Maxillofac Surg 2022. [PMID: 35989406 DOI: 10.1007/s10006-022-01109-3] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
14 Muskan, Gupta D, Negi NP. 3D bioprinting: Printing the future and recent advances. Bioprinting 2022;27:e00211. [DOI: 10.1016/j.bprint.2022.e00211] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
15 Ahmad S, Hasan N, Fauziya, Gupta A, Nadaf A, Ahmad L, Aqil M, Kesharwani P. Review on 3D printing in dentistry: conventional to personalized dental care. Journal of Biomaterials Science, Polymer Edition 2022. [DOI: 10.1080/09205063.2022.2099666] [Reference Citation Analysis]
16 Alamo L, Cassiano FB, Bordini EAF, Stuani VT, Pacheco LE, Gallinari MO, Souza Costa CA, Mondelli RFL, Soares DG. An organotypic model of oral mucosa cells for the biological assessment of 3D-printed resins for interim restorations. J Prosthet Dent 2022:S0022-3913(22)00273-6. [PMID: 35864023 DOI: 10.1016/j.prosdent.2022.04.017] [Reference Citation Analysis]
17 Huang J, Ye W, Ye G, Jia Q, Li K, Kong J, Jiang HB, Lan Q, Yu L, Huang L. Mechanical Properties and Accuracy Evaluation of 3D Printing Based on Value in the Munsell Color System. Advances in Materials Science and Engineering 2022;2022:1-9. [DOI: 10.1155/2022/2713524] [Reference Citation Analysis]
18 Shi Y, Liu J, Du M, Zhang S, Liu Y, Yang H, Shi R, Guo Y, Song F, Zhao Y, Lan J. Customized Barrier Membrane (Titanium Alloy, Poly Ether-Ether Ketone and Unsintered Hydroxyapatite/Poly-l-Lactide) for Guided Bone Regeneration. Front Bioeng Biotechnol 2022;10:916967. [DOI: 10.3389/fbioe.2022.916967] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
19 Huang W, Yang J, Li Y. Cone-beam computed tomography three-dimensional reconstruction aids treatment of three root canals with severe curvature in maxillary first premolar: a case report. J Int Med Res 2022;50:3000605221105361. [PMID: 35722910 DOI: 10.1177/03000605221105361] [Reference Citation Analysis]
20 Nulty A. A comparison of trueness and precision of 12 3D printers used in dentistry. BDJ Open 2022;8:14. [PMID: 35618716 DOI: 10.1038/s41405-022-00108-6] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 2.0] [Reference Citation Analysis]
21 Alageel O. Three-dimensional printing technologies for dental prosthesis: a review. RPJ 2022. [DOI: 10.1108/rpj-07-2021-0164] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 2.0] [Reference Citation Analysis]
22 Rouf S, Malik A, Singh N, Raina A, Naveed N, Siddiqui MIH, Haq MIU. Additive manufacturing technologies: industrial and medical applications. Sustainable Operations and Computers 2022. [DOI: 10.1016/j.susoc.2022.05.001] [Cited by in Crossref: 2] [Cited by in F6Publishing: 1] [Article Influence: 2.0] [Reference Citation Analysis]
23 Costamagna P, Carpegna G, Bianchi C, Baldi A, Pasqualini D, Scotti N, Alovisi M. Endodontic Treatment of a Molar with Peculiar Anatomy: Case Study with CBCT and 3D Printed Model. The Journal of Contemporary Dental Practice 2021;22:1477-82. [DOI: 10.5005/jp-journals-10024-3175] [Reference Citation Analysis]
24 Dobroś K, Hajto-Bryk J, Zarzecka J. Application of 3D-printed teeth models in teaching dentistry students: A scoping review. Eur J Dent Educ 2022. [PMID: 35108452 DOI: 10.1111/eje.12784] [Cited by in Crossref: 1] [Cited by in F6Publishing: 2] [Article Influence: 1.0] [Reference Citation Analysis]
25 Shi J, Fu S, Cavagnaro MJ, Xu S, Zhao M. 3D Printing Improve the Effectiveness of Fracture Teaching and Medical Learning: A Comprehensive Scientometric Assessment and Future Perspectives. Front Physiol 2021;12:726591. [PMID: 35002749 DOI: 10.3389/fphys.2021.726591] [Cited by in Crossref: 1] [Cited by in F6Publishing: 2] [Article Influence: 1.0] [Reference Citation Analysis]
26 Loges K, Tiberius V. Implementation Challenges of 3D Printing in Prosthodontics: A Ranking-Type Delphi. Materials (Basel) 2022;15:431. [PMID: 35057149 DOI: 10.3390/ma15020431] [Cited by in Crossref: 1] [Article Influence: 1.0] [Reference Citation Analysis]
27 Dhingra K, Makker K, Verma F, Gumber B. Applications of 3D Printing in Periodontal Tissue Regeneration. 3D Printing in Oral Health Science 2022. [DOI: 10.1007/978-3-031-07369-4_7] [Reference Citation Analysis]
28 Kim Y, Jha N, Gupta S, Zvirin A, Qendro A, Zere E, Sokhi RK, Naveen KS, Sharan J, Sinha S, Anil S, Chaudhari PK. Principles and Applications of Various 3D Scanning Methods for Image Acquisition for 3D Printing Applications in Oral Health Science. 3D Printing in Oral Health Science 2022. [DOI: 10.1007/978-3-031-07369-4_2] [Reference Citation Analysis]
29 Christina H, Maria B, Athina B, Petros K. 3D printing in dentistry with emphasis on prosthetic rehabilitation and regenerative approaches. 3D Printing: Applications in Medicine and Surgery Volume 2 2022. [DOI: 10.1016/b978-0-323-66193-5.00009-5] [Cited by in Crossref: 1] [Article Influence: 1.0] [Reference Citation Analysis]
30 Kuo R, Lin Y, Yang T, Nguyen A. 3D Printing: Limitations, Safety, and Regulatory Considerations for Oral Health Science. 3D Printing in Oral Health Science 2022. [DOI: 10.1007/978-3-031-07369-4_13] [Reference Citation Analysis]
31 Nanda A, Iyer S, Kattadiyil MT, Jain V, Kaur H, Koli D. Contemporary Applications of 3D Printing in Prosthodontics. 3D Printing in Oral Health Science 2022. [DOI: 10.1007/978-3-031-07369-4_8] [Reference Citation Analysis]
32 Belsure N, Parekh S, Soni N. An Overview of 3D Printable Materials for Dental and Craniofacial Applications. 3D Printing in Oral Health Science 2022. [DOI: 10.1007/978-3-031-07369-4_4] [Reference Citation Analysis]
33 Sokhi RK, Monga N, Almerco KKA, Shastri D, Bajracharya M, Pyakurel U, Alam MM, Chaudhari PK. Commonly Used 3D Printing Technologies in Oral Health Science. 3D Printing in Oral Health Science 2022. [DOI: 10.1007/978-3-031-07369-4_3] [Reference Citation Analysis]
34 Kulood M, Tyagi R, Kalra N, Khatri A, Garg N. Three-dimensional printing: Fine-tuning of the face of pediatric dentistry. SRM J Res Dent Sci 2022;13:25. [DOI: 10.4103/srmjrds.srmjrds_6_22] [Reference Citation Analysis]
35 Yun Y, Park M, Park S, Park C, Jang W, Lee S. Fabrication of complete denture by stereolithography-based 3D printing: a case report. Oral Biol Res 2021;45:231-236. [DOI: 10.21851/obr.45.04.202112.231] [Reference Citation Analysis]
36 Maricic S, Kovacevic Pavicic D, Ptacnik B, Druzeta R. Additive manufacturing technology in dental education. RPJ 2021;27:1700-1708. [DOI: 10.1108/rpj-05-2020-0088] [Reference Citation Analysis]
37 Uoshima K, Akiba N, Nagasawa M. Technical skill training and assessment in dental education. Jpn Dent Sci Rev 2021;57:160-3. [PMID: 34567290 DOI: 10.1016/j.jdsr.2021.08.004] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
38 Cohen J, Bektas CK, Mullaghy A, Perera MM, Gormley AJ, Kohn J. Tyrosol-Derived Biodegradable Inks with Tunable Properties for 3D Printing. ACS Biomater Sci Eng 2021;7:4454-62. [PMID: 34396772 DOI: 10.1021/acsbiomaterials.1c00464] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
39 Grover D, Kaur N, Kaur G. Future dental device- 3-dimensional printing approach in dentistry. IJMI 2021;7:37-47. [DOI: 10.18231/j.ijmi.2021.009] [Reference Citation Analysis]
40 Tian Y, Chen C, Xu X, Wang J, Hou X, Li K, Lu X, Shi H, Lee ES, Jiang HB. A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications. Scanning 2021;2021:9950131. [PMID: 34367410 DOI: 10.1155/2021/9950131] [Cited by in Crossref: 24] [Cited by in F6Publishing: 32] [Article Influence: 24.0] [Reference Citation Analysis]
41 Arslan B, Nalbant L, Nalbant AD, Nadirov M. ÜÇ BOYUTLU YAZICILARIN DENTAL KULLANIMINDA GÜNCEL PROTETİK YAKLAŞIMLAR. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 2021. [DOI: 10.17567/ataunidfd.804342] [Reference Citation Analysis]
42 Daoud GE, Pezzutti DL, Dolatowski CJ, Carrau RL, Pancake M, Herderick E, VanKoevering KK. Establishing a point-of-care additive manufacturing workflow for clinical use. J Mater Res 2021;:1-20. [PMID: 34248272 DOI: 10.1557/s43578-021-00270-x] [Cited by in Crossref: 3] [Cited by in F6Publishing: 3] [Article Influence: 3.0] [Reference Citation Analysis]
43 Wang X, Shujaat S, Shaheen E, Jacobs R. Accuracy of desktop versus professional 3D printers for maxillofacial model production. A systematic review and meta-analysis. J Dent 2021;:103741. [PMID: 34224792 DOI: 10.1016/j.jdent.2021.103741] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 2.0] [Reference Citation Analysis]
44 Beyer T, Bailey DL, Birk UJ, Buvat I, Catana C, Cheng Z, Fang Q, Giove F, Kuntner C, Laistler E, Moscato F, Nekolla SG, Rausch I, Ronen I, Saarakkala S, Thielemans K, van Elmpt W, Moser E. Medical Physics and Imaging–A Timely Perspective. Front Phys 2021;9:634693. [DOI: 10.3389/fphy.2021.634693] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
45 Alrashdi M, Hameed A, Aljabr A. COVID-19 and a Call to Adapt Dental Education. Front Dent Med 2021;2:664460. [DOI: 10.3389/fdmed.2021.664460] [Cited by in Crossref: 1] [Cited by in F6Publishing: 4] [Article Influence: 1.0] [Reference Citation Analysis]
46 Shujaat S, da Costa Senior O, Shaheen E, Politis C, Jacobs R. Visual and haptic perceptibility of 3D printed skeletal models in orthognathic surgery. J Dent 2021;109:103660. [PMID: 33848559 DOI: 10.1016/j.jdent.2021.103660] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 2.0] [Reference Citation Analysis]
47 Sun W, Chen H, Zhong Y, Zhang W, Chu F, Li L, Chen Y, Wang X, Wang Q, Wang Y, Wei Y, Liu L, Xu Y. Three-Dimensional Tooth Models with Pulp Cavity Enhance Dental Anatomy Education. Anat Sci Educ 2021. [PMID: 33829672 DOI: 10.1002/ase.2085] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
48 Kumar R, Kumar M, Chohan JS. The role of additive manufacturing for biomedical applications: A critical review. Journal of Manufacturing Processes 2021;64:828-50. [DOI: 10.1016/j.jmapro.2021.02.022] [Cited by in Crossref: 47] [Cited by in F6Publishing: 53] [Article Influence: 47.0] [Reference Citation Analysis]
49 Han Y, Wei Q, Chang P, Hu K, Okoro OV, Shavandi A, Nie L. Three-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application. Crystals 2021;11:353. [DOI: 10.3390/cryst11040353] [Cited by in Crossref: 18] [Cited by in F6Publishing: 20] [Article Influence: 18.0] [Reference Citation Analysis]
50 Khorsandi D, Fahimipour A, Abasian P, Saber SS, Seyedi M, Ghanavati S, Ahmad A, De Stephanis AA, Taghavinezhaddilami F, Leonova A, Mohammadinejad R, Shabani M, Mazzolai B, Mattoli V, Tay FR, Makvandi P. 3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications. Acta Biomater 2021;122:26-49. [PMID: 33359299 DOI: 10.1016/j.actbio.2020.12.044] [Cited by in Crossref: 67] [Cited by in F6Publishing: 49] [Article Influence: 67.0] [Reference Citation Analysis]
51 Kim J, Lee DH, Markiewicz MR, Al-Jewair T, Andreana S, Arany PR. Additive 3-dimensional printing as a novel tool for pre- and postsurgical evaluation and patient education: A clinical case series. J Am Dent Assoc 2021;152:567-575.e5. [PMID: 33622522 DOI: 10.1016/j.adaj.2020.10.009] [Reference Citation Analysis]
52 Sabbah A, Romanos G, Delgado-Ruiz R. Impact of Layer Thickness and Storage Time on the Properties of 3D-Printed Dental Dies. Materials (Basel) 2021;14:509. [PMID: 33494397 DOI: 10.3390/ma14030509] [Cited by in Crossref: 7] [Cited by in F6Publishing: 7] [Article Influence: 7.0] [Reference Citation Analysis]
53 Khoperskov AV, Radchenko VP. Additive technologies in implant dentistry: 3D printing in metal and simulation of strength characteristics. INTERNATIONAL CONFERENCE ON FOOD SCIENCE AND BIOTECHNOLOGY (FSAB 2021) 2021. [DOI: 10.1063/5.0067877] [Reference Citation Analysis]
54 Oberoi G, Agis H. 3D Printing in Endodontics. Guided Endodontics 2021. [DOI: 10.1007/978-3-030-55281-7_5] [Reference Citation Analysis]
55 Bajpai A, Baigent A, Raghav S, Brádaigh CÓ, Koutsos V, Radacsi N. 4D Printing: Materials, Technologies, and Future Applications in the Biomedical Field. Sustainability 2020;12:10628. [DOI: 10.3390/su122410628] [Cited by in Crossref: 26] [Cited by in F6Publishing: 26] [Article Influence: 13.0] [Reference Citation Analysis]
56 Joseph JR, Merrett S, Rogers S, Clark P. Use of 3D printing in the planning of a patient with unerupted maxillary central incisors. J Orthod 2021;48:183-9. [PMID: 33325266 DOI: 10.1177/1465312520978984] [Reference Citation Analysis]
57 Bulut AC. Düşük Maliyetli, Üç Boyutlu Bir Yazıcı Kullanılarak Oluşturulan Diş Modellerinin Değerlendirilmesi. Kırıkkale Üniversitesi Tıp Fakültesi Dergisi 2020. [DOI: 10.24938/kutfd.816824] [Reference Citation Analysis]
58 Krämer Fernandez P, Kuscu E, Weise H, Engel EM, Spintzyk S. Rapid additive manufacturing of an obturator prosthesis with the use of an intraoral scanner: A dental technique. J Prosthet Dent 2020:S0022-3913(20)30602-8. [PMID: 33276962 DOI: 10.1016/j.prosdent.2020.07.033] [Cited by in Crossref: 4] [Cited by in F6Publishing: 2] [Article Influence: 2.0] [Reference Citation Analysis]
59 Vokulova VY, Zhulev E. Results of studying the dimensional accuracy of the bases of complete removable prostheses made using 3D printing and traditional technologies. IDR 2020. [DOI: 10.35556/idr-2020-4(93)34-39] [Reference Citation Analysis]
60 Han J, Tong J, Tian X, Xia L, Ma D. Thermal Simulation and Warping Deformation Experimental Study of PEEK in Material Extrusion. Macromol Theory Simul 2021;30:2000055. [DOI: 10.1002/mats.202000055] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 1.0] [Reference Citation Analysis]
61 Anunmana C, Ueawitthayasuporn C, Kiattavorncharoen S, Thanasrisuebwong P. In Vitro Comparison of Surgical Implant Placement Accuracy Using Guides Fabricated by Three Different Additive Technologies. Applied Sciences 2020;10:7791. [DOI: 10.3390/app10217791] [Cited by in Crossref: 6] [Cited by in F6Publishing: 6] [Article Influence: 3.0] [Reference Citation Analysis]
62 Li L, Lee J, Amara HB, Lee JB, Lee KS, Shin SW, Lee YM, Kim B, Kim P, Koo KT. Comparison of 3D-Printed Dental Implants with Threaded Implants for Osseointegration: An Experimental Pilot Study. Materials (Basel) 2020;13:E4815. [PMID: 33126589 DOI: 10.3390/ma13214815] [Cited by in Crossref: 3] [Cited by in F6Publishing: 3] [Article Influence: 1.5] [Reference Citation Analysis]
63 Etemad-Shahidi Y, Qallandar OB, Evenden J, Alifui-Segbaya F, Ahmed KE. Accuracy of 3-Dimensionally Printed Full-Arch Dental Models: A Systematic Review. J Clin Med 2020;9:E3357. [PMID: 33092047 DOI: 10.3390/jcm9103357] [Cited by in Crossref: 42] [Cited by in F6Publishing: 43] [Article Influence: 21.0] [Reference Citation Analysis]
64 Kim H, Kim J, Lee J, Cha H, Baik J. Three-dimensional printed complete denture fabrication using the scan data from the conventional denture-making process. J Dent Rehabil Appl Sci 2020;36:196-202. [DOI: 10.14368/jdras.2020.36.3.196] [Reference Citation Analysis]
65 Branco AC, Silva R, Jorge H, Santos T, Lorenz K, Polido M, Colaço R, Serro AP, Figueiredo-Pina CG. Tribological performance of the pair human teeth vs 3D printed zirconia: An in vitro chewing simulation study. J Mech Behav Biomed Mater 2020;110:103900. [PMID: 32957205 DOI: 10.1016/j.jmbbm.2020.103900] [Cited by in Crossref: 6] [Cited by in F6Publishing: 8] [Article Influence: 3.0] [Reference Citation Analysis]
66 Höhne C, Jentzsch A, Schmitter M. The "Painting by Numbers Method" for education of students in crown preparation. Eur J Dent Educ 2021;25:261-70. [PMID: 32954628 DOI: 10.1111/eje.12599] [Cited by in Crossref: 5] [Cited by in F6Publishing: 5] [Article Influence: 2.5] [Reference Citation Analysis]
67 Wadher K, Trivedi R, Wankhede N, Kale M, Umekar M. 3D printing in pharmaceuticals: An emerging technology full of challenges. Ann Pharm Fr 2021;79:107-18. [PMID: 32853575 DOI: 10.1016/j.pharma.2020.08.007] [Cited by in Crossref: 4] [Cited by in F6Publishing: 6] [Article Influence: 2.0] [Reference Citation Analysis]
68 Jacob S, Nair AB, Patel V, Shah J. 3D Printing Technologies: Recent Development and Emerging Applications in Various Drug Delivery Systems. AAPS PharmSciTech 2020;21:220. [PMID: 32748243 DOI: 10.1208/s12249-020-01771-4] [Cited by in Crossref: 28] [Cited by in F6Publishing: 29] [Article Influence: 14.0] [Reference Citation Analysis]
69 Bansal A, kukreja N, Trivedi S, Verma J, Bansal J, Sukhija U, Chaudhary D, Thakur A. 3D PRINTING….. A PARADIGM SHIFT IN ENDODONTICS. ijsr 2020. [DOI: 10.36106/ijsr/4929978] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 0.5] [Reference Citation Analysis]
70 Aarthi @ Priyatharshini SS, Angeline Kirubha SP. Development of patient specific 3D printed mandible implant. IOP Conf Ser : Mater Sci Eng 2020;912:062020. [DOI: 10.1088/1757-899x/912/6/062020] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 1.0] [Reference Citation Analysis]
71 Bous RM, Kochenour N, Valiathan M. A novel method for fabricating nasoalveolar molding appliances for infants with cleft lip and palate using 3-dimensional workflow and clear aligners. Am J Orthod Dentofacial Orthop 2020;158:452-8. [PMID: 32709578 DOI: 10.1016/j.ajodo.2020.02.007] [Cited by in Crossref: 7] [Cited by in F6Publishing: 5] [Article Influence: 3.5] [Reference Citation Analysis]
72 Herschdorfer L, Negreiros WM, Gallucci GO, Hamilton A. Comparison of the accuracy of implants placed with CAD-CAM surgical templates manufactured with various 3D printers: An in vitro study. J Prosthet Dent 2021;125:905-10. [PMID: 32499166 DOI: 10.1016/j.prosdent.2020.03.017] [Cited by in Crossref: 19] [Cited by in F6Publishing: 21] [Article Influence: 9.5] [Reference Citation Analysis]
73 Chae YK, Lee H, Jih MK, Lee HS, Lee JW, Kim SH, Kim GT, Choi SC, Nam OH. Validation of a three-dimensional printed model for training of surgical extraction of supernumerary teeth. Eur J Dent Educ 2020;24:637-43. [PMID: 32402151 DOI: 10.1111/eje.12543] [Cited by in Crossref: 7] [Cited by in F6Publishing: 7] [Article Influence: 3.5] [Reference Citation Analysis]
74 Hanisch M, Kroeger E, Dekiff M, Timme M, Kleinheinz J, Dirksen D. 3D-printed Surgical Training Model Based on Real Patient Situations for Dental Education. Int J Environ Res Public Health 2020;17:E2901. [PMID: 32331445 DOI: 10.3390/ijerph17082901] [Cited by in Crossref: 13] [Cited by in F6Publishing: 14] [Article Influence: 6.5] [Reference Citation Analysis]
75 Lerner H, Mouhyi J, Admakin O, Mangano F. Artificial intelligence in fixed implant prosthodontics: a retrospective study of 106 implant-supported monolithic zirconia crowns inserted in the posterior jaws of 90 patients. BMC Oral Health 2020;20:80. [PMID: 32188431 DOI: 10.1186/s12903-020-1062-4] [Cited by in Crossref: 24] [Cited by in F6Publishing: 26] [Article Influence: 12.0] [Reference Citation Analysis]
76 Lee H, Chae YK, Choi S, Jih MK, Lee J, Choi SC, Nam OH. Feasibility of a 3D Surgical Guide Technique for Impacted Supernumerary Tooth Extraction: A Pilot Study with 3D Printed Simulation Models. Applied Sciences 2019;9:3905. [DOI: 10.3390/app9183905] [Cited by in Crossref: 3] [Cited by in F6Publishing: 3] [Article Influence: 1.0] [Reference Citation Analysis]
77 Trenfield SJ, Awad A, Madla CM, Hatton GB, Firth J, Goyanes A, Gaisford S, Basit AW. Shaping the future: recent advances of 3D printing in drug delivery and healthcare. Expert Opin Drug Deliv 2019;16:1081-94. [PMID: 31478752 DOI: 10.1080/17425247.2019.1660318] [Cited by in Crossref: 118] [Cited by in F6Publishing: 96] [Article Influence: 39.3] [Reference Citation Analysis]
78 Tagami T, Hayashi N, Sakai N, Ozeki T. 3D printing of unique water-soluble polymer-based suppository shell for controlled drug release. International Journal of Pharmaceutics 2019;568:118494. [DOI: 10.1016/j.ijpharm.2019.118494] [Cited by in Crossref: 30] [Cited by in F6Publishing: 31] [Article Influence: 10.0] [Reference Citation Analysis]
79 Tuce R, Arjoca S, Neagu M, Neagu A. The use of 3D-printed surgical guides and models for sinus lift surgery planning and education. Journal of 3D printing in medicine 2019;3:145-155. [DOI: 10.2217/3dp-2019-0014] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 0.3] [Reference Citation Analysis]
80 Tao O, Kort-Mascort J, Lin Y, Pham HM, Charbonneau AM, ElKashty OA, Kinsella JM, Tran SD. The Applications of 3D Printing for Craniofacial Tissue Engineering. Micromachines (Basel) 2019;10:E480. [PMID: 31319522 DOI: 10.3390/mi10070480] [Cited by in Crossref: 45] [Cited by in F6Publishing: 49] [Article Influence: 15.0] [Reference Citation Analysis]
81 Oberoi G, Nitsch S, Edelmayer M, Janjić K, Müller AS, Agis H. Materializing! What Can Dentists Do With 3D Printers? Front Young Minds 2019;7. [DOI: 10.3389/frym.2019.00088] [Reference Citation Analysis]
82 Ahangar P, Cooke ME, Weber MH, Rosenzweig DH. Current Biomedical Applications of 3D Printing and Additive Manufacturing. Applied Sciences 2019;9:1713. [DOI: 10.3390/app9081713] [Cited by in Crossref: 124] [Cited by in F6Publishing: 130] [Article Influence: 41.3] [Reference Citation Analysis]