BPG is committed to discovery and dissemination of knowledge
Cited by in F6Publishing
For: Ma J, Xue Y, Liang X, Liao C, Tan Z, Tang B. Bi-directional regulatable mechanical properties of 3D braided polyetheretherketone (PEEK). Materials Science and Engineering: C 2019;103:109811. [DOI: 10.1016/j.msec.2019.109811] [Cited by in Crossref: 8] [Cited by in F6Publishing: 9] [Article Influence: 2.0] [Reference Citation Analysis]
Number Citing Articles
1 Wang J, Wang N, Xu D, Tang L, Sheng B. Flexible humidity sensors composed with electrodes of laser induced graphene and sputtered sensitive films derived from poly(ether-ether-ketone). Sensors and Actuators B: Chemical 2023;375:132846. [DOI: 10.1016/j.snb.2022.132846] [Cited by in Crossref: 1] [Cited by in F6Publishing: 1] [Article Influence: 1.0] [Reference Citation Analysis]
2 Li T, Song Z, Yang X, Du J. Influence of Processing Parameters on the Mechanical Properties of Peek Plates by Hot Compression Molding. Materials (Basel) 2022;16. [PMID: 36614375 DOI: 10.3390/ma16010036] [Reference Citation Analysis]
3 Wu S, Dong T, Li Y, Sun M, Qi Y, Liu J, Kuss MA, Chen S, Duan B. State-of-the-art review of advanced electrospun nanofiber yarn-based textiles for biomedical applications. Appl Mater Today 2022;27:101473. [PMID: 35434263 DOI: 10.1016/j.apmt.2022.101473] [Cited by in Crossref: 18] [Cited by in F6Publishing: 15] [Article Influence: 18.0] [Reference Citation Analysis]
4 Li S, Wang T, Hu J, Wang B, Li Y, Wang L, Li G, Zhang J, Zhou Z. Effect of hydroxyapatite content and particle size on the mechanical behaviors and osteogenesis in vitro of polyetheretherketone–hydroxyapatite composite. Polymer Composites 2021;42:6512-22. [DOI: 10.1002/pc.26317] [Cited by in Crossref: 7] [Cited by in F6Publishing: 8] [Article Influence: 3.5] [Reference Citation Analysis]
5 Li S, Li G, Hu J, Wang B, Wang L, Wang H, Chen R, Zhou Z. Porous polyetheretherketone-hydroxyapatite composite: A candidate material for orthopedic implant. Composites Communications 2021;28:100908. [DOI: 10.1016/j.coco.2021.100908] [Cited by in Crossref: 5] [Cited by in F6Publishing: 3] [Article Influence: 2.5] [Reference Citation Analysis]
6 Wu S, Liu J, Cai J, Zhao J, Duan B, Chen S. Combining electrospinning with hot drawing process to fabricate high performance poly (L-lactic acid) nanofiber yarns for advanced nanostructured bio-textiles. Biofabrication 2021;13. [PMID: 34450602 DOI: 10.1088/1758-5090/ac2209] [Cited by in Crossref: 9] [Cited by in F6Publishing: 9] [Article Influence: 4.5] [Reference Citation Analysis]
7 Ma J, Li Z, Xue Y, Liang X, Tan Z, Tang B. Novel PEEK/nHA composites fabricated by hot-pressing of 3D braided PEEK matrix. Adv Compos Hybrid Mater 2020;3:156-66. [DOI: 10.1007/s42114-020-00147-3] [Cited by in Crossref: 19] [Cited by in F6Publishing: 19] [Article Influence: 6.3] [Reference Citation Analysis]
8 Baştan FE. Fabrication and characterization of an electrostatically bonded PEEK- hydroxyapatite composites for biomedical applications. J Biomed Mater Res B Appl Biomater 2020;108:2513-27. [PMID: 32052943 DOI: 10.1002/jbm.b.34583] [Cited by in Crossref: 11] [Cited by in F6Publishing: 11] [Article Influence: 3.7] [Reference Citation Analysis]
9 Pragya A, Singh H, Kumar B, Gupta H, Shankar P. Designing and investigation of braided-cum-woven structure for wearable heating textile. Eng Res Express 2020;2:015003. [DOI: 10.1088/2631-8695/ab63f3] [Cited by in Crossref: 14] [Cited by in F6Publishing: 14] [Article Influence: 4.7] [Reference Citation Analysis]
10 Zong X, Ruan J, Liu H, Sun W, Liu Y. Rapid injection moulding process of polyether ether ketone based on stereolithography. SN Appl Sci 2019;1:1388. [DOI: 10.1007/s42452-019-1385-4] [Cited by in Crossref: 2] [Cited by in F6Publishing: 2] [Article Influence: 0.5] [Reference Citation Analysis]