Evaluation of mitral chordae tendineae length using four-dimensional computed tomography

Figure 1 Method of measuring mitral chordae tendineae length. A: The cA was identified after obtaining an overall view of the mitral valve structure on a three-dimensional (3D) image created on the workstation; B: The attachment sites of the cA valve leaflet and papillary muscle were marked on the 3D image, and the marks in the corresponding positions were shown on the two-dimensional (2D)-multi-planar reformatting (MPR) image. The angle of the cross-section was adjusted so that the two marks appear simultaneously in the 2D-MPR image in three directions; C: The distance between the marks in the 2D-MPR image was measured using the measurement tool. The above procedure was also performed for the primary chordae tendineae from the posterior papillary muscle to the A2-3 region, and measurements were made over 11 time phases from 0% to 50%. White arrow: The primary chordae tendineae from the anterior papillary muscle to the A1-2 region (cA). LA: Left atrium; LV: Left ventricle; APM: Anterior papillary muscle; PPM: Posterior papillary muscle; MV: Mitral valve; AC: Anterior commissure; PC: Posterior commissure.